Beuchat Mundial 2 User manual

User Manual

NOTICES...............................................................................................2

INITIAL ACTIVATION............................................................................3

FULL LCD .............................................................................................3

GENERAL FEATURES & DISPLAYS...................................................5

INTERACTIVE CONTROL CONSOLE .............................................6

OPERATING MODE STRUCTURE ..................................................6

OPERATION AS A DIVING GAUGE................................................. 6

PC INTERFACE ................................................................................6

ALPHA NUMERIC MESSAGES .......................................................6

AUDIBLE ALARM............................................................................. 6

BACKLIGHT .....................................................................................7

POWER SUPPLY..............................................................................7

WATCH MODE FEATURES & DISPLAYS ...........................................8

LOCAL DEFAULT TIME ...................................................................9

MAIN TIME........................................................................................9

SET DATE/TIME ...............................................................................9

ALT (ALTERNATE) TIME................................................................10

SET TIME DIFFERENTIAL.............................................................10

WATCH CDT (COUNTDOWN TIMER) ........................................... 11

SET WATCH CDT ........................................................................... 11

CHRONOGRAPH............................................................................ 11

WATCH DAILY ALARM .................................................................. 12

SET DAILY ALARM ........................................................................ 12

SURFACE MODE FEATURES & DISPLAYS .....................................13

ALPHA / NUMERIC DISPLAYS......................................................14

Time and Date..............................................................................14

Depth ............................................................................................14

Temperature.................................................................................14

Altitude .........................................................................................14

SURFACE MODE ...........................................................................15

SURF MAIN.....................................................................................15

SURF ALT 1 (CDT STATUS) ..........................................................15

SET FREE CDT ..............................................................................16

SURF ALT 2 ....................................................................................16

LOG.................................................................................................16

HISTORY.........................................................................................17

NOTICES

LIMITED TWO YEAR WARRANTY

This User Manual is copyrighted, all rights are reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to

any electronic medium or machine readable form without prior consent in writing from Beuchat/2002 Design.

Mundial 2 User Manual, Doc. No. 12-5290

San Leandro, CA USA 94577

TRADEMARK, TRADE NAME, AND SERVICE MARK NOTICE

Beuchat, the Beuchat logotype, Mundial 2, the Mundial 2 logo, and BCI (Beuchat Computer Interface) are all registered and unregistered trademarks, trade

names, and service marks of Beuchat. All rights are reserved.

PATENT NOTICE

U.S. Patents have been issued, or applied for, to protect the following design features: Data Sensing and Processing Device (U.S. Patent no. 4,882,678).

SURFACE SET MODES .....................................................................18

SET A GROUP (ALARMS) .............................................................18

Set Audible Alarm ....................................................................... 18

Set SRT (Surface Recovery Time) Alarm.................................. 18

Set EDT (Elapsed Dive Time) Alarm..........................................18

Set RDI (Repeating Depth Interval)) Alarm ...............................19

Set DD (Descending Depth) Alarms 1, 2, 3 ...............................19

SET U GROUP (UTILITIES) ...........................................................19

Set Water Type ............................................................................20

Set DSD (Dive Start Depth) ........................................................20

Set Units ......................................................................................20

Set Backlight Duration ...............................................................20

Set BDSI (Between Dive Surface Interval)................................ 20

SERIAL NUMBER...........................................................................20

DIVE MODE ........................................................................................21

DIVE MAIN......................................................................................22

DIVE ALT 1 (CDT STATUS)............................................................22

DIVE ALT 2 .....................................................................................22

ALARMS .........................................................................................22

REFERENCE ......................................................................................23

UPLOADING SETTINGS AND DOWNLOADING DATA................24

PC Compatibility Requirements ................................................24

CARE AND CLEANING..................................................................25

INSPECTIONS AND SERVICE.......................................................25

BATTERY REPLACEMENT............................................................25

ALTITUDE SENSING AND ADJUSTMENT....................................26

SPECIFICATIONS...........................................................................27

GLOSSARY ....................................................................................28

INSPECTION / SERVICE RECORD ............................................... 29

CONTENTS

User Manual

INITIAL ACTIVATION

Beuchat Watch type dive gauges are placed in a Deep Sleep mode prior to being shipped from the factory. The intent is to extend

storage life of the Battery for up to 7 years, before the unit is initially placed in service.

