BFM Europe Celena Mounting instructions

Celena

CONVENTIONA F UE OG EFFECT GAS FIRE

Installation, Maintenance & User Instructions

Hand these instructions to the user

Model No. BPR **RN is only for use on Natural Gas (G20) at a supply

pressure of 20 mbar in G.B. / I.E.

** denotes cosmetic variant

CONTENTS

Section 1 Information and Requirements PAGE

1.0 Appliance Information 3

1.1 Conditions of Installation 4

1.2 Flue and chimney suitability 4

1.3 Fireplace / surround suitability 5

1.4 Shelf position 5

1.5 Chimney inspection 5

1.6 Fire place opening / catchment space 6-7

1.7 Chair bricks 8

1.8 Metal flue boxes 8

1.9 Spillage monitoring system 9

Section 2 Installation of Fire

2.1 Unpacking the fire 10

2.2 Installing the fire box 10-18

2.3 Gas tightness and inlet pressure 19

2.4 Installing the Rennes surround 20-21

2.5 Installing the Avignon surround 22-23

2.6 Installing the Etienne surround 24-25

2.7 Checking mechanical fixing of all surround types 26

Section 3 Assembling Fuel Bed and Commissioning

3.1 Fitting the log fuelbed 27-31

3.2 Fitting the batteries 32

3.3 Operation of the fire 33-37

3.4 Lighting the fire 37-40

3.5 Advanced settings of remote control 40-44

3.6 Checking for clearance of combustion products 45

3.7 Removal / re-fitting the restrictor baffle 46

3.8 Fitting the optional trim assembly 46

Section 4 Maintenance

4.1 Removal of the burner assembly 47

4.2 Removal of the control valve 47-48

4.3 Removal of the oxypilot 48

4.4 Replacing the battery in the handset 49

4.5 Replacing the batteries in the fire 49

4.6 Access and checking the flue debris void 49

4.7 Spare parts shortlist 50

Section 5 User Instructions Section

5.1 Conditions of installation 51

5.2 About your new fire 52

5.3 Operating the fire 53-56

5.4 Changing the batteries in handset and in the fire 57

5.5 Setting the time, date and temperature on the remote handset 58-61

5.6 Advanced settings of the remote control 62-65

5.7 Cleaning instruction 66

5.6 Removal / re-fitting the glass panel 67

5.7 Removal / replacement of the fuelbed 68-72

5.8 User replaceable parts 73

This appliance is manufactured by :- BFM Europe Ltd, Trentham Lakes, Stoke-on-Trent, ST4 4T .

SECTION 1

INFORMATION AND REQUIREMENTS

1.0 APP IANCE INFORMATION

Model BPRL**RN

Gas Type G20

Main injector (1 off) Cat 82 size 360

Pilot Type ERTA-PG-82-330

Max. Gross Heat Input : 5.4kW

Min. Gross Heat Input : 3.7kW

Cold Pressure : 20.0 +/-1.0 mbar

Ignition : Via remote, integral to control system

Electrode Spark Gap 4.0mm

Packed Weight 35kg

Gas Connection : 8mm Compression (supplied with fire)

Appliance Efficiency Declaration

The efficiency of this appliance has been measured as specified in BS 7977-1 : 2009 +A1 : 2013

and the result is 79.6%. The net calorific value of the fuel has been used for this efficiency

calculation.

The test data from which it has been calculated has been certified by BSI. The efficiency value

may be used in the UK Government’s Standard Assessment Procedure (SAP) for energy rating of

dwellings.

Fig. 1

INSTA ATION REQUIREMENTS

1.1 CONDITIONS OF INSTA ATION

It is the law that all gas appliances are installed only by a GAS SAFE Registered

Installer, in accordance with these installation instructions and the Gas Safety

(Installation and Use) Regulations 1998 as amended. Failure to install appliances

correctly could lead to prosecution. It is in your own interest and that of safety to

comply with the law.

The installation must also be in accordance with all relevant parts of the Local and

National Building Regulations where appropriate, the Building Regulations

(Scotland Consolidation) issued by the Scottish Development Department, and all

applicable requirements of the following British Standard Code of Practice.

1. B.S. 5871 Part 2 Installation of Inset Fuel Effect Gas Fires

2. B.S. 6891 Installation of Gas Pipework

3. B.S. 5440 Parts 1 & 2 Installation of Flues and Ventilation

4. B.S. 1251 Open fire place components

5. B.S. 715 Metal flue pipes for gas appliances

6. B.S. 6461 Part 1 Installation of Chimneys and flues

7. B.S. E.N. 1858 Chinmeys Components & Concrete Flue Blocks

8. I.S. 813 : 1996 Domestic Gas Installation (Republic of Ireland)

No purpose made additional ventilation is normally required for this

appliance, when installed in G.B. When Installing in I.E. please consult

document I.S. 813 : 1996 Domestic Gas Installation, which is issued by the

National Standards Authority of Ireland. If installing in Northern Ireland,

please consult local building regulations. Any purpose made ventilation

must be checked periodically to ensure that it is free from obstruction.

1.2 F UE AND CHIMNEY SUITABI ITY

This appliance is designed for use with conventional brick built or lined chimneys

and fabricated flues conforming to BS 715. All flues must conform to the following

minimum dimensions.

Minimum diameter of circular flues 125 mm (without flue

restrictor fitted)

Minimum effective height of all flue types 3 metres

When fitting to conventional chimneys or 175mm flues it may be desirable to

leave the flue restrictor baffle (supplied) in place to reduce the flue flow and

increase the efficiency of the fire. Safe clearance of products must always

be checked by carrying out a smoke match test as described.

1.3 FIREP ACE / SURROUND SUITABI ITY

The fire must must not be installed directly onto carpet or other combustible

floor materials.

If a heating appliance is fitted directly against a wall combustible material must be

removed from behind it. Soft wall coverings such as blown vinyl, wall paper etc.

could be affected by the rising hot air and scorching and/or discoloration may

result. Due consideration should be made to this when installing or decorating.

1.4 SHE F POSITION

The fire may be fitted below a combustible shelf providing there is a minimum

distance of 200mm above the top of the fire and the shelf does not project more

than 150mm. If the shelf overhangs more than 150mm the distance between the

fire and the shelf must be increased by 15mm for every 25mm of additional

overhang over 150mm.

1.5 F UE / CHIMNEY INSPECTION

Before commencing installation, a flue or chimney should be inspected to ensure

that all the following conditions are satisfied.

1. Check that the chimney / flue only serves one fire place and is clear of any

obstruction. Any dampers or register plates must be removed or locked in

the open position.

2. Brick/stone built chimneys or any chimney or flue which has been used for

an appliance burning fuel other than gas must be thoroughly swept. The

base of the chimney / flue must also be thoroughly cleared of debris etc.

3. Any under-floor air supply to the fire place must be completely sealed off.

4. Ensure that the inside of the chimney / flue is in good condition along it’s

length and check that there is no leakage of smoke through the structure

of the chimney during and after the smoke pellet test.

5. Using a smoke pellet, check that there is an up-draught in the

chimney / flue and that the smoke can be seen issuing from the

terminal / chimney pot outside.

There must be no leakage of smoke through the structure of

the chimney during or after the smoke pellet test and it is

important to check inside upstairs rooms adjacent to the chimney /

flue. Check the chimney pot / terminal and general condition of the

brickwork or masonry. If the chimney or flue is in poor condition or if

there is no up-draught do not proceed with the installation. If there is a

history of down-draught conditions with the chimney / flue, a tested and

certificated flue terminal or cowl suitable for the relevant flue type should

be considered.

6. A spillage test must always be carried out during commissioning of

the appliance.

1.6 FIRE P ACE OPENING

1.6.1 Fireplace Opening for Engine Only Applications

The front opening of the fire place must be between 580mm and 600mm wide,

between 580mm and 600mm high and 300mm deep. If the opening exceeds

these dimensions then a surround must be constructed from suitable non-

combustible material to produce a correct size opening. Any surround must be

suitably sealed to the fire place to prevent leakage. See below in figure 2.

NOTE :- If installing with a retailer designed surround package please consult

the retailer to determine installation height required for the fire.

When installing into a brick built chimney, you must ensure that there is sufficient

depth to accomodate any debris which may fall from the chimney. This depth

must be sufficient to accomodate 12 litres of volumetric space in a conventional

brick built chimney.

Minimum 225mm from

grill on fire to base of

opening required to

comply with AD of

Building Regulations for

hole in the wall type

installations

Fig. 2

137mm base

of box to floor

level minimum to

attain 225mm as

required

Opening height

580mm to

600mm

Opening width

580mm to

600mm

1.6.2 Fireplace Opening for Rennes, Avignon & Etienne Surround Types

If fitting this fire with a surround supplied from “BFM Europe” then the

fireplace opening of width / height of 580mm minimum to 600mm maximum

needs to be prepared at differing heights dependent upon which surround

type is to be installed. See figure 3 below for individual heights required by

surround type. There are mounting platforms available as optional extra’s from the

manufacturer to assist with installation, for Rennes & Avignon surrounds please

request part no. 1176-182550 and for the Etienne surround please request part no.

