Bikemate EC-RLC-01 User manual

bikma®:

HD ﬁction Comercr

with Tail Light

Model Number EC—RLC-Ol

INSTRUCTION MANUAL

Version 07, 2018

AFTER SALES SUPPORT

‘5‘ 69 1800269 981

D. [email protected]

Tollfree MODEL:EC-RL(-01 PRODUCTCODEzéml 03/2019

All manuals and user guides at all-guides.com

all-guides.com

Contents

01. Warranty Details

02. Welcome

03. General Information and Safety Instructions

07. Product Overview

09. Getting Started

‘10perating "studsns

21. CL :5

2L fec‘nmical 33B

21 Care and Maintenance

23. Disposal

24. Repair and Refurbished Goods or Parts Notice

.AFTER SALES SUPPORT

D[email protected]

,‘3‘ ®1800 269 981

MODEL:E(-RL(~01 Pnooucr (ODE: 62282 03/2019 Tollf'ee

All manuals and user guides at all-guides.com

lllé. L

Welcome

All products broughtto you by Bikemate® are manufactured to the

bikemate .

.highest standards of performance and safety, and as part of our

HD ion Cwith Tail Light philosophy of customer service and satisfaction, are backed by our

comprehensive 1Year Warranty.

warranty Detalls We hope you will enjoy using your HD Action Camera with Tail Light

5C'A ’A ,2-

or many year- .- "*1,

Congratulations on choosing to buy aBikemate® product.

mmmn—ﬁm '"4 "', ‘j''TOKEEPUP-TD-DATEWITHIMPOKTMPWI“

The product is guaranteed to be free from defects in workmanship

and parts for aperiod of 12 months from the date of purchase.

Defects that occur within this warranty period, under normal use and

care, will be repaired, replaced or refunded at our discretion. .

The beneﬁts conferred by this warranty are in addition to all rights

and remedies in respect of the product that the consumer has under

the Competition and Consumer Act 2010 and similar state and

territory ans.

Cur goods come .«rtn guarantees that cannot be excluded under the

fact-'2 La.“ Consumer.31» "so are entitled to areplacement or

'e-‘m‘ ‘3' a“etcr ‘31 -‘E 5'»: ‘or :o~‘:—:*sa: o“ ‘o' a“, other

ease-cast. ‘oreseeaae «ass or Jana-9e

:1. we also act: *3 t: have :‘e 930:: 'eo-a 'e-c or replaced if the

Cue-cs ‘21“ t: x:r' axe-mane 31.317, an: :‘e failure 0085 not

"70¢". .. 2. ~33 ICI' ‘ainivirg

5.5.1

mSALE 5mm ‘1

B5“.) 153321-39? .E[email protected]

in"!!! ma mum mooucr (one: 62282 03/2019

2AFTER SALES SUPPORT

iii [email protected] 8®1800 269 981

MODELIEC-RLC-m PRODUCTCODE:6228Z 03/2019 Tollfree

All manuals and user guides at all-guides.com

General information and Safety

‘hSTV'oCT‘Oi‘S

General. Information and Safety

Instructions (Cont)

I; Please 'eac careﬂlm, tf‘roug!" the following informationand keep these

®instructionsin case you neec to 'efer to them later. If you pass the

proc‘uct on to scmeone erse. grease aiso include these instructions.

General Safety Instructions

-Read all instructions before use and save for future reference.

-Check that the device is in good condition and free of damage before

each use.

-DO NOT use the device if it is damaged.

-DO NOT carry out any modiﬁcationsto the appliance.

-If the appliance is used in amanner not speciﬁed by the manufacturer,

the protection by the equipment may be impaired. _.

-DO NOT look directlyat the LED lights when in operation as this can

cause permanent damage to your eyes. \

ACAUTION: DO NOT ingest battery. Chemical Burn Hazard.

Electrical safety

~New battery must be fully charged before they are used for the ﬁrst time.

-Before each use, make sure the dust cover is ﬁrmly closed.

.Keep the USB charging cable in aclean and dry place.

.The USB charging cable is designed for indoor use only.

-DO NOT use the device while charging or touch the device with wet

hands.

