Besam PowerSwing User manual
AAE320
The New Besam Swing door operator
PowerSwing
Standard cover Special cover
Door leaf-mounted Double door operators
Main models of the PowerSwing operator
• The operator works electro-hydraulically.
• Closing power from a coil spring
• The open position is kept by a hydraulic valve.
• ”Lock kick” to overcome the resistance of a striking plate
• Dimension standard cover LxHxD 716x110x110 mm
1. Mounting plate
2. Motor/ Pump
3. Valve
4. Hydraulic unit
5. Drive shaft
10. Extension unit, EXA (option)
11. End plate
12. Programme selector, PS-3 (option)
13. Cover
14. Bearing sleeve
15. Cable holder
16. Lid
Identification PowerSwing
6. Spring tube
7. Cable inlet
8. Mains connection
9. Control unit, CSDA
Arm systems
PUSH Arm system PULL Arm system
Wall mounted operator, arm system PUSH
• Decide X
• Draw a line on the wall for the underside of the mounting plate
• Door adaptor should
not be mounted on
glass bead
• Extension has to be
used if operator must
be mounted higher up
on the wall
* Min. 31 mm to
enable drive arm to
pass underneath
Note!
Wall mounted operator, arm system PUSH
• Cut out the appropriate template from the card board box
• Ensure that the template aligns with the drawn line (X) and the L1.
• Use the stickers in the mounting kit to fix the template to the wall
• Punch where to drill
C
Wall mounted operator, arm system PUSH
1. Drill the four mounting holes and the two holes for the door fitting.
2. Remove the template.
3. Tap, plug, or reinforce with rivnuts and screw the drive unit tight.
Mounting the PUSH drive arm
1. Adaptor
2. Drive arm
1. Remove the door fitting from the arm system.
2. Screw the door fitting to the door leaf tight.
3. Mount the drive arm and adaptor on the operator drive shaft at an
angle of 90° to the wall.
4. Ensure that the teeth of the adaptor engage fully with the operator
shaft. Tighten the screw to a torque of 25 Nm. (19 lbf.ft)
Other manuals for PowerSwing
1
Table of contents
Other Besam Door Opening System manuals
Popular Door Opening System manuals by other brands
Häfele
Häfele Finetta T 70 VF manual
AGS
AGS D-PL Instructions for fitting, operating and maintenance
Stanley
Stanley MA900ñ Installation and owner's manual
WITTUR
WITTUR Hydra Plus UD300 Instruction handbook
Alutech
Alutech TR-3019-230E-ICU Assembly and operation manual
MPC
MPC ATD ACTUATOR 50 ATD-313186 Operating and OPERATING AND INSTALLATION Manual