In this mode, Date and Time are updated as they normally would be. However, they are not displayed. Upon waking the Mundial 2

up, the correct Date and USA Paciﬁc Time will be displayed and it will be ready to operate with full functions.

To wake the Mundial 2 up from Deep Sleep mode, simultaneously depress the upper/right (S) and lower/left (A) buttons for 2 seconds

until the display comes full ON displaying the MAIN TIME screen, then release them.

Once the Mundial 2 is brought out of the Deep Sleep mode, it can only be placed back in it by the factory.

FULL LCD

Components:

a. Mode (M) Button

b. Select (S) Button

c. Light (L) Button

d. Advance (A) Button

e. Icon - Low Battery

f. Icon - Time Am/Pmgh.

g. Icon - Log Modh

h. Icon - Surface Interval Time

i. Icon - Degrees (Temp)

j. Icon - Elapsed Dive Time

k. Icon - Daily Alarm set

l. Icon - Depth/Max Depth

User Manual

Welcome

Beuchat

and

THANK YOU

for choosing the

Mundial 2

User Manual

GENERAL

FEATURES & DISPLAYS

User Manual

INTERACTIVE CONTROL CONSOLE

The Interactive Control Console consists of four Control Buttons that allow you to select mode options and access speciﬁc information. They are also

used to enter Settings, operate the Backlight, and access additional screens of information.

Throughout this manual they will be referred to as the M, S, L, and A buttons.

• Upper/Left-Mode(M)button

• Upper/Right-Select(S)button

• Lower/Right-Light(L)button

• Lower/Left-Advance(A)button

OPERATING MODE STRUCTURE

Unless it is operating in Free Dive mode, the Mundial 2 will be On in the default Watch Main Time (home time) mode (Fig. 1), like a standard Watch,

until the mode is changed.

The M button is used to access 4 other modes that include Alternate Time, Countdown Timer, Chronograph (stop watch/run timer), and Daily Alarm. It

is also used to revert to the Local Default Time display and access Free Surface Mode.

The screens of the Main Modes and Sub Modes will remain on display until a button is pressed to access another screen or mode, activate a se-

quence, or for 2 minutes if no button is pressed. The Chronograph remains on display unless turned Off or another mode is accessed.

When operating in Free Mode, the Mundial 2 will enter Dive Mode upon descent to the DSD (Dive Start Depth) previously set which can be 2, 4, or 6

FT (feet) or 0.6, 1.2, or 1.8 M (meters) for 1 second.

See page 19 for Set DSD.

WARNING: The Mundial 2 must be in Free Surface Mode in order for it to activate Dive Mode. Commencing a dive while

in Watch modes will not activate Dive Mode.

OPERATION AS A DIVING GAUGE

Entering Settings relating to diving activities is only available in Free Surface Mode which also allows access to a Countdown Timer (separate from the

Watch CDT), Log, and History Modes.

PC INTERFACE

Interface with a PC, to allow uploading settings and downloading data, is accomplished by connecting the Mundial 2 to a PC USB Port using the

special BCI (Beuchat Computer Interface) USB Interface Cable.

The software program together with the USB Driver required is on the BCI CD, as can be downloaded from the Beuchat web site. The program's HELP

serves as the user manual which can be printed for personal use.

The Settings Upload portion of the BCI program can be used to set/change the Main Time, Date, Set A group (Alarms), and Set U group (Utilities)

using the same Interface System.

Information available for retrieval (Download) from the Mundial 2 to the PC Download portion of the program includes dive number, surface interval

time, start depth, end depth, maximum depth, elapsed dive time, start date, start time, lowest temperature under water, sampling rate, dive proﬁle, and

Set Points.

The BCI program also allows update of select versions of the Mundial 2's ﬁrmware (operating system software).

• Refertopage24formoredetailsrelatingtoPCInterface.

ALPHA NUMERIC MESSAGES

The upper line of digits on the LCD screen is used to convey alpha numeric graphic Messages such as Day of the Week, Mode of Operation, items

being Set, and Alarm identiﬁcation. At times, the lower line is also used to display graphics such as On/Off, Set, and Seconds.

AUDIBLE ALARM

The Audible will not activate if the Alarm is set OFF, a group A setting which completely disables it.

