Beijer Electronics IFC MC User manual
IFC MC
Manual
MA00281C 2001-12 English, Svenska
Foreword
Beijer Electronics
Manual IFC MC
Foreword
This manual describes the installation and functions of the memory expansion
card IFC MC.
The expansion card is used to connect a PCMCIA flash memory card to opera-
tor terminals with expansion slots.
IFC MC supports the flash memory cards 4MB (SM9AMD4M002) and
8 MB (SM9AMD8M002) from SMART Modular Technologies.
For information about the flash memory card, please contact the dealer.
Besides this manual, the manual for the operator terminals and the
programming tool for the operator terminals is also available.
Beijer Electronics AB, MA00281C, 2001-12
All examples in this manual are used solely to promote understanding of how the equipment works and its
operation. Beijer Electronics AB takes no responsibility if these examples are used in real applications.
Because of the great many application areas for this equipment, the user himself must acquire the
appropriate knowledge needed to use the equipment correctly for particular applications.
Beijer Electronics AB absolves itself of all responsibilities for damage and injuries that may occur during
installation or use of this equipment.
Beijer Electronics AB absolves itself of all responsibilities for any type of modification made to the
equipment.
Beijer Electronics AB absolves itself of all responsibilities for damage caused to its products by other brands
of equipment linked to them.
Foreword
Beijer Electronics
Please fill this form out with any suggestions regarding the manual.
This page, or a copy of it, can be sent to us at the addresses below.
Name ....................................................................................
Company....................................................................................
Address ....................................................................................
City, Zip code.............................................................................
Country ....................................................................................
Telephone...............................Fax...............................................
E-mail ....................................................................................
Please fax this page to the Marketing epartment,
Beijer Electronics AB at +46-40-93 23 01,
or send it by conventional mail to
The Marketing epartment, Beijer Electronics AB
Box 426, SE-201 24 MALMÖ, Sweden.
Comments can also be sent to manual@beijer.se.
Comments regarding MA00281C Page
Safety precautions
Beijer Electronics
Safet precautions
General
– Check the delivery for transport damage. If damage is found, advise the
supplier.
– The product fulfils the requirements of article 4 of EMC directive
89/336/EEC.
– Do not use the product in an explosive environment.
– Modifications, changes and additions to the product are forbidden.
– Use only spare parts approved by Beijer Electronics AB.
– Read the user instructions carefully before use.
– The equipment should be operated by qualified personnel only.
At installation
– The product is constructed for stationary installation.
– Install the product according to the accompanying installation instructions.
– The product must be grounded according to the accompanying installation
instructions.
– The equipment must be installed by qualified personnel.
– Separate cables for high voltage, signals and supply.
– The product should not be mounted in direct sunlight.
In use
– Keep the equipment clean.
– Emergency stop and other safety functions should not be controlled from the
terminal.
– Do not touch the keys, displays, etc. with sharp objects.
Safety precautions
Beijer Electronics
Service and maintenance
–The agreed guarantee applies.
–Clean the display and face with a soft cloth and mild detergent.
–Repairs should be made by qualified personnel.
At disassembl and scrapping
–Local regulations apply concerning recycling of products or parts.
–Please note that the electrolyte condenser and display contain hazardous
substances.
Contents
Beijer Electronics
Contents
1Installation................................................................................................8
1.1 Installation of one expansion card................................................8
1.2 Installation of two expansion cards.............................................10
2 Settings in the programming tool...........................................................12
2.1 Define slot .................................................................................12
2.2 Transfer the settings...................................................................15
3 Functions for the memory card ..............................................................16
3.1 Backup.......................................................................................16
3.2 Memory expansion ....................................................................17
Contents
Beijer Electronics
Installation
Beijer Electronics 8
1 Installation
When the operator terminal is started with a formatted IFC MC card installed,
the system detects if the memory card is formatted as a memory expansion card
or as a backup card. The backup function makes it easy to, for example, copy
projects between different terminals.
The system program (operating system/firmware) in the operator terminals
must be of the same version if IFC MC is used as a backup card to copy projects
or files between different terminals.
The memory card can only be read and written to by the terminal, and not by a
personal computer.
This chapter describes how to mount the memory card in the terminal.
1.1 Installation of one expansion card
Perform the following steps to mount the IFC MC expansion card:
1. Switch the terminal power off.
2. Make sure that the ESD protection is good.
3. Remove the cover plate on the rear of the terminal, and the two expansion
plates on the short side. In terminals equipped with two expansion slots, the
slots are called Slot 1 and Slot 2. In terminals with one expansion slot, it is
called Slot 1.
Slot 1
Slot 2
Installation
9Beijer Electronics
4. Put the jumper J1 on the expansion card in the position SLOT 1 if the
expansion card is mounted in Slot 1, and in position SLOT 2 if the card is
mounted in Slot 2.
5. Mount the expansion cables with the components of the expansion card
placed upwards. One of the expansion cables is mounted between X1 on the
CPU card and X1 on the expansion card, and the other cable between X2
on the CPU card and X2 on the expansion card.
6. Fasten the card with the spacers or the screws. Use the screws if the expan-
sion card is mounted in Slot 1, and the spacers if the card is mounted in
Slot 2.
7. Check that the expansion cable is correctly mounted.
8. Mount the cover plates.
J1
X1
X1
X2
X2
Installation
Beijer Electronics 10
1.2 Installation of two expansion cards
Two expansion cards can be mounted in some terminals. They are mounted in
parallel to the connector on the CPU card in the terminal. Two expansion cards
can be connected via one expansion cable since there is a parallel contact on the
cable. The connector in the middle is used for the expansion card placed in Slot
1 and the end connector is used for the expansion card placed in Slot 2. If only
one card is used either connector can be used.
The connector X1 on the expansion card in Slot 2 is connected to the connector
X1 and the CPU card in the terminal via the X1 connector on the expansion
card in Slot 1. If the X2 connector on the CPU card in the terminal is used by
any or both cards, this connector is connected to the X2 connector on the
expansion card.
When two expansion cards are mounted in the same terminal the card in Slot 1
is mounted with the distances and the card in Slot 2 with the screws in the dis-
tances.
Note!
Only one IFC MC can be used in the terminal.
X1
X2
X1
X1
Card in
Slot 2
Card in
Slot 1
X2
Other manuals for IFC MC
1
Table of contents
Languages:
Other Beijer Electronics Control Panel manuals
Beijer Electronics
Beijer Electronics iX T15B User manual
Beijer Electronics
Beijer Electronics C2 base User manual
Beijer Electronics
Beijer Electronics EPC TA100 AM User manual
Beijer Electronics
Beijer Electronics M70 User manual
Beijer Electronics
Beijer Electronics QTERM-IV User manual
Beijer Electronics
Beijer Electronics X2 web User manual
Beijer Electronics
Beijer Electronics X2 control User manual
Beijer Electronics
Beijer Electronics T15B User manual
Beijer Electronics
Beijer Electronics iX Panel T60 User manual
Beijer Electronics
Beijer Electronics iX Panel TA70 User manual
