Billion BIPAC 6600 User manual
BIPAC 6600
Broadband Firewall Router
Quick Start Guide
Billion BIPAC 6600 Broadband Firewall Router
For more detailed instructions on configuring and using
the Broadband Firewall Router, please refer to the on-line
manual.
Package Contents
BIPAC 6600 Broadband Firewall Router
CD-ROM containing the online manual
Ethernet (CAT-5 LAN) Cable
AC-AC power adapter (9V AC, 1A)
This Quick Start Guide
Warning
Do not use the BIPAC 6600 in high humidity or high
temperatures.
Do not use the same power source for the BIPAC 6600 as othe
r
equipment.
Do not open or repair the case yourself. If the BIPAC 6600 is
too hot, turn off the power immediately and have it repaired at a
qualified service center.
Avoid using this product and all accessories outdoors.
A
ttention
Place the BIPAC 6600 on a stable surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
1
Quick Start Guide
The Front LEDs
LED Meaning
1 PWR Lit green when power adapter is connected.
2 SYS Lit when the system is ready
3 WAN Lit green when connected at 100 Mbps.
Lit orange when connected at 10 Mbps.
Flashes when sending/receiving data.
4 PPP Lit green when PPPoE connection is established.
5 LAN Lit green when the relevant LAN link is connected.
2
5
1 3
4
2
Billion BIPAC 6600 Broadband Firewall Router
The Rear Ports
3
4 2
31
Port Meaning
1 PWR Connect the supplied power adapter to this jack.
2 RESET Press it to restore the factory default setting back.
3 WAN
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when connecting to a
hub.
Connect a crossover cable to this port when connecting to a
DSL/Cable bridge or modem for establishing WAN connections.
4 LAN
(RJ-45
connector)
Connect the supplied crossover cable to the relevant LAN port
when connecting to a NIC (Network Interface card) in PC.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as a home network.
Connecting Your Broadband Router
1. Connect the Router to a LAN (Local Area Network) and the WAN network.
2. Power on the device.
3. Make sure the PWR, SYS, WAN LEDs are lit steadily and the relevant LAN LED is lit.
Quick Start Guide
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
4
Billion BIPAC 6600 Broadband Firewall Router
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5
Quick Start Guide
Configuring Your Broadband Firewall Router
To configure this device, you must have IE 5.0 /
Netscape 4.5 or above installed
Verifying Your Local Network Connection with the Device
To see if this Router is visible on
the local network, go to Start /
Run.In the Run dialog box, type
“ping 192.168.1.254” then
press OK.
A command prompt window will
pop out. If your ping is
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
6
Billion BIPAC 6600 Broadband Firewall Router
Connecting to the Router
1. Open the web browser and type
http://192.168.1.254 in the browser’s
address box. This number is the default IP
address for this router. Press Enter.
2. A username and password window will
appear. Press OK to proceed if you do not
set any user name and password.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User Manual.If
you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
Contact Billion
WORLDWIDE
http://www.billion.com
7
Other manuals for BIPAC 6600
1
Table of contents
Other Billion Network Router manuals
Billion
Billion BiPAC 7404V series User manual
Billion
Billion BiPAC 6404VGP R3 User manual
Billion
Billion BiPAC VGL User manual
Billion
Billion Router User manual
Billion
Billion BiPAC 7404VGOX User manual
Billion
Billion BiPAC 7300N User manual
Billion
Billion BiPAC 7404V series User manual
Billion
Billion BiPAC 8900X R3 User manual
Billion
Billion BiPAC 7402R2 User manual
Billion
Billion BiPAC 7402NX User manual
Billion
Billion BiPAC 7404VGP User manual
Billion
Billion BiPAC 8800NL R2 Setup guide
Billion
Billion BiPAC 7401VGP User manual
Billion
Billion BiPAC 7402VL User manual
Billion
Billion BiPAC 7800NL User manual
Billion
Billion BiPAC 5200S Series User manual
Billion
Billion BiPAC 8500/8520 User manual
Billion
Billion BiPAC 7404VGO User manual
Billion
Billion myGuard 7500GL User manual
Billion
Billion BiPAC 7401V(G)PX User manual
