Billion BiPAC 7401VP/VGP User manual
BiPAC 7401VP/VGP
VoIP/(802.11g) ADSL2+ Router
Quick Start Guide
Billion VoIP/(802.11g) ADSL2+ Router
1
Do not use this router in high humidity or high temperatures.
Do not use the same power source for this router as other
equipment.
Do not open or repair the case yourself. If this router is too hot,
turn off the power immediately and have it repaired at a qualified
service center.
Avoid using this product and all accessories outdoors.
For more detailed instructions on configuring and usin
g
th
e
Billion VoIP/(802.11g) ADSL2+ Router, please refer to the on-
line manual.
Package Contents
VoIP/(802.11g) ADSL2+ Router
CD-ROM containing the user manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
Console tool
Adetachable Antenna (Wireless router only)
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide
Warning
Place this router on a stable surface.
Only use th
different voltage rating pow
e power adapter that comes with the package. Using a
er adaptor may damage this router.
A
ttention
Quick Start Guide
The Front LEDs
LED Meaning
1 PWR Lit when power is ON.
2 SYS Lit when the system is ready.
3 – 6 Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
LAN Port
1X — 4X
(RJ-45 connector) Blinking when data is Transmitted / Received.
8 WLAN Lit green when the wireless connection is established.
(Wireless router only) Flashes when sending/receiving data.
9 Phone
(RJ-11 connector) Lit green when the phone is off-hook.
10 LINE Lit when the inbound and outbound calls transmitted
through PSTN.
11 VoIP Lit when SIP registration is OK.
12 ADSL Lit when successfully connected to an ADSL DSLAM
(“linesync”).
13 PPP / MAIL
Lit steady when there is a PPPoA / PPPoE connection.
Lit and flashed periodically when there is email in the Inbox.
2
Billion VoIP/(802.11g) ADSL2+ Router
The Rear Ports
6 5 31
2
8 7 4
The Ethernet Port # 4 can be connected to the computer and console. You need a special
console tool which is included in this package to connect the LAN cable of Port 4 when
connecting to a PC’s RS-232 port (9-pin serial port).
Port Meaning
1 Power Switch Power ON/OFF switch
2 Power Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
1-3 seconds: reset the device
6 seconds above, and power off, power on the device: restore to
factory default settings (this is used when you can not login to
the router, e.g. forgot the password)
4 LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
5 Phone
(RJ-11 connector) Connect RJ-11 cable to this port when connecting to an analog
phone set.
6 LINE Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
7 ADSL Connect the supplied RJ-11 (“telephone”) cable to this port
when connecting to the ADSL/telephone network.
8 Antenna
(Wireless router only) Connect the detachable antenna to this port.
3
Quick Start Guide
Connecting Your ADSL Router
1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.
Connect more
computers
Analog Phone
ADSL
Splitter
ADSL Phone
Line
Switching/
HUB
(802.11g is not supported in BiPAC 7401VP)
4
Billion VoIP/(802.11g) ADSL2+ Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
6
Billion VoIP/(802.11g) ADSL2+ Router
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and
click OK to finish the configuration.
7
Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
8
This manual suits for next models
2
Table of contents
Other Billion Network Router manuals
Billion
Billion BiPAC 7404VGP User manual
Billion
Billion BEC MX-1000 User manual
Billion
Billion BiPAC 7404VNOX User manual
Billion
Billion BiPAC 7300G RA User manual
Billion
Billion BiPAC 7402G User manual
Billion
Billion BiPAC 7202GR2 User manual
Billion
Billion BiPAC 7300M User manual
Billion
Billion BiPAC 7402G User manual
Billion
Billion BiPAC 7401VP User manual
Billion
Billion BiPAC 7800 User manual
Billion
Billion BiPAC 7800NL User manual
Billion
Billion BiPAC 5210S User manual
Billion
Billion BiPAC 7402G User manual
Billion
Billion BiPAC 4700ZU User manual
Billion
Billion myguard 6700G User manual
Billion
Billion myGuard 7202 User manual
Billion
Billion BiPAC 8800NL R2 Setup guide
Billion
Billion BiPAC 7401V(G)PX User manual
Billion
Billion BiPAC 7401VGP User manual
Billion
Billion BiPAC 6404VP User manual
