Belkin F5U234 User manual

Hi-Speed USB 2.0

4-Port Hub

Connect up to 4 Hi-Speed

USB 2.0 or 1.1 devices

F5U234User Manual

Hi-Speed USB 2.0

4-Port Hub

Connect up to 4 Hi-Speed

USB 2.0 or 1.1 devices

F5U234User Manual

Table of Contents

Introduction ...............................................................................................1

Overview .....................................................................................................2

Features ...............................................................................................2

Package Contents ................................................................................2

Technical Specifications ......................................................................3

Installation .................................................................................................4

Information .................................................................................................7

Introduction

Welcome to Belkin USB 2.0!

Congratulations and thank you for purchasing the Belkin Hi-Speed USB 2.0

4-Port Hub (the Hub). The Hub provides four downstream USB ports that

offer backward-compatible, Plug-and-Play connectivity with all USB devices,

including USB 1.1 (or low- and full-speed) devices, as well as with USB

2.0 (or high-speed) devices. This includes such peripherals as scanners,

printers, mass-storage devices, and high-resolution cameras. The Hub is

self-powered, which allows the cascading of devices with additional hubs, so

that up to 127 USB devices may be connected to a single port.

The Hub is uniquely designed to allow the user to position the four

downstream ports toward the back of the desktop for efficient cable

management, or to the front of the desktop for easier port access. The Hub

also provides a status LED for each individual port and a master power LED.

Overview

Features

• Compliant with Universal Serial Bus specification 2.0

(data rate 1.5/12/480Mbps)

• Backward-compatible with Universal Serial Bus specification 1.1

(data rate 1.5/12Mbps)

• Compatible with Windows® 98 SE, Me, 2000, and XP

• Approved by USB Implementers Forum (USB-IF)

• Supports Plug-and-Play specifications

• Supports “hot swapping” of USB devices

• Over-current detection and protection

• Individual port-status indicator LEDs

• Four 480Mbps downstream ports

• Fully compatible with USB 1.1 and USB 2.0 devices

• Compact, slim-line design

• Multiple hubs may be stacked on top of one another

Package Contents

• Hi-Speed USB 2.0 4-Port Hub

• AC Power Adapter

• User Manual

• USB device cable

Technical Specifications

Upstream Ports (1)

Downstream Ports (4)

Power Mode Self-powered/bus-powered

Per-Port Voltage DC +5V

Per Port Current Self-Powered Mode: 500mA (max)

Bus-Powered Mode: 100mA (max) (Ports one and two only)

Operating Temperature 5º C ~ 40º C

Storage Temperature -20º C ~ 60º C

Enclosure ABS

Power Supply

Output: DC 5V, 2.1A

Plug Size: 3.5mm (outer)

1.0mm (center)

Plug Polarity: Center Positive

Main Power LED Color Definitions:

Off Not operational

Red Operational

Port Status LED Color Definitions:

Off Not operational, or no device connected

Green Fully operational

Amber Over-current condition

Important Note: Please do not connect any USB devices to the Hub until

instructed to do so in step 4 of this installation procedure.

Overview

Important Note: Please do not connect any USB devices to the Hub until

instructed to do so in step 4 of this installation procedure.

1. Plug the AC adapter into a wall outlet, or surge suppressor. Plug the DC

connector into the DC Power Jack found on the side of the Hub.

Important Note: The Hub may be used without the power supply when

connecting devices that draw 100mA of current or less, however, only port 1

and port 2 will be functional.

2. Plug the flat end of the provided USB device cable into the downstream

port of your computer or downstream port of another hub, then plug the

mini 6-pin connector of the device cable into the upstream port on the

rear of the Hub.

Important Note:The Hub must be connected to a USB 2.0-compliant host

in order to function in high-speed mode (480Mbps data rate). If the Hub is

connected to a USB 1.1-compliant host, it will operate only in low-speed or

full-speed mode (1.5Mbps/12Mbps).

3. Windows will now detect your Hub and install the required driver support.

(The Windows “Install New Hardware Wizard” may prompt you to provide

your Windows Installation CD to complete the driver installation process).

Important Note: High-speed hub drivers are included with most USB 2.0 PCI

upgrade cards, and are pre-installed along with the PCI card drivers. If you

purchased an upgrade card prior to the release of high-speed hub support,

please check with your PCI card vendor for an updated USB 2.0 driver. The

Belkin USB 2.0 driver supports all competitive cards based on the NEC host

controller with the exception of Adaptec. The most recent Belkin driver is

available at www.belkin.com.

Installation

4. Plug the USB-A connector of the USB device, or an additional hub, into any

of the downstream ports of the Hub.

Important Note: When moving a device from one port on the Hub to another,

it may be necessary to reinstall the USB drivers for that device.

Installation

Table of contents

Languages:

Other Belkin Switch manuals

Belkin

Belkin F1DN104S User manual

Belkin

Belkin OmniView SOHO F1DS104J User manual

Belkin

Belkin F1DK102UUK User manual

Belkin

Belkin F5U302DNGL User manual

Belkin

Belkin F5D5141-5 User manual

Belkin

Belkin P73965 User manual

Belkin

Belkin OMNIVIEW P74696 User manual

Belkin

Belkin F1DF102P User manual

Belkin

Belkin F5U237VUK1 User manual

Belkin

Belkin F1DN104E User manual

Belkin

Belkin OmniView F1DJ102P-B User manual

Belkin

Belkin F1DN108K-3 User manual

Belkin

Belkin Switch User manual

Belkin

Belkin OmniView ENTERPRISE Quad-Bus Series User manual

Belkin

Belkin OmniView Dual-User PRO3 User manual

Belkin

Belkin OmniView F1D104 User manual

Belkin

Belkin F5U307-BRN User manual

Belkin

Belkin F1DN104K User manual

Belkin

Belkin F1DS102U - OmniView SOHO Series 2 Port KVM... User manual

Belkin

Belkin BusStation F5U100, BusStation F5U100-BLU,BusStation FW100-SLV, BusStation... User manual

Belkin

Belkin OmniView F1DP116G User manual

Belkin

Belkin BITRONICS P72655 User manual

Belkin

Belkin Omniview F1D201 User manual

Belkin

Belkin F5L009 - Network USB Hub User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual