BETCO CREWMAN 20HD User manual

Electronic Service

Manuals

This electronic document is provided as a service to our customers.

Wedonotcreatethecontentsoftheinformationcontainedinthisdocu-

ment. Shouldyouhavedetailedquestionspertainingtotheinformation

contained in this document, you may contact Michco, or the manufac-

turer which provided the original information in this electronic deliver-

able. Michco’sonlypartin this electronic deliverable was the electronic

assemblyprocess. Byprovidingthismanualonlinewearenotguaran-

teeing parts availability.

You may contact Michco through the following methods:

Phone (517) 484-9312 or (800) 331-3339

2011 N. High St. -- Lansing, Michigan -- 48906

Fax: (517) 484-9836

Email: [email protected]

Web site: www.Michco.Com

Parts Web site: www.FloorMachineParts.Com

Order Parts on Line at:

www.FloorMachineParts.Com

Directly to Parts & Service:

By Email: [email protected]

By Fax: (517) 702-2041

By Voice: Use numbers above.

Serving the Cleaning Industry Since 1922

Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.

ManualsaresubjecttoManufacturer’sreproductionlimitations. Originalsorreproductionswereprovidedbymanufacturers

through a request. We make no warranty as to the correctness of information provided in this document and you assume

allrisk. By placing thesemanualsonlinewe are notdeclaringourcorporation to be anmanufacturerauthorizeddealer or

provider, please check ourwebsiteforauthorizedmanufacturerswerepresent.

Heavy Duty Floor Machines

Operator’s Manual

CREWMAN™20 HD Item #83014-00

CREWMAN™17 HD Item #83013-00

FOREMAN™ 20 HD Item #85021-00

FOREMAN™ 17 HD Item #85028-00

FOREMAN™20 DS Item #83010-00

FOREMAN™17 DS Item #83009-00

Specifications

•Cleaning Path/Pad Size: 17”, 20”

•Hour Meter: Yes / 0.1 hour resolution

•Motor: 1.5 hp, 120v, 12 A, 60 HZ

•Pad Speed: 175 RPM

•Power Cord: 50’ 14/3 Safety Yellow

•Handle Grips: Anti-Fatigue

•Operating Wheels: 5” Non-marking

•Productivity: Bonnet-1100 sq.ft/hr., buff/scrub-2400 sq.ft/hr., strip-800

sq.ft/hr.

•Weight: 90 lbs.

•Dimensions: Length 24.25”, Width 20”, Height 48”

! WARNING! IMPORTANT SAFETY INSTRUCTIONS

Carefully read and understand this manual before operating this machine.

To reduce risk of fire, electric shock, or injury:

•Do not operate in explosive areas, near flammable liquids or gases.

•Only plug into a properly grounded outlet.

•Do not exposure to rain, store indoors.

•Do not plug in or handle machine with wet hands.

•Do not operate the machine with a damaged cord or plug.

•Do not block or disconnect safety lever.

•Do not leave machine plugged in while unattended.

•Unplug machine before servicing.

•Do not put fingers under the pad or pad holder.

•Unplug the machine before installing or removing the pad.

•Use only high speed burnishing pads.

•Do not put any foreign object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, & anything that may reduce airflow.

•Keep hair, loose clothing, fingers, & all parts of body away from openings

& moving parts.

•Turn off all controls before unplugging.

•Do not use in or around flammable or combustible liquids such as gasoline

or use in areas where they may be present.

•Connect to a properly grounded outlet only. See grounding instructions.

Betco, Corp. 8/27/2007 Page 3 Floor Machine

Grounding Instructions

This machine must be grounded. If it should electrically malfunction, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This machine is equipped with a cord having an equipment-grounding

conductor & grounding plug. The plug must be plugged into an appropriate outlet

that is properly installed & grounded in accordance with all local codes &

ordinances.

! DANGER!

Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or service person if you are in

doubt as to whether the outlet is properly grounded. Do not modify the plug

provided with the machine. If plug will not fit the outlet, have a proper outlet

installed by a qualified electrician.

Replace the plug if the grounding pin is damaged or broken.

Extension cords connected to this machine should be 12 gauge, 3-wire cords

with 3-prong plugs & outlets. DO NOT use extension cords more than 50 feet

long.

Betco, Corp. 8/27/2007 Page 4 Floor Machine

Operating Instructions

Check machine for damage to cord or plug.

Use suitable pads or brushes.

To install or change the pad:

1. Unplug the machine.

2. Tip the machine back on the wheels.

3. Install pad driver or brush.

4. Center the pad on the pad driver.

To operate the machine:

1. Plug into a grounded outlet.

2. Release the handle and lower it.

3. The handle can be locked into a comfortable position for the operator or used

free floating.

4. Press the safety lever and squeeze the trigger to start the machine.

5. Do not operate in one place as damage to the floor or finish could result.

6. Do not operate the machine with the handle in the upright position.

7. Remove the pad after every use.

8. Store the machine tilted back on the transport wheels.

9. Use only new or clean pads and reverse them as needed.

Maintenance Instructions

To maintain appearance – wipe the machine with a damp cloth after use.

Warning – Unplug the machine before servicing

This machine is equipped with an hour meter to signal maintenance intervals of

250 hours. It will begin flashing at 245 hrs and stop at 255 hrs to signal the

operator to check the following:

1. Check the motor brushes for wear or excessive arcing.

2. Check the cord and electrical system.

3. Check the safety lockout on the trigger.

4. Check wheels.

Betco, Corp. 8/27/2007 Page 5 Floor Machine

INSIDE

TUBE

INSIDE

TUBE

THESE

PARTS

INSIDE

TUBE

INSIDE

BASE

INSIDE

CORD

HOOK

INSIDE

HANDLE

CAM

LOCK

HANDLE PARTS

ROD THROUGH BASE

Betco, Corp. 8/27/2007 Page 6 Floor Machine

ITEM NO.

BETCO PART #

DESCRIPTION

QTY.

E283523

NYLON CABLE TIE

E283132

CORD, HANDLE, 14-3

E283789

NUT, ELECTRICAL CONDUIT, 1/2"

E283131

CORD, 75 FEET, 14-3 ST

E283496

STRAIN RELIEF FOR REPLACEMENT

E281064

BOLT, HEX, 1/4-20 x 3/4

E283520

NUT, NYLOCK, 1/4-20

E283127

GRIP

E283427

SCREW, PHILLIPS, No. 6 x 1

E283426

SCREW, PHILLIPS, 1/4-20 x 1.75

E283130

SPRING

E283270

CLIP, SPRING

E285032

SWITCH

E283129

SAFETY LOCK

E282752

TRIGGER, SWITCH

E283325

COVER, SWITCH BOX

E283125

SWITCH BOX, HANDLE, DUAL SPEED

E281105

PLATE, SWITCH

E283451

HANDLE TUBE, 7/8 x 16

E281065

BOLT, HEX, 1/4-20 x 1-3/4, GRADE 5

E281070

NUT, NYLOCK, 1/4-20

E283519

GROMMET, .375 ID

E283137

CORD HOOK

E283134

BOLT, ADJUSTABLE, CAM, 5/16-18

E283135

OVAL WASHER

E283266

PIN, .25 x .75

E283268

CAP, PUSH, .25

E283133

HANDLE, CAM LOCK

E281379

WASHER, SPRING, 3/8

E281063

NUT, NYLOK, 5/16-18

E283145

WASHER, NYLON

E281077

BOLT, SHOULDER, 3/8 x 1

E283267

WASHER, SPRING, 1/4

E283269

WASHER, SPRING, 1/2

E283143

CAPS, AXLE, 0.5

E282729

HANDLE ATTACHMENT, WELDED "T"

E283136

BRACKET, FLAT, HANDLE

E283711

HANDLE TUBE

E283452

AXLE, 1/2 x 12.375

E283662

SPEED CONTROL, DUAL SPEED MACHINE

E283652

HEAT SINK ROD

E283608

SWITCH, ROCKER, 2 SPEED

HANDLE PARTS

NOTE:

DUAL SPEED FLOOR MACHINE HAS ALL PARTS LISTED.

