Behringer Eurolive B205D Reference manual

985-40000-00454 Rev.A

2014-04-08 page 1 of 4

Preparation

The following tools and parts are required in order to perform the procedures described in this service bulletin.

IRIS Repair Code

for Warranty Claim

1511

Warning: Follow all standard safety precautions when performing this procedure. Failure to follow instructions may lead

to permanent injury or death.

Caution: Follow all standard ESD precautions when performing this procedure. Failure to follow instructions may cause

damage to the unit being repaired.

Issue No power or no output, loud buzzing sound, burning smell or complaints of smoke

Remedy Replace 15V voltage regulators IC1 and IC2, and improve their heatsinking

Replace any other components that have failed

Action Rework all units manufactured prior to date code 1402

Technician Only authorized service technicians shall perform this procedure

Tools Required

Crosshead screwdriver, soldering iron, approved thermal grease

Parts Required

Qty Description Ref Designator

1 IC 7815 voltage regulator, TO220 IC1

1 IC 7915 voltage regulator, TO220 IC2

2 Insulator F89-07019-00144, 2.03mm thick, TO220 for IC1 and IC2

1 Metal clip A65-00200-04931 for IC1 and IC2

1 Screw, M3, 8mm, at head, crosshead, silver/zinc for metal clip

1 Nut with star lock washer, M3, 3.2 mm, hex for metal clip

Ultra-Compact 150-Watt PA/Monitor

Speaker System

Loudspeaker Systems

EUROLIVE

B205D

ServiceBulletin

page 2 of 4

Loudspeaker Systems

EUROLIVE

B205D

Remove the 4 crosshead screws and pull out the

power supply/amplier assembly. Disconnect

the wiring and place the assembly on your

work bench.

Remove the 7 crosshead screws from the rear of

the cabinet as shown, and separate the front and

rear sections of the cabinet. Take care as they

are connected with cables, and be careful with

the gasket.

Remove the 4 nuts and bolts and pull out the mic

stand holder from the bottom of the rear cabinet.

Disconnect the power cord and all other

connections to the unit under repair.

Follow all steps in the order in which they

are presented.

Procedure

Risk of electrical shock due to high voltage

discharge, even when the unit is o.

Ensure that the power supply capacitors are fully

discharged before proceeding.

page 3 of 4

Loudspeaker Systems

EUROLIVE

B205D

Locate and remove IC1 and IC2. Inspect the circuit

board and components for any heat damage, and

replace as needed.

Remove the Main PCB from its metal enclosure. Carefully prepare the legs of the new voltage

regulators, to the dimensions shown in

this drawing.

Insert the new IC1 and IC2 in position, so they are

the same height as the nearby diodes D5 and D6,

then solder them in place.

4.0 mm

9.0 mm

(this is the most

important dimension)

Bend where the legs change width

3.5 mm

6.0 mm

MUSIC Group accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.

Technical specications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,

Condential, for internal use only. Not to be reproduced.

Loudspeaker Systems

EUROLIVE

B205D

Spread thermal grease on the backs of IC1, IC2, D5,

and D6. Carefully reinstall the PCB assembly back

into its metal enclosure.

Reinstall the heatsink clip to diodes D5 and D6,

and tighten the screws.

Install the new heatsink clip to cover IC1 and IC2.

Tighten the screw and nut to securely hold the ICs

against the heatsink.

Reassembly is the reverse of disassembly. Make

sure all connections and screws are secure.

Perform a functional test and safety test to verify

the unit is working correctly.

Make sure all insulators are in place,

including two new ones for IC1 and IC2.

Other manuals for Eurolive B205D

Other Behringer Speakers System manuals

Behringer

Behringer Eurolive B415DSP User manual

Behringer

Behringer Eurolive B212A User manual

Behringer

Behringer Eurolive B212A User manual

Behringer

Behringer Eurolive B1220 Pro User manual

Behringer

Behringer Eurolive B207 MP3 User manual

Behringer

Behringer Eurolive B207 MP3 User manual

Behringer

Behringer Eurolive B110D User manual

Behringer

Behringer EUROLIVE B215XL User manual

Behringer

Behringer CE500D User manual

Behringer

Behringer EUROLIVE F1320D User manual

Behringer

Behringer CL3596 User manual

Behringer

Behringer Eurolive B412DSP User manual

Behringer

Behringer Eurolive B415DSP User manual

Behringer

Behringer CL3596 User manual

Behringer

Behringer Ultrabass BA210 User manual

Behringer

Behringer Eurolive VP1520D User manual

Behringer

Behringer EUROLIVE B212XL-WH User manual

Behringer

Behringer Europort MPA40BT User manual

Behringer

Behringer Eurolive B205D User manual

Behringer

Behringer EUROLIVE B215XL User manual

Behringer

Behringer EUROLIVE B115D User manual

Behringer

Behringer Eurolive B207 MP3 User manual

Behringer

Behringer EUROLIVE PROFESSIONAL B2520 PRO User manual

Behringer

Behringer EUROLIVE B615D User manual

Popular Speakers System manuals by other brands

JVC

JVC CA-MXK5R instructions

LG NB4532B owner's manual

JVC

JVC CA-FSH100 instructions

5Core

5Core Pro Series Operation manual

EAW

EAW MQV1394e Specifications

Lynx

Lynx GXR-LA10A user manual

iLive

iLive ITB066B user guide

RDX

RDX QuickStation 4 product manual

Electro-Voice

Electro-Voice S-122 Specifications

Sven

Sven SPS-619 GOLD Operation manual

Pioneer

Pioneer CS-7070 instruction manual

EAW

EAW UB82e Technical specifications

Sondpex

Sondpex Active Speaker System and Digital Music... User manual and installation instructions

JVC

JVC NX-PN7 instructions

Marshall Amplification

Marshall Amplification AR-DM61-BT user manual

Yamaha

Yamaha NX-A01 - Speaker Sys Product bulletin

SE Audiotechnik

SE Audiotechnik I-LINE manual

Gemini

Gemini WRX-843 Series user manual