Belkin F8Z065 User manual

User Manual

TuneCommand™ AV for iPod®

Introduction

Designed to let you roam and control your audio and video content from virtually

anywhere in your home, TuneCommand AV delivers the flexibility and convenience that

iPod users desire. Using wireless radio frequency technology, TuneCommand AV works

from up to 120 feet away from your stereo. Please review this User Manual carefully so

that you can be sure to get the most from your new Belkin product.

What’s in the Box

Introduction | 01

TuneCommand AV

Dock for iPod

TuneCommand AV

Remote Control

5 Insert Trays

AC Power Adapter

Multi-Clip

Surface-Mount

Hook

AV Cable

Lanyard

Battery

(Model CR 2032)

Lanyard

Adjuster

Legend

| 02

Battery-life and

range indicator

Skip backward

Shuffle button

Repeat button

Volume up

Play/pause

Skip forward

Volume down

Battery door

release button

(on the back)

Battery door

(on the bottom)

iPod connector

Signal indicator

Dock adapter

Stereo

AV out

Stereo

line out

Video out

S-video

Power in

DC 12V/0.8A

STEP 1 - TuneCommand AV Dock Setup

Place the TuneCommand AV Dock in

the desired location on your home

entertainment system.

Insert the barrel plug of the included AC

power adapter into the “power in” port on

the TuneCommand AV Dock. Plug the other

end of the AC power adapter into your wall

socket or surge protector.

Insert the 3.5mm end of the included AV

cable into the “Stereo AV Out” port on the

TuneCommand AV Dock. Plug the other end

of the AV cable into the input ports on the

back of your TV or stereo receiver.

NOTE:

For optional connectivity, you can

use your own 2-RCA-to-2-RCA and S-video

cables in lieu of the included AV cable.

Connecting through the RCA outputs

disables the volume-control functionality of

the Remote Control.

Select the appropriate insert tray for your

iPod and insert it into the top well of the

TuneCommand AV Dock (Fig. 1). Inserts for

the iPod video and iPod nano are included

with your purchase of the iPod.

Insert the iPod into the

TuneCommand AV Dock.

Operating Instructions

Operating Instructions | 03

Pull up here to remove the insert

iPod mini

4GB 6GB

iPod

20GB

U2 Special Edition

iPod

40GB

iPod with color display

20GB 30GB

U2 Special Edition

iPod with color display

40GB 60GB

















SNAP

Fig. 1

Operating Instructions

| 04

STEP 2 - TuneCommand AV Remote Control Setup

Turn the Remote Control so that the buttons are facing down. Press the release

button to open the battery tray, and gently pull it out of the housing until it stops

(Fig. 2). Please do not force the battery tray completely out of the housing.

Insert the battery with the (+) side facing up and push the battery cover back into

the Remote Control until the button snaps back into place and the battery tray is

securely shut.

Now press any of the Remote Control’s buttons for the TuneCommand AV Remote

Control and Dock to pair up. The green lights on the Dock and the Remote

Control blink when the first button-press command from the Remote Control

reaches the Dock correctly.

NOTE: If the battery is removed or replaced, you

will need to unplug the AC power adapter from the TuneCommand AV Dock

and plug it back in to reestablish connection with the Remote Control.

Fig. 2

You can now use your TuneCommand AV Remote Control to control the iPod’s play/

pause, skip forward, skip backward, and volume up/down functions. In addition, you

can conveniently control the shuffle and repeat functions, using the two small round

buttons. Each press of a button advances the setting to the next stage. When used with

the iPod video, nano, or photo, TuneCommand AV lets you scroll through your videos

(iPod video only), slideshows, or presentations, wirelessly!

NOTE:

• Slideshows must be started manually on the iPod before the TV will display them

When using the iPod video:

• Videos must be placed in a playlist in order to use the

Remote Control (play/pause, forward/back, etc.)

• The iPod video settings need to be switched to “TV Out > NTSC or PAL”

The shuffle key (

) advances the iPod’s shuffle settings as follows:

shuffle off > shuffle songs > shuffle albums.

The repeat button (

) advances the iPod’s repeat settings like this:

repeat off > repeat one > repeat all.

Follow the icons on the iPod’s screen to see the current settings, represented by small

icons on the upper right, below the battery-status indicator.

Operating Instructions | 05

Operating Instructions

LED Chart

Every time you push a button on the Remote Control, the green lights on the Remote

Control and the Dock will blink, indicating that the signal has been received correctly.

If the Remote Control and the Dock are too far apart to communicate, the light on the

Remote Control blinks orange (after a short delay) instead of green when you press a

button. The light on the Dock will not blink.

The Remote Control’s battery level is automatically checked after every button press.