SINGLE SPEED MACHINE DOES NOT HAVE PARTS 40, 41, AND 42.

Betco, Corp. 8/27/2007 Page 7 Floor Machine

BASE, MOTOR, AND WHEELS

OR 18B

910

OR 17B

Betco, Corp. 8/27/2007 Page 8 Floor Machine

ITEM NO.

BETCO PART #

DESCRIPTION

QTY.

E283147

HOUR METER

E283570

SCREW, PHILLIPS, 1/4-20 x 1

E489334

WASHER, FLAT, 1/4

E281078

WASHER, LOCK, 1/4

E281068

WASHER, FENDER, 1/4

E283425

SCREW, PHILLIPS, 1/4-20 x 1

E283141

BUMPER

E281397

COVER, MOTOR, BURGANDY, LOW SPEED

E283144

WHEEL, 5 INCH

E283145

WASHER, NYLON

E283269

WASHER, SPRING, 1/2

E283143

CAPS, AXLE, 0.5

E283379

AXLE, 1/2 x 13.875

E281067

WASHER, LOCK, 5/16

E281062

WASHER, FLAT, USS, 5/16

E283641

BOLT, HEX, 5/16-18 x 1.5

E281129

BASE, 20 INCH, LOW SPEED

E283191

MOTOR, 1.5 HP, AC

17B

E281127

BASE, 17 INCH, LOW SPEED

18B

E281106

MOTOR, 1.5 HP, DUAL SPEED

BASE, MOTOR, AND WHEELS

Betco, Corp. 8/27/2007 Page 9 Floor Machine

This manual suits for next models

Table of contents

Other BETCO Floor Machine manuals

BETCO

BETCO OPTIMA XR Series Product manual

BETCO

BETCO STEALTH ASD20B Product manual

BETCO

BETCO OPTIMA XR Series Product manual

BETCO

BETCO xt3-27 User manual

BETCO

BETCO WS24 User manual

BETCO

BETCO Foreman 1600 User manual

BETCO

BETCO Optima QT E12317-00 User manual

BETCO

BETCO Big Bertha User manual

BETCO

BETCO STEALTH DRS21BT MicroRider User manual

BETCO

BETCO Pourman 25 User manual

BETCO

BETCO Fiber PRO 8 BFP8 10080210 User manual

BETCO

BETCO XT3 User manual

BETCO

BETCO E12327-00 BIG BERTHA XSM30 Product manual

BETCO

BETCO FiberPRO 15C Product manual

BETCO

BETCO GeneSys 15 Product manual

BETCO

BETCO Crewman DC200 User manual

BETCO

BETCO PREDATOR SERIESE Product manual

BETCO

BETCO FOREMAN 17DS Product manual

BETCO

BETCO FiberPRO 8 BFP8 User manual

BETCO

BETCO Lil Bertha XSM 24 User manual

BETCO

BETCO Optima QT E12317-00 Product manual

BETCO

BETCO E12314-00 Product manual

BETCO

BETCO XT3 27 User manual

BETCO

BETCO crewman dc2000 E83018-00 User manual

Popular Floor Machine manuals by other brands

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Instructions for use

Numatic

Numatic ET 4045 Owner's instructions

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE manual

Mytee

Mytee 8070 Mytee-Lite instructions

Kärcher

Kärcher B 140 R manual

Triple S

Triple S Ace 26T1 user guide

Nilfisk-Advance

Nilfisk-Advance SW 750 Service manual

Tornado

Tornado Marathon 2000 98190 Operation & maintenance manual

Windsor

Windsor ADMIRAL Admiral 8 Specifications

Numatic

Numatic TTB 1117/100 Owner's instructions

Tennant

Tennant 8210D Operator's manual

Nobles

Nobles Frontier Operator and parts manual

lavina

lavina 21-X user manual

KENT

KENT Edge 28B Service manual

Tennant

Tennant 215 Operator and parts manual

Windsor

Windsor BDP 51/2000C operating instructions

CleanFreak

CleanFreak DURA-18HD Operator's manual

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST How-to guide