1176-182540.

Fig. 3

Rennes Surround

Opening to be 117mm

from floor level to base

of opening

Use mounting platform

Part No. 1176-182550

Avignon Surround

Opening to be 107mm

from floor level to base

of opening

Use mounting platform

Part No. 1176-182550

Etienne Surround

Opening to be 67mm

from floor level to base

of opening

Use mounting platform

Part No. 1176-182540

Table A - Installati n Depth Requirements f r BFM Fires Celena being

installed int  a brick built chimney, requiring 12.0 litres f debris c llecti n

v lume (figure 4).

Opening Width (mm) Minimum Depth Required (mm)

580-600mm 300mm

Fig. 4

1.7 FITTING TO FIREP ACES WITH EXISTING CHAIRBRICKS AND

CONVENTIONA BRICKBUI T CHIMNEYS

This appliance is not suitable for use in fireplaces fitted with an existing chairbrick

without the removal of the chairbrick.

1.8 FITTING TO PRE-FABRICATED TWIN WA META F UE BOXES

The appliance may be fitted to twin wall metal flue boxes conforming to the

constructional requirements of BS 715. The top face of the box must be insulated

with a minimum thickness of 50mm of non-combustible mineral wool insulation or

similar material. The flue box must stand on a non-combustible base of minimum

thickness 12mm. A suitable box is available from the manufacturer, please quote

part number 1176-180120.

Opening Width (580-600mm)

Depth Required

(300mm)

1.9 SPI AGE MONITORING SYSTEM

This appliance is fitted with an atmosphere sensing spillage monitoring system in

the form of an oxygen sensing burner. This is designed to shut the fire off in the

event of a partial or complete blockage of the flue causing a build up of combus-

tion products in the room in which the fire is operated. The following are

important warnings relating to this spillage monitoring system :-

1.9.1 The spillage monitoring system must not be adjusted by the installer.

1.9.2 The spillage monitoring system must not be put out of operation.

1.9.3 When the spillage monitoring system is exchanged only a complete

original manufacturers part may be fitted.

SECTION 2

INSTA ATION OF FIRE

2.1 UNPACKING THE FIRE

Carefully lift the fire out of the carton. Remove the loose item packaging, check

the contents as listed below :-

NOTE : DO NOT UNDER ANY CIRCUMSTANCES USE THIS APP IANCE IF THE G ASS PANE IS

BROKEN OR NOT SECURE Y FIXED TO THE FIREBOX.

Packing Check List - All Models

Pack 1 - Fire Pack

1 off Combustion chamber / burner

1 off Boxed ceramic fuel-bed set (packed inside combustion chamber)

1 off Loose items pack – containing :- 1 off fixing kit

1 off handset

5 off AA batteries

1 off Installation / user manual

Pack 2 - Optional Trim (If selected)

1 off 4 sided trim assembly (magnets supplied fitted on mounting flange of

fire)

Pack 3 - Surround (If selected)

1 off Supplied in wooden crate, see section 2.4, 2.5 & 2.6

2.2 INSTA ING THE FIRE BOX

Establish which type of flue you are intending to install the fire in to :-

225 x 225mm (9 inch x 9 inch) brick built chimneys

175mm (7 inch) diameter lined brick or stone flue, or insulated pre-fabricated

metal flue box to B.S. 715.

When installing into 125mm (5 inch) diameter lined brick or stone flue, or

insulated pre-fabricated metal flue box to B.S. 715, the restrictor baffle must

not be fitted.

A spillage test must always be carried out to check satisfactory

clearance of flue products, regardless of the type of flue the

appliance is being fitted to.

Table of contents

Other BFM Europe Indoor Fireplace manuals

BFM Europe

BFM Europe The Collection Da Vinci Illumia Mounting instructions

BFM Europe

BFM Europe Eden Elite Mounting instructions

BFM Europe

BFM Europe Arana RC User manual

BFM Europe

BFM Europe Avelli Mounting instructions

BFM Europe

BFM Europe Passion Series Mounting instructions

BFM Europe

BFM Europe GICCI2MN Mounting instructions

BFM Europe

BFM Europe Da Vinci Illumia MK2 Mounting instructions

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual