Bematech SB9095 User manual
SB9095 All-in-one Touch POS Terminal
USER MANUAL
1
Table of Contents
1Introduction..........................................................................................2
1.1 Safety Information ........................................................................................ 2
1.2Electromagnetic compatibility statement................................................. 3
2Overview................................................................................................4
2.1 Appearances.................................................................................................... 4
2.2Rear panel I/O connectors ............................................................................. 5
2.3Dimensions ..................................................................................................... 6
3Hardware Installation..........................................................................7
3.1 Adjusting the System Stand..........................................................................7
3.2 Installing the Power Cord, Power Adapter, and Network Cable............... 8
3.3Installing MSR (optional) .............................................................................10
3.4Installing Customer Display (optional) .......................................................11
3.5Installing Second LCD (optional)..................................................................11
4Setup and Driver Installation............................................................ 13
4.1 Mother Board Connectors............................................................................13
4.2 Jumper settings .............................................................................................15
4.3 Motherboard BIOS settings......................................................................... 17
4.4 Setting the LCD brightness..........................................................................18
4.5 Touch screen driver installation..................................................................19
5Troubleshooting ................................................................................ 24
6Specifications .................................................................................... 26
2
1 Introduction
Thank you for purchasing the SB9095 all-in-one touch POS terminal. The SB9095
offers highly enhanced features, with easy connection to various optional devices
for optimal performance. This easy-to-use POS terminal is designed to help you
enhance your business flexibility and offer superior customer experience.
Bematech is committed to continuously improve product quality and provide better
after-sales service. In order to take full advantage of our devices, we strongly
recommend that you take the time to read this manual before setting up software
solution.
Note: Information in this manual may change without prior notice.
1.1 Safety Information
Before plug in the product, please make sure the power you provide meets
the power requirements (such as voltage, frequency); Make sure the ground
terminal of the power outlet is working properly.
To avoid electric shocks, disconnect the power cord from the electrical outlet
before relocating the system.
Lightning may damage this product. During lightning storms, unplug the
network cable, power cable and any other connections.
Turn off power before connecting any devices (except USB devices) to the
terminal.
Do not attempt to open the chassis. You may be hurt by electric shock. For
service, call your place of purchase.
Do not spill liquid on the terminal. Do not place any objects into the
ventilation holes of this product. It may cause short-circuit of the internal
components and cause a fire or electric shock.
After the terminal is stored below temperature of 10 ° C, please place it in
room temperature (10-35 ° C) in the original packing for at least two hours to
allow the terminal to restore to room temperature before operation. This is
to avoid condensation that might cause electrical damage.
Keep the terminal clean, dry, and away from dust, moisture and direct
sunlight.
Do not use harsh chemicals or strong cleaning solvents to clean the monitor
3
screen. Wipe it clean with a soft terry cloth applied with a mild solution
Do not share the same power outlet with high-power electrical appliances;
keep distance from high level magnetic interference.
Do not the use sharp pointed objects to work with the touch screen to avoid
damage to the screen.
When the following occurs:
Liquid gets inside the POS terminal;
Accidental physical damage;
The power cord or plug is damaged;
POS terminal produces a burning smell;
Immediately disconnect the power supply, unplug the power cord, and contact a
qualified service technician.
1.2 Electromagnetic compatibility statement
FCC NOTICE
This device complies with Part 15 of FCC Rules. Operations are subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
EUROPEAN COMMUNITY (CE) MARK OF CONFORMITY
This product is in conformity with the protection requirements of EU Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility. Bematech / Logic Controls cannot
accept responsibility for any failure to satisfy the protection requirements
resulting from a non-recommended modification of the product. This product
has been tested and found to comply with the limits for Class A Information
Technology Equipment according to CISPR 22 / European Standard EN 55022.
The limits for Class A equipment were derived for commercial and industrial
environments to provide reasonable protection against interference with
licensed communication equipment.
4
2 Overview
2.1 Appearances
5
2.2 Rear panel I/O connectors
At the rear panel of the SB9095 is a row of external I/O device connectors
detailed as follows:
6
2.3 Dimensions
7
3 Hardware Installation
3.1 Adjusting the System Stand
CAUTION:
Never open the unit unless it is in the lowest horizontal position. Otherwise,
system components may be damaged.
3.1.1 Place the Touch Terminal on a stable surface and carefully lift up the LCD
panel.
NOTE:
When handling the LCD panel, do not grab the attached peripheral devices to
avoid damage to devices.
3.1.2 Support the stand firmly with one hand while pushing the back of the LCD
panel backwards with the other hand.
NOTE:
• Carefully apply force to tilt the unit towards the backside.
•Unfold the stand to the first stop to lock the screen in the 30-degree
position. Then unfold to the second stop to lock in 60-degree position.
8
3.1.3 Flip the LCD monitor up towards the front.
NOTE:
• The stand joints are designed to be tight to provide stability in operation.
So, you might need to apply some force to maneuver the Terminal.
•Make sure always lift the stand and display on the lower hinge to the
position "a" before adjusting the upper hinge.
3.2 Installing the Power Cord, Power Adapter, and Network Cable
3.2.1 Place the Touch Terminal on a soft and flat surface, with the LCD panel facing
the down. Remove the cable compartment cover and the connector cover.
9
3.2.2 Route the power adapter cable and the network cable through the cable
compartment (a). Then connect the network cable to the LAN port, and
connect the power adapter to the 24V DC IN jack (b).
3.2.3 Align and install the cable compartment cover and the connector covers.
3.2.4 Connect the power adapter to the power cord. Then plug the other end of the
power cord to an electrical outlet.
Table of contents
Other Bematech Touch Terminal manuals
Bematech
Bematech MP-4000 User manual
Bematech
Bematech SB-9015D User manual
Bematech
Bematech SB1015AW User manual
Bematech
Bematech SB9011D User manual
Bematech
Bematech SB1015 User manual
Bematech
Bematech SB9015T User manual
Bematech
Bematech SB9015F User manual
Bematech
Bematech FIT Basic User manual
Bematech
Bematech SB8015A User manual
Bematech
Bematech SB 8010A User manual
