
8156789101112131416(12)(13)(14)FUEL STATUS INDICATOR –Red light ashes when the fuel supply is abnormal.(2)(3)(4)(5)120 Volt AC, 20 Amp Duplex (NEMA 5-20R) –May be used to supply electrical power for theoperation of 120 Volt AC, 20 Amp, single phase60 Hz electrical loads.120 Volt AC, 30 Amp Receptacle (NEMA TT-30R)– May be used to supply electrical power for theoperation of 120 Volt AC, 30 Amp, single phase60 Hz electrical loads.(6)Parallel Outlets-used for parallel operation.Fuel Valve KnobEngine SwitchLPG Hose Quick Connect InletBattery Switch(15)15(16)LPGRed light flashes when the fuel s uppl y is abnormalFUEL STATUS INDICATORCAUTION:DO NOT disconnect parallel cables while generator is running PARALLEL OPERATING SYSTEMONOFFECONOMYAC RESETCIRCUIT BREAKERDCCIRCUIT BREAKERSONOFF Disconnect while stop using LPGCAUTION:LPGGASAC 120VAC 120V8A30A20ADC 12V 8.3AOVERLOADOUTPUT123START-Start ModeON-Standby Mode-OFF-Stop ModeGAS OFFReset-When you’ve overloaded the generator, the overload light will stay on and cut off the output in 3 to 30 seconds, depending on the load. Reduce the load by turning off and disconnecting your electrical device(s) press the reset button to reset the circuit. If no power is produced after resetting, turn off and disconnect all electrical devices andrestart your generator.circuit breaker will activate when the NEMA 5-20 outlets exceed 20A.The 30-amp AC circuit breaker will activate when the NEMA TT-30R outlets exceed 30A.The 8-amp DC circuit breaker will activate when the DC 12V and USB outlets exceed 8A. When the circuit breaker activates, turn off and disconnect the device from its respective outlet, and press the circuit breaker to reset.The 20-amp AC