When Alarms strike, the Backlight will come On if Off and remain On until you turn it Off by pressing/releasing the L button or automatically after 10

seconds.

Situation that will sound (2) 2 second beeps -

• EDT(RepeatingElapsedDiveTime)Alarm,ifsetOn.

Situations that will sound 3 sets of (3) 1 second beeps -

• WatchDailyAlarm(surfaceonly),ifsetOn.

• WatchCountdownTimerreaches0:00(hr:min),ifsetOn.

• FreeModeCountdownTimerreaches0:00(min:sec),ifsetOn.

• SRT(SurfaceRecoveryTime)Alert,ifsetOn.

• RDI(RepeatingDepthInterval)Alarm,ifsetOn.

Situation that will sound (3) sets of (3) .125 second beeps -

• DescendingDepthAlarmsDD1,DD2,andDD3,ifsetOn.

Main Sequence

(while at home)

Main Time

Alternate Time

Countdown Timer

Chronograph

Daily Alarm

Alternate Sequence

(at a travel location)

Alternate Time

Main Time (home)

Countdown Timer

Chronograph

Daily Alarm

Fig. 1 - MAIN TIME

User Manual

BACKLIGHT

To turn the Backlight On, press and release the L button (< 2 seconds). The Backlight will remain On for the Duration time set (a Set U selection) unless

you turn it Off during that time.

• TheBacklightwillcomeOn(evenifsetOFF)whenAlarmsstrikeandremainOnuntilturnedOfforautomaticallyafter10seconds.

• PressingandreleasingtheLbutton(<2seconds)whiletheBacklightisOnwillturnitOff.

• DepressingtheLbuttonfor2secondswhiletheBacklightisOn,willresetthetimerandextendtheOntimetothefullDurationtimeset.

• IftheLbuttonisdepressedfor>60seconds,theBacklightwillbedisabledandnotturnOnuntilthebuttonisreleasedthenpressed/released

again.

• TheBacklightwillbedisabledwhenthereisaLowBatterycondition,andbereenabledoncethebatteryisreplaced.

• ExtensiveuseoftheBacklightreducesBatteryuselife.

• TurningtheBacklightOffwhenitisnotbeingusedwillhelpextendBatteryuselife.

• TheBacklightdoesnotoperatewhentheunitisconnectedtoaPC.

POWER SUPPLY

TheMundial2utilizes(1)3voltCR2430LithiumBattery.

The Mundial 2 checks Battery voltage every 2 minutes during operation while on the surface.

• IfvoltagedecreasestotheWarninglevel(2.75volts),theBatteryiconwillappearonSurfacedisplayscreens(Fig.2a)asanindicationthatthe

Battery should be changed prior to commencing a series of dives.

• IfvoltagedecreasestotheAlarmlevel(2.50volts),theBatteryiconwillashandoperationwillautomaticallyreverttoMainTimescreen.The

Mundial 2 would then only operate in Watch modes until the Battery becomes completely depleted.

• LowBatteryWarning/AlarmconditionsarenotdisplayedduringDiveModes.

• IfaLowBatteryConditionwasnotdisplayedpriortostartingaDive,andaLowBatteryConditionoccursduringthedive,therewillbesufcient

Batterypowertomaintainoperationfortheremainderofthatdive.Uponsurfacing,themessageCHNG>>BATTwillscroll(Fig.3),then

operation will automatically revert to the Main Time screen and only operate in Watch modes until the Battery becomes completely depleted.

Fig. 2 - LOW BATTERY

WARNING

Fig. 3 - LOW BATTERY

ALARM

Each display represents unique pieces of information. It is imperative that you understand the formats,

ranges, and values of the information represented to avoid any possible misunderstanding that could result

in error.

Understand which Time displays are represented as Minutes: Seconds and which are Hours:Minutes.

You must also understand the icons, symbols, and alpha/numeric messages presented.

The Informational Displays are described in detail as the various operating modes they appear in are

presented throughout this manual.

User Manual

WATCH MODE

FEATURES & DISPLAYS

User Manual

LOCAL DEFAULT TIME

Watch Main Time (Fig. 4) is the current Time at your home location and is normally selected as the Local Default Time.

The normal Watch screen sequence accessed with momentary presses (less than 2 seconds each) of the M button is -

 MainTime>AltTime>CDTimer>Chrono>DayAlarm.

