Bewello BW2024 User manual

Electric Wall Fireplace

Heater + LED

Elektrischer Wandkamin

Heizlüfter + LED

Elektromos fali kandalló

Hősugárzó + LED

Elektrický nástěnný krb

Ohřívač + LED

Elektrický nástenný krb

Ohrievač + LED

Şemineu electric de perete

cu radiator de căldură + LED

USER MANUAL

HUEN ROSKCZDE

Product Nr. BW2024

IP20

EF-14A

Electric Wall Fireplace - Heater + LED

Dear Customer! Thank you for choosing our product, we hope you enjoy using it for a long time.

There is nothing better than to cuddle with our loved one in front of the fireplace on a cold winter day. This multifunctional

recessed fireplace is the perfect replica of the original fireplaces: it contains realistic, flaming effects and glowing, smoldering

pieces of wood, but it can also be used as a radiator. A romantic atmosphere is guaranteed. On cold winter nights, you can adjust

the intensity of the radiator (950 W, 2000 W) at two power levels on request, which is suitable for occasional, intermittent

heating of a room of up to 30 m².This way, not only the sight but also the feeling of warmth will be realistic. Precise temperature

control is ensured by a built-in thermostat, which can be set using the accessory’s remote control. The flame effect can be used

independently of the heating function, so you can admire the magical atmosphere of a„burning fire”in the fireplace at any time

of the year. The accessory crystals give an even more exclusive look to the „combustion chamber” of the fireplace.

• It can be operated safely • Rugged frame

•There is no re, spark, soot • Recessed design

• It is characterized by two heating capacities and

high heating power

•The light eect can be switched separately,

adjustable brightness

•Weekly timing • Romantic atmosphere from the rst minute of switching on

• Overheating protection • It is deceptively similar to real replaces

Attention! Some points on the cover may overheat due to heat radiation!

Design: Recessed Inbuilt temperature adjustment: Yes, manual

Power supply: AC 220 - 240V, ~ 50/60 Hz Protection: IP20

LED eciency: 1.6W Overheating protection: Yes

Heating eciency: 950 - 2000W Noise level: 50 dB

Recommended use: max. 30 m² helyiségben Power cord: 140 cm

Operationg temperature: 15 °C - 30 °C Material: Metal + glass

Storing temperature: 15 °C - 30 °C Size: 88 x 56 x 15 cm

Direct heat eciency: 950 - 2000W Color: Black

Energy class (EU2021): Class„G”

USER MANUAL

Safety regulations, warnings

DANGER!

General advice: Danger of suocation! Please keep the packaging of the appliance out of the reach of children as it may lead to

suocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot

accidentally access it. Children should be supervised to ensure that they do not play with the appliance.

Danger of electric shock: Never operate the appliance with wet, wet hands!Touching the device, including the power plug and cable,

with wet hands is strictly prohibited! The device may only be connected to AC power with the correct voltage. Do not point the device

directly at electrical equipment, as hot air may enter and cause damage. Do not use the appliance near a bathtub, shower, swimming

pool or sink containing water. Unplug the appliance only by grabbing the mains plug.

Operation: Make sure of environmental regulations before use! Do not use the device near explosive material! When used in special

places (eg petrol station, pools…) the local safety regulations must be followed! Place the appliance horizontally and stably, make sure

that the appliance does not tilt or tip over! Do not cover the appliance with anything (sheets, blankets…)! To reduce the risk of re, do

not place the appliance closer than 2 m to furniture, objects or walls! The appliance must not be operated from a socket with a timer!

The appliance is not suitable as a primary heating source for rooms.The appliance is designed for intermittent (short-term) heating.

WARNING

General advice: The device may only be used for its intended purpose!When using, pay attention to the physical safety and safety of

those around you (especially children).The device may only be used by persons who have read, understood and are able to operate this

device accordingly! Persons with reduced mental, physical or sensory capabilities should not use the device! Children should not use the

appliance! After using the appliance, make sure that the hot appliance can cool down in a well-ventilated place in a way they won’t cause

personal injury to anyone! Inform those around you about the operating status of the device.

Risk of electric shock: Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in

accordance with IEC 60364-1. Before each use, make sure that the appliance and the mains cable and connectors are intact! Only use

undamaged devices! If you experience any damage, do not use the appliance, contact a specialist! During use, pay attention to the

integrity of the mains cable, avoid edges or objects that can damage the surface of the cable. Avoid the use of extension cords or splitters,

as they are a source of danger during operation. Always unplug the appliance when not in use! Maintenance work must only be carried

out with the mains plug removed!

Operation: Risk of burns! Never touch the part of the radiator (bottom) or point it at close range to other people or animals! To

avoid burns, always allow the appliance to cool down before you touch it!The device may only be operated when fully assembled with

the factory accessoriesIf any part is damaged, it must be replaced before use. Allow the appliance to cool down completely in a well-

ventilated place before storing it. During use, periodically check that the appliance is not overheated and that the ventilation openings

are not blocked.

CAUTION

General advice: Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is strictly forbidden to,

modify or disable safety devices, you must use as intended!

Operation: Always operate and store the device as described always check the integrity of the appliance, cable, plug and accessories In

the event of damage, do not use the device!

ATTENTION

Operation: Use the appliance only at freezing temperatures above 0 °C to avoid condensation and electric shock. Never leave the

appliance unattended when it is connected to the mains! Protect the device from moisture and water! Do not store the device outdoors

in high temperature uctuations.

ATTENTION!

Certain parts of the product may become hot and cause burns. Requires increased attention near children.

ATTENTION!

The device may only be installed in recessed form in a plasterboard wall or in a wooden wall or box specially

designed for this purpose. Ensure that the device is properly ventilated during installation. Internal circuits and

components are cooled through the ventilation openings at the top and bottom of the replace.

To ventilate them, an air space of appropriate size must be provided, this part must not be insulated or covered.

ATTENTION!

You should only deviate from this if you choose to place the device outside the wall. In this case, it is also possible to

x it on brick, concrete, silicate and other walls.

ATTENTION!

The device may only be installed by a specialist!Two people are required for a safe installation!

ATTENTION!

The radiator does not include a device to control the temperature of the rooms. Do not use it unattended in a room with people who

cannot leave.

ATTENTION!

Leave at least 100 cm free space above the radiator and 200 cm in front of the radiator. Never use the radiator in a room with ammable,

explosive oil, gasoline or gas.

INSTALLATION INSTRUCTIONS:

During installation, the location of the appliance must be located in such a way that it does not come into contact with moisture or heat

pipes, gas pipes or electrical cables in its immediate vicinity. Install the appliance at least 30 cm high on the wall, so that the distance

between the ceiling and the appliance is at least 100 cm.We recommend placing the lower part of the appliance at a height of 60 cm

from the ground to ensure the best visual experience in the replace ag re.

RECCESSED INSTALLATION:

The included mounting accessories allow ush mounting on drywall and wood. Prior to installation, make sure that the wall

section has the correct load capacity and can provide the power supply for the device in the given location. When xing to a

wooden surface, it is not necessary to pre-drill the holes and use anchors for the screws!

85 cm

48 cm

1. Select the wall where you want to place the appliance, then cut a

hole of the right size for the appliance as shown! Use a spirit level

and a pencil to mark the hole. Saw with the right blade for cutting,

depending on the material.

2. Remove the glass front of the device. Remove

the screws onboth sidesof the device.You will nd

these screws in the middle of the housing, screw

number 4 down from the top of the housing.

Attention! The front of the device is made

of glass! Handle with care! Shattered

glass can cause cutting injuries! Place the

glass on a clean, soft surface.

3. Insert the device into the previously cut hole

and mark the location of the 4 xing points.

Remove the device. When xing to drywall,

drill the holes and insert the drywall anchors

into the holes.

4. Insert the replace into the prepared hole and secure it with the 4 screws. Be careful not to break the cord of the machine, do not

break the cord, or touch a sharp surface. Do not allow the cable to come in contact with the housing, as it may become hot during use.

5. Place the wood decoration or, if required, the supplied“crystals”in the combustion chamber and arrange them according to your taste.

6. Ask for help to replace the front panel. Use the xing screws on both sides of the appliance to x the front panel back to the replace

housing (at the plane of the wall, you can do this from the side).

7. Make sure the device is turned o. Connect the mains plug of the appliance to the mains socket. The device beeps to indicate that it

is ready for operation.

OUT OF WALL INSTALLATION NOT RECESSED:

1. Use a drill to drill the holes for mounting

the bracket. Use an 8 mm drill bit for drilling.

The depth of the holes must be at least 26 mm

deep. Do not use a smaller mounting size!

2. Insert the included anchors into the holes

until they line up with the plane of the wall.

3. Using a screwdriver, screw in the screws so that

theirheadsare3-4 mm fromtheplane of the wall.

4. Hook the replace on the screws and make

sure it ts snugly and accurately. If necessary,

adjust the position of the screws to secure the

replace to the wall.

5. Remove the front glass panel. Remove the

screws on both sides of the device. You will nd

these screws in the middle of the housing, screw

number 4 down from the top of the housing.

Attention! The front of the device is made

of glass! Handle with care! Shattered

glass can cause cutting injuries! Place the

glass on a clean, soft surface.

6. Be careful not to break the device cable, or

touch a sharp surface. Do not allow the cable to

come into contact with the housing, as it may

overheat during use.

7. Place the wood decoration or, if required, the supplied“crystals”in the combustion chamber and arrange them according to your taste.

8. Ask for help to replace the glass faceplate. Use the xing screws on each side of the device to reattach the front panel.

9. Make sure the device is turned o. Connect the mains plug of the appliance to the mains socket. The device beeps to indicate that it

is ready for operation.

HOW TO USE THE DEVICE:

There are two ways to control the replace:

1. By using the touch screen ont he panel

2. By using the remote

The icons on the replace touch screen and the remote serve the same functions.

When controlling the replace, please note that it takes a few seconds for the control unit to receive the given instruction and process it.

On/o switch: Press the button on the touch panel or remote control and you will hear a short signal, the electric replace will

turn on, the power icon will turn blue and the other buttons will light white, the display will show the room temperature.

Device shutdown: Press the POWER button on the touch panel or remote control and you will hear a short signal, the light will

go out and the replace, including the heating, will turn o. The POWER indicator will light up in red on both the unit and the remote

control,the fan inside the unit will operatefor another 10secondsafterthe poweris turned o,then the replacewill enterstandby mode.

High and low temperature adjustment:

Press and hold the„HEATER”button on the replace control panel for 3 seconds, then switch the device between 0C and 0F. (note:

This function is not available on the remote control.) Start temperature 22 0C (72 0F), if the room temperature is lower then the device

starts in high heating mode, if you want to switch to low heating mode, press the HEAT button to switch (after the rst press the

display shows the current mode, after pressing it again it switches to the desired mode, if you press the button again, it switches o

the heating mode. (H / L / O = high / low / o heating). You will hear a signal after each change, if you want to deactivate the heating

function, you can also reduce the temperature with the„DOWN”button.

Time adjustment:

You can set the timer from 0 to 12 hours. After switching on, the timer is set to 0 hours,You can set the timer using the touch panel on

the unit or theTIME button on the remote control, Once the replace is activated and you press theTIME button ,“00”will ash on

the display, then the number of times you press theTIME button it will change.

(00-30-1H-2H-3H-4H-5H-6H-7H-8H-9H-10H-11H-12H).

When you have reached the time you want to schedule, do not press the button again.

After the display ashes for 10 seconds and there is no status change, the display will show the room temperature again.

Temperature increasing buttons:

Temperature change range from 15 0C (60 0F) to 36 0C (97 0F), (default temperature 22 0C / 72 0F), press the up button and after each

press the temperature will rise by 1 0C / 1 0F. After a long press, the temperature will rise continuously.( Note This function does not work

with the remote control.)When in temperature setting mode, the temperature part will ash on the display. If no button is pressed for

10 seconds, the display will reset.

Temperature adjustment:

Temperature change range from 15 0C (60 0F) to 36 0C (97 0F), (default temperature 22 0C / 72 0F), press the up button and after each

press the temperature will decrease by 1 0C / 1 0F. After a long press, the temperature will decrease continuously. (NoteThis function does

not work with the remote control.) When in temperature setting mode, the temperature part will ash on the display. If no button is

pressed for 10 seconds, the display will reset.

DIMMER function:

The ame brightness is at maximum by default. Flame brightness has 5 levels. If you press the DIMMER button , the brightness will

decrease and after each press the brightness will decrease if the display shows -1, you have reached the darkest mode, if you press the

DIMMER button again, it will reset (brightest mode)

Flame color changing:

By default, the ame is orange when you press the COLOR MODE button on the remote control, the display temperature display

changes to a color display:

(C1, C2, C3, C4, C5 , C6 , C7, C8, C9)

Each time you press a button, it will change color:

(C1) orange, (C2) green, (C3) blue, (C4) white, (C5) green + orange, (C6) orange + blue, (C7) orange + white, (C8) green + blue,

(C9) green + white

Child safety function:

The electric replace has a locking function that you can both activate using the remote and the panel, after use, press the “up” and

“down”buttons simultaneously for 3 seconds or press and hold the child lock button on the remote control. You will then hear a

sound indicating that the replace is closed,The buttons do not work. If you want to control the appliance again, press and hold the„up”

and„down”buttons for 3 seconds or the child lock button on the remote control for 1 second, you will hear a signal and the child lock

will be released.

Time set hour: Press the button once to set the hour unit (setting range 00-23)

Time set minute: Press the button once to add one minute (setting range 00-59)

To set the days of the week: Press the button, each time you press the day icon, it jumps from left to right and ashes.

Weekly timer function: The electric replace has a weekly on / o timer function. button.

Weekly timer settings, on and o timer activation. button. (Please do not schedule the replace at a time when you

cannot monitor its operation!)

CONTROL BY REMOTE:

Remove the foil from the battery compartment of the remote control, and the remote control will be

ready for use.

RELEASE

PULL

OPEN

PUSH

CR2025

RELEASE

CR2025

Use the same buttons you found on the replace control.The control of the remote control works with infrared technology, so point the

remote towards the replace you want to use it properly. The infrared signal works from a maximum distance of 4-5 meters, make sure

that no objects or people get between you and the replace during the control.

Temperature correction:

If you nd that the temperature measurement of the device is inaccurate, you have the opportunity to ne-tune and calibrate it. To

do this, press the button marked for 3 seconds. The display is now ashing. The display will show 0, which you can change

by pressing the + and - buttons. This allows you to increase or decrease the measured temperature by the set °C value. Fine tuning is

possible in the range of -9 to +9 degrees.

Overheating protection:

If the device overheats for some reason, it will turn o automatically. Remove any objects that caused overheating. To safely restart the

replace, turn o the power for 15 minutes. Once the appliance has cooled down, it will switch on again.

Cleaning:

Always switch o, unplug and let the appliance cool down before cleaning. Use a dry cloth or vacuum cleaner to remove dust. The

housing should only be wiped with a slightly damp cloth, making sure that no moisture enters the device! Do not use chemicals or

alcohol during cleaning!

Storage:

Store in a cool, dry place. Do not throw away the product box. You can use it to store the device when not in use. Caution Only put the

appliance back in its box if it has cooled down properly.

MALFUNCTIONS:

Problem Reason Solution

The replace switches o and won’t

turn on

The replace is overheated and the safety unit

is turned o or the circuit breaker is open. Loose

cables, wires, poor connection.

Unplug the power cord, wait 5

minutes, and then plug it in again.

Check the wiring connections

The ame isn’t moving The ame engine is broken Contact an expert who can replace the

replace motor

The ame won’t show up The ame unit is out of it’s place Flame rod is not in place, may have

moved during transport.This problem

can be solved by removing the glass

panel and then turning it upside down

to remove some screws that hold the

ame rod in place and then move it

into place.

If in doubt, seek expert advice.

The rewood isn’t glowing Embers are o Turn the ame button to the high

position

The remote doesn’t work Low battery Replace the battery

Remote isn’t pointed at the device Point the remote control at the

appliance, more precisely at the

center of the glass panel towards the

rewood.

The remote control and / or sensor are damaged Replace the remote control and / or

sensor

Proper disposal of the appliance (Electrical appliance):

(Valid in the European Union and all other European countries participating in selective collection) According to Directive 2012/19 / EU,

electrical waste and appliances must not be disposed of with household waste. Old appliances should be placed in a bin to maximize the

recyclingofrawmaterials,thus reducingtheir impact on human health and theenvironment.Thecrossed-out wheeled-binsymbol must

appear on all products for which separate collection is required. Consumers should contact their local authorities for more information.

Elektrischer eingebauter Kamin - Heizlüfter

Sehr geehrter Kunde, vielenDank, dassSie unserProdukt ausgewählthaben, wirhoen, unserProdukt kommt Ihnenlange zugute.

Es gibt nichts Schöneres, als an einem kalten Wintertag vor dem Kamin zu sitzen. Der multifunktionelle, eingebaute Kamin ist eine perfekte

NachbildungdesursprünglichenKamins:EsgibtwirklichkeitsgetreueFlammeneekteundglühendeHolzstücke;es kannjedochauchalsHeizung

verwendet werden. Eine romantische Atmosphäre ist garantiert. In kalten Winternächten können Sie die Intensität des Heizkörpers (950 W,

2000W) bei Bedarf auf zwei Leistungsstufen einstellen, die für die gelegentliche, periodische Beheizung eines Raums von bis zu 30 m² geeignet

sind. Auf dieseWeise wird nicht nur der Flameneekt, sondern auch das Wärmegefühl wirklichkeitsgetreu. Die genaueTemperaturregelung wird

durch einen eingebauten Thermostat gewährleistet, der über der mitgelieferten Fernbedienung eingestellt werden kann. Der Flammeneekt

kann unabhängig von der Heizfunktion verwendet werden, sodass Sie zu jeder Zeit im Jahr die magische Atmosphäre eines„brennenden Feuers”

im Kamin bewundern können. Die Zubehörkristalle verleihen dem Brennraum des Kamins ein exklusiveres Design.