2 BinTec Communications AG
Purpose This manual explains the installationand initial configuration ofX3200 with soft-
ware release 5.5.1. For up-to-the-minute information and instructions concern-
ing the latest software release, you should always read our release notes,
especially when carrying out a software update to a later release level. The lat-
est release notes can always be found at www.bintec.net.
Liability While every effort has been made to ensure the accuracy of all information in
this manual, BinTec Communications AG cannot assume liability to any party
for any loss or damage caused by errors or omissions or by statements of any
kind in this document and is only liable within the scope of its terms of sale and
delivery.
The information in this manual is subject to change without notice. Additional in-
formation, including changes and release notes for X3200, can be found at
www.bintec.net.
As an ISDN multiprotocol router, X3200 sets up ISDN connections in accor-
dance with the system configuration. To prevent unintentional charges accumu-
lating, the operation of the product should be carefully monitored. BinTec
Communications AG accepts no liability for loss of data, unintentional connec-
tion costs and damages resulting from unsupervised operation of the product.
Trademarks BinTec and the BinTec logo are registered trademarks of BinTec Communica-
tions AG.
Other product namesand trademarks mentioned are usually theproperty of the
respective companies and manufacturers.
Copyright All rights are reserved. No part of this publication may be reproduced or trans-
mitted in any form or by any means – graphic, electronic, or mechanical – in-
cluding photocopying, recording in any medium, taping, or storage in
information retrieval systems, without the prior written permission of BinTec
Communications AG. Adaptation and especially translation of the document is
inadmissible without the prior consent of BinTec Communications AG.
Guidelines and
standards X3200 complies with the following guidelines and standards:
■R&TTE Directive 1999/5/EC
■CE marking for all EU countries
For further information, see "Declaration of Conformity" at www.bintec.net.