Watch Alt (Alternate) Time (Fig. 5), which is normally set by Hour Differential, is the current Time at a remote travel location. Upon arrival at the

location, Alt Time can be interchanged with Main Time to make it the Local Default Time while visiting the travel location.

• Mwillthenaccessthescreensinthissequence-

 AltTime>MainTime>CDTimer>Chrono>DayAlarm

• S(2sec),whileviewingAltTime,willreplaceMainTimewithAltTimethatwillthenbecometheLocalDefaultTimeuntilchanged.

• M(2sec),ornobutton(2min),whileviewinganyoftheWatchModedisplays,willreverttoWatchTime.

MAIN TIME (home), information includes:

> Batteryicon,ifaLowBatteryConditionexists.

> AM(orPM)icon,whensetfor12HourFormat.

> DayoftheWeekgraphicMON(orTUE,WED,THU,FRI,SAT,SUN).

> TimeofDay(hr:min:sec)(Fig.6a).

> Alarmicon,iftheDailyAlarmissetOn(Fig.6b).

> Month.Day(Day.MonthifsetforMetric)(Fig.6c).

• A(<2sec)toaccessTemperature(Fig.6A).

• A&S(2sec)toaccesstheSetDateFormat.

• A(2sec)toaccessLogandHistory.

• M(<2seceachtime)tostepthroughtheWatchModes.

• S(<2sec)tosilenceandacknowledgetheDailyAlarm.

• L(press)tooperatetheBacklight.

SET DATE/TIME

This Mode allows the Date and Time of Day to be set at the location you are at (home or travel location).

Thereare4Setscreens->

 DateFormat>>HourFormat>>TimeofDay>>Date.

> SetDate/TimecanonlybeaccessedwhentheLocalDefaultTime(MainorAlternate)isdisplayed.

• M(2sec),orifnobutton(2min),reverttoWatchTime.

Set Date Format, information includes (Fig. 7):

> GraphicD-M(orM-D)ashing,D=Day,M=Month.

> GraphicdAtE.

• S(<2sec)totogglebetweenD-MandM-D.

• A(<2sec)tosavethesettingandaccessSetHourFormat.

Set Hour Format, information includes (Fig. 8):

> GraphicHOUR.

> 12(or24)ashingwithTIMEicon.

• S(<2sec)totogglebetween12and24.

• A(<2sec)tosavethesettingandaccessSetTime(Hour).

A (2 sec), repeatedly, will step through the Time/Date Settings, bypassing those that don't require setting.

The AM (or PM) icon is displayed on Time screens when Hour Format is set for 12 Hour.

The Year will not be displayed in any Mode other than Set Date. The Date will reset to 1.1 2011 when the Battery is replaced.

Day of the Week is set automatically based upon the Date that has been set.

Set Time, information includes (Fig. 9):

> Graphics12HRwithAM(orPM)icon(or24HR).

> TimeofDay(hr:min)lastsetwithTIMEicon,Hourdigitsashing.

• S(hold)toscrollupwardthroughtheHourSetPointsfrom12:AMto11:PM(or0:to23:ifsetfor24HourFormat)atarateof8persecondin1

Hour increments.

• S(<2sec)tostepupwardthroughtheHourSetPointsoneatatime.

• M(<2sec)tostepbackthroughtheHourSetPointsoneatatime.

• A(<2sec)tosavetheHoursettingandashtheMinutedigits.

• S(hold)toscrollupwardthroughtheMinuteSetPointsfrom:00to:59atarateof8persecondin1Minuteincrements.

• S(<2sec)tostepupwardthroughtheMinuteSetPointsoneatatime.

• M(<2sec)tostepbackthroughtheMinuteSetPointsoneatatime.

• A(<2sec)tosavetheMinutesettingand/oradvancetoSetDate.

Time of Day will have to be set after the Battery is removed/replaced.

Fig. 4 - MAIN TIME

Fig. 5 - ALT TIME

Fig. 6 - MAIN TIME

(July 14)

Watch Time/Date

can also be set using

the Settings Upload

feature of the ACI PC

Interface software.

Prior to shipment from

the factory, any error

of the Main Time

is determined and

corrected.