If the battery level is low, the Remote Control’s red light will blink, following the green

or amber blink. If you see this happen, the low battery should be replaced soon with a

new one of the same type (CR 2032). Your TuneCommand AV will continue to function

normally until the battery is exhausted.

| 06

GREEN

ORANGE

The receiver receives the signal

Out of range

The battery is out

GREEN

Received the signal

Using the Multi-Clip | 07

Using the Multi-Clip

How to wear on a belt

Attaching the multi-clip to the Remote Control









Do not slide on





SNAP





Using the surface mount





The clip allows you to wear the Remote Control on a

belt, or around your neck with the lanyard.





Troubleshooting

| 08

• Dock is not powering on when plugged in.

Ensure the AC power adapter is completely plugged into the wall and “power in” port

on the TuneCommand AV Dock. Ensure your iPod is fully inserted into the connector

on the top of the Dock.

•

Remote Control is not powering on.

Ensure that the Remote Control’s battery is inserted correctly, with the (+) facing up,

that the battery tray is fully pushed in, and the release button is snapped

back into position.

•

After connecting the Dock and Remote Control, there is no sound.

- Select a song on the iPod and press “PLAY”.

- Make sure the audio cable is correctly plugged into the

TuneCommand AV Dock and the back of the entertainment system.

- When connected to a stereo system, ensure the

stereo system is set to the correct input channel.

- Make sure the iPod and stereo system are powered on.

- Turn up the volume using the TuneCommand AV Remote Control.

- Repeat STEP 1 and STEP 2 of the setup section.

•

The Remote Control does not work after replacing the battery.

After replacing the battery, unplug the power adapter from the TuneCommand AV

Dock and plug it back in to reestablish connection with the Remote Control.

•

The video is playing on my iPod but there is no video on the TV screen.

Make sure the iPod video setting is set to “TV Out > NTSC or PAL”.

Specifications | 09

Specifications

Operating Range: Up to 120 ft. (36.6m)

Transmission Method: Radio frequency

Frequency: 2.44GHz

Remote Battery: CR 2032 3V

Remote Dimensions: 3.5” x 1.5” x 0.5” (8.9cm x 3.8cm x 1.3cm)

(not including belt clip; 0.75” (1.9cm) max depth including belt clip)

Remote Weight (including battery): 0.8 oz. (22.6g)

Dock Dimensions: 3.5” x 3.5” x 1.00” (8.9cm x 8.9cm x 2.5cm)

Dock Weight: 3.4 oz. (96.4g)

Clip/Surface Mount/Lanyard: 0.47oz. (13.2g)

Table of contents

Other Belkin Docking Station manuals

Belkin

Belkin F5U273au User manual

Belkin

Belkin TuneDok User manual

Belkin

Belkin F8Z082-BLK - TuneTalk - Digital Player Voice Recording... User manual

Belkin

Belkin Dual Video Docking Stand User manual

Belkin

Belkin B2B043eaC00 User manual

Belkin

Belkin F5U120-PC User manual

Belkin

Belkin F8E467 User manual

Belkin

Belkin Thunderbolt 3 Dock Plus Instruction Manual

Belkin

Belkin F5U273 User manual

Belkin

Belkin TUNEBASE FM FOR IPOD User manual

Belkin

Belkin F5U216 User manual

Belkin

Belkin F5X016 - Home Kit For Xpress User manual

Belkin

Belkin Valet F8J183 User manual

Belkin

Belkin F8Z901 User manual

Belkin

Belkin TuneSync F5U255ea User manual

Belkin

Belkin Thunderbolt 3 Dock Pro Instruction Manual

Belkin

Belkin Valet F8J183 Instruction Manual

Belkin

Belkin F8E461 User manual

Belkin

Belkin F4U093 User manual

Belkin

Belkin F4U095 Assembly instructions

Belkin

Belkin F8E461 User manual

Belkin

Belkin F5U273ea User manual

Belkin

Belkin F8J088 User manual

Popular Docking Station manuals by other brands

Sony

Sony Dream Machine XDR-DS12iP user manual

Acer

Acer USB Type-C Dock II user manual

ATEN

ATEN UC-2000 user manual

Xcellon

Xcellon HDD-202 user manual

Dok

Dok CR09 user guide

Philips

Philips BTM630/12 quick start guide

IOGear

IOGear Travel Pro GUD3C09 quick start guide

RKI

RKI SDM-E2 Operator's manual

iHome

iHome iP15 instruction manual

VITURE ONE

VITURE ONE MOBILE DOCK quick start guide

Lindy

Lindy 42984 user manual

CipherLab

CipherLab 8001 quick guide

Pyle

Pyle PIPDSP2 owner's manual

Avol

Avol AS2350 user manual

Datalogic

Datalogic JoyaTouch quick start guide

Philips

Philips DC190/79 user manual

Targus

Targus DOCK315EUZ user guide

Akasa

Akasa DuoDockX3 AK-DK08U3-BK user manual