-DO NOT immerse the device in water or any other liquid.

-DO NOT drop or cause an impact to the USB charging cable or the

battery and never crush or puncture the battery.

-Only use the USB charging cable supplied. DO NOT attempt to charge

the battery with USB charging cable that are not approved by the

manufacturer.

Electrical safety

-Disconnectthe USB charging cable when not in use.

-Always store devicewith battery fully charged.

.Never dispose batteries or device in aﬁre.

-Never place device on or in heating devices, such as microwaveovens,

stoves or radiators.Batteries may explode when overheated.

-If battery acid has leaked, avoid any contact. If contact is made, rinse

affected areas immediatelywith plenty of clean water and contact a

doctor urgently.

.The rechargeable battery is permanently built into the device and cannot be

replaced.

-DO NOT open the housing ofthe unit

-Whenthe housing is opened. there is arisk of mortal danger from

electric shock

-The USB charging cable is not rated for outdoor use. Never allow the

USB charging cable to become wet or subjected to moisture of any kind.

-Uncoil all of the cable supplied with the USB charging cable before use.

Coiled cable can overheat and cause damage.

-DO NOT use the USB charging cable on any other products or for

anything but its intended use.

.DO NOT use the USB charging cable if the supply cord is damaged.

m5115 m3

81.“? mo 269 an E[email protected]

Tdiee MODELzEC-RLC-Oi PRODUG CODEZGZZSZ 03/2019

4AFTER SALES SUPPORT

El [email protected] ‘5‘ ®1800 269 981

MODEL:E(-RL(-01 PRODUCT(ODE262282 03/2019 TOWN

All manuals and user guides at all-guides.com

Generallnformation and Safety

Instructions (Cont) General. Information and Safety

Instructions (Cont)

Battery warning:

-This product contains lithium operated batteries.

-DO NOT incinerate

-DO NOT disassemble-

-DO NOT short circuit.

-DO NOT expose to high temperature.

Hazard for children

-Keep out of reach of children.

-This is not atoy. Children should be supervised to ensure that they DO

NOT play with the unit.

Usage conditionsand restrictions

-This product is designed for domestic use. It is not suitablefor commercial

or industrial purposes. .

'Purpose: DO NOT use this product for anything other than its Intended

purpose, and only use it as described in this manual. Any other use [5 not

recommended by the appliance distributor, may cause injuries and vord

your warranty.

-Non—compliance:We accept no liability for any eventual damages caused

by improperuse or inappropriatehandling, or by any other non-compliance

with the instructions in this manual.

-This product is not intended for use by persons (including children) With

reduced physical, sensory or mental capabilities,or lack of experience

and knowledge, unless they have been given supervisionor instruction

concerning use of the appliance by aperson responsible for their safety.

-Caution: Do not look directlyat the light and do not leave the light on

when not in use.

Regulatory Information and Copyright Infringements

fCaution: To maintain compliance with the RF exposure guidelines,

place unit at least 20 cm from nearby persons.

Warning: Changes or modiﬁcationsto this unit not expresslyapproved by

the party responsible for compliance could void the users authority to

operate the equipment. Risk of explosion if battery is replaced by an

incorrecttype. Dispose of used batteries according to these instructions.

lWarning: The images recorded with this camera are intended for personal

use. Do not record images that infringeupon copyright laws without the

prior permissionof the copyright holders Please be advised that in certain

cases the copying of images from performances,exhibitionsor commercial

properties by means of acamera or other device may contravene copyright

or other legal rights even if the image was shot for personal use.

Disclaimer:The Bike Action Camera with Tail Light is designed specially to

be used as arear tail light with video and audio recording capabilitiesfor

bicycles. While every effort has been made to ensure it ﬁts with most

bicycles on the market, it may not ﬁt all bicycles depending on the set up.

The manufacturer, its subsidiariesand afﬁliates and distributors are not

liable for any consequential damages arising from any malfunctionof the

device, including memory cards.

AFTER SALES SUPPORT 5

8®1800269 981 ll [email protected]

loﬂfree MODEL:EC-RLC-Ol PRODUCl CODE:62282 03/2019

6AFTER SALES SUPPORT

l1 [email protected] ‘5‘ ®1800 269 981

MODEL:E(-RLHH PRODUCTCODE:62282 03/2019 Tallies

All manuals and user guides at all-guides.com

Product Overview Product Overview

01. Camera A. 8GB Micro SD Card x1 A

02. Indication Light 1B. USB Charging Cable x1E}

03. Camera ON /" OFF Button 1C. Mounting strap x1

04. Light ON /OFF Button r’ d) D. Aero Spacers x23% 5H

05. Speaker K

_IE. 1mm Silicone spacers x2

06. Microphone I3F. 2mm Silicone spacers x2Ba

07. Mounting Wedge 9G. 3mm Silicone spacers x2

08. Micro SD card slot mr4H. Short Straps x2\

09. Micro USB 2.0 Port @I. Long Straps x2

10. Dust cover 2{€- \

o’o

\9w

7am

10 |

AFTER SALES SUPPORT 78AFTER SALES SUPPORT

3®1300 259 931 ,El [email protected] El [email protected] ‘3‘ ®1800269981

Tolllme MODﬂzEC-RLC-m PRODUCTCODMZZXZ 03/2019 MODELzEC-RLC—Ol PRODU(TCODE:62282 03/1019 Tollfree

All manuals and user guides at all-guides.com

all-guides.com

Getting Started Getting Started (Cont)

Chargingthe Bike Camera

CAUTION:

Ensure that only the supplied Micro USB cable is used.

This device is powered by a 2600mAh lithium battery. Proper care when

charging can optimise the life of the battery. Before ﬁrst use, please make

sure the device is fully charged. This operation must be performed indoors,

in adry and well ventilated place.

It is recommended to fully charge the device when recharging.

1. Please ensure the device is turned off when charging.

2. Plug in the charging cable to the USB port with input power supply.APC

or laptop USB port is preferable:the charge time will vary depending on

the method of charging: i.e. mains power USB (not supplied) or computer

USB. Always checkthe output ofthe USB mains adaptor before charging

this device.

3. Chargethe devicefor 2.5 —4.5 hours for maximum battery charge. Please

see the indication light for the charge status.

RED light ON

RED light OFF

4. Ensure the dust cover is ﬁrmly closed before use.

Low Battery Indication

When the device beeps four times, it indicatesthe battery capacity has

reached less than 25%. Please recharge the device.

[NOTE: This device comes with aHome Safe Mode. J

When your battery is running low (25% or less) the battery capacity is

smartly managed to save power and get you home safely; the camera

recording function will be automaticallydisabled in favourfor the rear light

function. The bike light will continue to function for approximately1.5 hours.

Charging mode:

Fully charged:

Install and Remove the Micro SD Card

1. Before ﬁrst use, install the Micro SD card into the bike camera.

2. Lift up the dust cover, insert the Micro SD card to the Micro SD card slot.

3. Push the card into the slot until it clicks and locks into position then close

the cover.

4. Ensure that the dust cover is ﬁrmly closed.

5. To remove, press the card down into the slot until it clicks and releases.

Repair the Micro SD Card

In the event the Micro SD card doesn’t work or becomes corrupted, format

the card With the use ofa Micro SD adaptor (not provided) directly with a

computer. Always format the card in FAT32.

For more detailed instructions in now to complete formatting the Micro SD

card, please download ‘50 formatter' from the following link:

https://www.sdcard.org.downloadsxforrnatterj

Setting Date /Time

You can set the date and time for the video with a”UVC” file in the root

directoryof the rovided 8GB Micro SD card. Files will be transferred

automaticallywen the card is inserted.

1.0penthe Micro SD card directory.

2. Open the file "UVC”.

3. Install usin the following tips

a. Use the SB cable rowded to connect the camera USB port to computer.

b."Open the system ate time Sync, you will ﬁnd the Host Time

2018-05-01 10:00:00” and the device time ”2018—05-01 10:00:00”.

c. Click ”Sync”.

d. Save the file.

4. Turn the camera OFF and then ON again or insert the Micro SD card and

turn the camera ON.

Note: Compatiblewith: Window 05: win 7, 32 bit and above, Apple OS: 10.1

and above

AFTER SALES SUPPORT 9

B@1800 269 981 EL [email protected]

To" free MODEL:EC-RLC-ol PRODUG CODE:62232 03/2019

10 AFTER SALES SUPPORT

‘8‘ ®1800269981

MODELzEC-RLC-Ol PRODUCTCODE162282 03/2019 Tolllree

usupport@eurocentra.(om.au

All manuals and user guides at all-guides.com

Operating instructions Operating Instructions (Cont)

I;Recording Function

1. Fress and hold the on/off button (b for 1.5 seconds to turn ON the

recording function.

1When the device is turned on and starts recording,you will hear along

beep alert and the indication light will ﬂash green.

3. To turn OFF the recording function, press and hold the on/off button d)

for 1.5 seconds. You will hear two beeps and the ﬂashing green indication

light will turn OFF.

NOTE:This device comes with an Error Detection Alert.

If the Micro SD card does not insert properly into the SD card slot or is

removed while the camera is on, there will be arapid ”beep” alert which

reminds riders to stop riding, pull over to asafe position and re-insertthe

Micro SD card.

Light Function

Solid >Slow ﬂashing >Rapid ﬂashing

1. Press and hold the on /off button ii:- for 1.5 seconds to turn ON the light

for asolid light mode.

2. Press the button asecond time to switch to aslow ﬂashing mode and a

third time to arapid ﬂashing mode.

3. To turn the light OFF, press and hold the on /off button-:éz-for1.5 seconds.

Looping Function

The bike camera is designed with aset and forget function.The footage is

continuously recording onto the Micro SD card until there is no remaining

NOTE:The approximate looping record time is 1.5 —2.0 hours with the

provided 863 Micro SD card. The recorded videos are divided into 10

minute intervals. If you want to stop the looping function,you will have to

insert aMicro SD card with greater capacity: up to 32 GB. Alternatively, you

can remove the Micro SD card when the capacity is reached and replace

with anew Micro SD card.

IMPORTANT:In the case of an accident or major incident, it is important

to turn the camera OFF and/or remove the Micro SD card to ensurethat

the footage in not recorded over. To avoid the footage being recorded

over, you can use a3268 SD card (not provided) which has agreater

memory capacity.

The bike camera is produced with nanotecnuoiogy. lt enhances strength of

the device. is resistant to weathering anc protects it from the elements.

This technology modrﬁes the entire sur‘ace a'ea of the circuitry at a

molecua' ewe: warmer?) eating your bike camera in ahydrophobic

ate. '- ssac-cit: g'eatty errance 3:5 iongevity.

NOTE:The device is not waterproof. You should still take good care to

ensure the Micro SD card slot and ports are correctlyand ﬁrmly sealed so

that water ingress does not occur.

Approximate Operation Time

space. then it records over the oldest footage until there is no space left Function Operating Light with Operating Light with

and then it repeats. This looping function cannot be turned off. This is to Camera 0N Camera OFF

ensure that you do not forget to record your ride. Light turned off 5hours N/A

Flashing 3hours 20 hours

Slow ﬂashing 3hours 20 hours

Steady 2.5 hours 6hours

mmssumtr n12 AFTER SALES SUPPORT

aE1ﬂ2$ *1 El [email protected] El [email protected] '5‘ ®1800269981

Tali-"es MODELEC-RLC-Ol PRODUCTCODE162282 0mm; MODflzK-RK-Ol PRODU(T(0DE:62282 03/2019 Toll free

All manuals and user guides at all-guides.com

Coerat'ng Instructions (Conti Operating Instructions (Cont)

[ﬁl

Assembling the Bike Camera Aeroseat Seat Post Fitting

Standard Seat pole Fitting For ﬁtting the bike camera to an aero seatpost,follow the same steps as above.

ywvead the mounting wedge through the mounting strap holes. Before placing the camera, position the aero spacers in the desired location

2. SeIect the appropriate alignment spacer (if required) that aligns the on your POST-

Bike Camera perpendicular to the ground. Place the spacer between Standard Seat po|e Aero Seat po|e

the mounting wedge and the seat post.

3. Position the camera in the desired location on your seat post.

4. While holding the bike camera against the post, wrap the straps

around to fasten.

5. Ensure the strap is pulled tight, checking that the bike camera is ﬁtted

vertically and stable.

NOTE: ‘tne car-er: s"«o: I'E’Y‘Ei pierce the silicone spacer either on its

an" :r ir snowmen with the mounting wedge. Additional small and

Large straps nave been provided as spares.

Installing the camera on the front of your bike:

Installingthe camera vertically on the bike stem may cause the camera

lens to face towards the skyline and therebynot record at the desired

angle. For forward facing footage, we recommend installing the

camera horizontally on the handle bar, following the above ﬁtting

steps and so that the camera is parallel to the ground. The footagewill

be recorded on a90° angle, but this footagecan be rotated later during

video editing (see ’rotating the video’ steps on page 19).

AFTER SALES SUPPORT 13'4AFTER SALES SUPPORT

a@‘KJCZEG98‘ .E[email protected] -[email protected] 3®1800269981

'3‘ "~25 xiootL-tc-Ritm Paooucrtoomzaz 03/2019 “MW-RIC“ PRODUUCOUEIGZZH 03/2019 “"1”?

All manuals and user guides at all-guides.com

Operating Instructions (Cont) Operating instructions (Cont)

install the Data Sync Software 3- Click "Install".

.ug”3,. 2"«‘§_\\'Hlyl.l'.r

‘.Clle Start” Readytolnstall

'tb“stall' SDtS dionizeron our

u. UVC XU System Date SynchronizationSetup X$3593?”de °99mm "‘9 My" NV“ rV

Click Install to continuewith the installation, or did<Backif you wantto review or

..changeany settings.

Press button 'Start to initialize the USB UVC XU system date synchronization... _.”,iﬁﬂ

Additional tasks:

,,,,, ,, ... ,,..Addﬁondshortwts:

Create adesktopshortwt

——)

2. Click ”Create adesktop shortcut" box, then click ”Next”. 2

I‘<C“! ‘

ﬁSetup ~System Date Synchronizer —7v7 7hLJ

Select Additional Tasks 4_ Click 'Finisl'l'.

Which additional tasls shouldbe performed? ’Setup -System Date Syvrhrcrtza —

Select the additional tasks you would like Setup to pen‘orm while installing System Date Completmg’ the System Date

Synchronizer, then click Next. Synchronize:Setup Wizard

Additional shortcuts:

_. Seumhasﬁrlstiedm-vgmaaeWa‘qau‘vo-x

leate adesktop shortcut comma The acumen mbe launchedby Wme

Installed shortcuts.

dick Finish to exit Setup.

Next >Cancel

AFTER SALES SU PPOKT l5‘5AFTER SALES SUPPORT

8E73% 269 981 ,usuppon@eurocen(ra.(om.au ;[email protected] ‘3‘ ®1800 269 981

Tollftee MODELitﬁ-RLC-Ol PRODUGCODE262282 03/2019 WJDElfC-RLC-Ol PRODUGCODE162282 03/1019 Tollfree

All manuals and user guides at all-guides.com

Other manuals for EC-RLC-01

Other bikemate Action Camera manuals

bikemate

bikemate EC-RLC-01 User manual

Popular Action Camera manuals by other brands

Epic

Epic STC-EPC1T user manual

Brinno

Brinno MAC200 DN user manual

GoPro

GoPro HERO5 Important product information

ION

ION Air Pro 2 quick start guide

Firefly

Firefly 6s instruction manual

Omni

Omni HERO4 user manual

nedis

nedis ACAM41BK user manual

MOFILY

MOFILY YOCAM quick guide

ZERO-X

ZERO-X ZX-10 user manual

Pyle

Pyle eXpo PSCHD90 user manual

Action Camera

Action Camera AC32 user manual

Midland

Midland XTC300 quick start guide

Movii

Movii QC-8075 user manual

Coleman

Coleman C5WP Xtreme instruction manual

MCM Electronics

MCM Electronics 82-19749 user manual

Aim

Aim SmartyCam 3 Sport user manual

Naxa

Naxa NDC-409 user manual

Panasonic

Panasonic HX-A1M operating instructions