2
installation
The unit is designed for a 12V DC negative ground operation system only. Before
installing the unit, make sure your vehicle is connected to a DC12V negative ground
electrical system.
The negative battery terminal must be disconnected before making connections,
which can decrease the chance of damaging the unit due to a short circuit.
Be sure to connect the color-coded leads correctly according to the diagram.
Incorrect connections may cause the unit to malfunction or damage the vehicle’s
electrical system.
Be sure to connect the speaker (-) leads to the speaker (-) terminal. Do not connect
the left and right channel speaker cables to each other or to the vehicle body.
Do not block vent or radiator panel, Blocking them will cause heat build-up and may
result in fire.
After the completion of the installation and begin to play the unit (including
replacing the battery), please press the RESET button on the front panel with
pointed objects (such as a ball-point pen) to set the unit to the initial status.
WIRING DIAGRAM
10A
1. PARKING BRAKE
2. STEERING WHEEL CONTROLS
3. ANTENNA/REMOTE OUTPUT
4. ACC+12V
5. REVERSE GEAR TRIGGER FOR
BACKUP CAMERA INPUT
6. BATTERY+
7. ILLUMINATION
8. GROUND
CONNECTOR A CONNECTOR B
9. REAR RIGHT SPEAKER (+)
10. FRONT RIGHT SPEAKER (+)
11. FRONT LEFT SPEAKER (+)
12. REAR LEFT SPEAKER (+)
13. REAR RIGHT SPEAKER (-)
14. FRONT RIGHT SPEAKER (-)
15. FRONT LEFT SPEAKER (-)
16. REAR LEFT SPEAKER (-)
ISO SOCKET HARNESS PLUGS
L-OUT
VIDEO OUT 1
VIDEO 2 INPUT
R-OUT
17
18
19
20
VIDEO OUT 2
VIDEO 1 INPUT
RADIO ANTENNA
AUX AUDIO L/R IN
21
22
23
24
9 10 11 12
1 2 3 4
13 14 15 16
5 6 7 8 17 18 19
20 21 22 23
24
