Stability Test Chamber BTST-102
www.biolabscientific.com 5
01Safety tips
Please do not use the instrument outdoors.
The instrument should be installed on the solid ground. If the ground is not solid, or the installation
site is unsuitable, the instrument is likely to overturn, thus hurting operators and other people.
Please do not install the instrument in humid areas or areas close to water. Otherwise, the insulation
performance will decline, thus leading to accident of electricity leakage or electric shock.
Please use power sockets connected with earth wire in case of electric shock. If power sockets are not
connected with earth wire, please ask qualied technicians to connect them with earth wire.
The instrument can not be earthed through gas supply pipe, water supply pipe, telephone line, or
lightning arrester, which is likely to lead to electric shock at their openings.
Please do not place volatile or ammable articles in the instrument. Otherwise, explosion or re may
occur.
Please do not insert metal articles such as iron nail or wire into any hole or clearance of the instrument,
or into air outlet of internal air recycling ring. Otherwise, electric shock or injury may happen due to
the blocking and accidental contact of the above articles.
The working site of the instrument should have the good ventilation. If the ventilation is restricted,
other measures should be adopted to guarantee the safe working environment.
When placing harmful, toxic, and radioactive articles, please use the instrument within the safe area.
Improper use will do harm to human health and the environment.
Before repairing or maintaining the instrument, please cut o the power supply to avoid electric
shock or other injuries.
Without permission, users can not disassemble, repair, or ret the equipment on their own. Otherwise,
re or personnel injury may take place due to improper operation.
If the instrument does not function well, please turn o the instrument and pull down the power
source. Operation under abnormal situation may lead to electric shock or re.
Please do not damage power sockets or power wires. Please do not touch any electric component
and switch when your hands are wet, which is likely to result in electric shock.
Please do not place vessels or articles containing water on the instrument. If the articles fall down,
they will hurt operators, and water contained will give rise to electricity leakage or electric shock.
When moved, the instrument can not overturn, in order to prevent damage of the equipment or hurt
of operators.
When the instrument is not used for long time, power pins should be pulled out. Deterioration of
insulators will lead to electric shock, electricity leakage, or re.