Fig. 6A - WATCH ALT

Fig. 8 - SET HOUR

FORMAT

Fig. 7 - SET DATE

FORMAT

Fig. 9 - SET TIME

(hr:min)

User Manual

Set Date, information includes (Fig. 10):

> GraphicYEAR.

> Date(Year,Month,Day)withYeardigitsashing.

• S(hold)toscrollupwardthroughtheYearSetPointsfrom2011to2054(withleapyearcorrections)atarateof8persecondin1Year

increments.

• S(<2sec)tostepupwardthroughtheYearSetPointsoneatatime.

• M(<2sec)tostepbackthroughtheYearSetPointsoneatatime.

• A(<2sec)tosavetheYearsetting,replacegraphicYEARwithMNTH,andashtheMonthdigits.

• S(hold)toscrollupwardthroughtheMonthSetPointsfrom1to12atarateof8persecondin1Monthincrements.

• S(<2sec)tostepupwardthroughtheMonthSetPointsoneatatime.

• M(<2sec)tostepbackthroughtheMonthSetPointsoneatatime.

• A(<2sec)tosavetheMonthsetting,replacegraphicMNTHwithDAY,andashtheDaydigits.

• S(hold)toscrollupwardthroughtheDaySetPointsfrom1to31maxatarateof8persecondin1Dayincrements.

• S(<2sec)tostepupwardthroughtheDaySetPointsoneatatime.

• M(<2sec)tostepbackthroughtheDaySetPointsoneatatime.

• A(<2sec)tosavetheDay(andfullDate)settingandreverttoWatchMain.

ALT (ALTERNATE) TIME

As previously indicated, ALT TIME is the current Time at a remote travel location. Upon arrival at the location, ALT Time can be interchanged with Main

(home) Time to make it the Watch Default Time while visiting the travel location.

• M(<2sec)whileviewingWatchMaintoaccessALTTIME.

ALT Time, information includes (Fig. 11):

> Batteryicon,ifLowBattery.

> AM(orPM)icon,if12HourFormat.

> Lazy8symbol(Fig.11a)indicatingTimeisALTTime.

> DayoftheWeekgraphicMON(orTUE,WED,THU,FRI,

SAT, SUN).

> TimeofDay(hr:min:sec)atALTlocation.

> Alarmicon(solid),iftheDailyAlarmissetOn

> Day.Month(orMonth.Day(or).

• M(<2sec)tostepthroughtheotherWatchModes.

• S(<2sec)tosilenceandacknowledgetheDailyAlarm.

• S(2sec)tointerchangeALTTimewithMainTimemakingittheWatchDefaultTime.

• L(press)tooperatetheBacklight.

• A&S(2sec)whileviewingMainTimetoaccessSetALTTime.

• A&S(2sec),whenALT(travellocation)TimeisselectedastheWatchDefaultTime,toaccessSetWatchTimewiththeHourFormatSetPoint

ashingallowingDateandTimeitemstobesetthesameastheycouldbesetathome.

• M(2sec)toreverttoMainTime.

SET TIME DIFFERENTIAL

Time Differential can be set OFF, or to an Hour based numeric time ranging from + 1 through + 23 through - 23 through - 1 (hours).

Once the Differential is selected and saved, ALT Time/Date values will be based upon the Watch Main Time Set Points plus/minus the Differential set.

Time Differential can only be set when Main (home) Time is selected as the Watch Default Time and ALT Time is accessed by pressing the M button

for 2 seconds.

Main(home)Time>ALTTime>SetDifferential

If Watch Date/Time is set while ALT Time is selected as the Watch Default Time (while you are at a travel location), the Differential will automatically

change Main (home) Time based upon an inverted Differential.

Set Time Differential, information includes (Fig. 12):

> Lazy8symbolandgraphicSEt.

> GraphicOFF,orthe+/-HourDifferentialdigits,ashingwithTIMEicon.

• S(hold)toscrollupwardthroughSetPointsfromOFFto+01through+23then-23through-01toOFFatarateof8persecondinincrementsof

01.

• S(<2sec)tostepupwardthroughtheSetPointsoneatatime.

• M(<2sec)tostepbackthroughtheSetPointsoneatatime.

• A(<2sec)tosavethesettingand/oradvancetoALTTIME.

• M(2sec)ornobutton(2min)toreverttoWatchMain.

Fig. 10 - SET YEAR

Fig. 11 - ALTERNATE