Beghelli LOGICA User manual

LOGICA FM CONTROL UNIT BY BEGHELLI

code 21102

Co trol U it for the ce tralised co trol of ormal

a d emerge cy lighti g systems

NSTALLAT ON

AND OPERAT NG NSTRUCT ONS

ABLE OF CON EN S

•

•WHA IS HE LOGICA FM CON ROL UNI BY BEGHELLI p.3

•

•FUNC IONS p.3

System Monitoring p.3

System Control p.3

Keeping a Logbook p.3

•

•INS ALLA ION p.4

Use and termination of RS 485 lines p.4

Operations required to make the Logica FM Control Unit Operational p.5

Keyboard and Display Functions p.5

Date and Time Settings p.6

Searching for Logica FM Control Units (Node searching) p.7

Scheduling Functional and Autonomy Tests p.8

•

•GROUPS p.10

Assigning a Luminaire to a Group p.10

•

•MENU p.10

Luminaires Menu p.10

Maintenance Menu p.10

Manual Test p.10

Emergency p.11

Management Test p.12

Control Unit Management p.13

Date & Time Changes p.13

Printing p.13

Language p.14

Outputs OUT1 - OUT2 - OUT3 on/off p.14

Outputs OUT1 - OUT2 - OUT3 Active Open/Closed p.14

Configuration p.15

•

•ECHNICAL FEA URES p.16

•

•WARNINGS - WARRAN Y p.16

The Logica FM Control Unit by Beghelli (code 21102) is a device designed for the centralised con-

trol of normal and emergency lighting systems: it controls and supervises up to 992 Logica FM

series luminaires via radio. The Logica FM Control Unit by Beghelli consists of:

- Keyboard + display for user operations;

- Radio interface on the 2.4GHZ-2.4835GHz band, (code 12130) DSSS “Spread Spectrum” modu-

lation for connection to Logica FM series luminaires;

- RS485 interface for direct connection to a PC.

- RS232 interface for connection to the Logica D N RS232 serial printer by Beghelli (code

3284).

- USB interface for software updates, back-up and restoring configuration data.

- ntegrated 4G LTE modem for remote connections via nternet.

- Ethernet interface for LAN networks.

- Wi-Fi interface for PC connection.

To control the system from a remote PC, you need to get the Logica Visual software (code

12139) or the SD Manager software (code 20109).

The Logica FM Control Unit performs the following tasks:

SYS EM MONI ORING

The Logica FM Control Unit continuously monitors the luminaires connected to it and it detects

and signals any malfunctions.

SYS EM CON ROL

The Logica FM Control Unit allows you to adjust the brightness of luminaires, to perform

Functional and Autonomy Tests on emergency luminaires in the system, to schedule tests

(date, time and time intervals) etc.

KEEPING A LOGBOOK

The Logica FM Control Unit tracks test outcomes and, in general, any relevant operation in the

system. f a printer is available (code 3284), this information can be regularly printed on paper.

f a PC connection is available, this information can be sent and saved on a computer.

WHA IS HE LOGICA FM CON ROL UNI BY BEGHELLI

FUNC IONS

INS ALLA ION

Use the layout below for reference to connect the Logica FM Control Unit to the Logica FM radio

circuit and to the optional D N printer (RS232 bus).

The connection with the system, using the Logica Visual or the SD Manager software, can be

established through different channels:

- RS485-A;

- Ethernet;

- Modem 4G LTE integrato;

- Wifi

OkEsc

OUTPUT INPUT

Antenna

GSM

60425

LOGICA FM CONTROL UNIT

CODE 21102

RADIO CIRCUIT

LOGICA FM

CODE 1213 DIN PRINTER

CODE - 3284

DTR ( ELLOW)

TX (BLUE)

RX (GRE )

GND (BLACK)

USE AND ERMINA ION OF RS 485 LINES

The control unit is equipped with 2 independent RS 485 lines (RS485_A and RS485_B) both

with adaptation of the line impedance by inserting 2 riders at 2.54 pitch.

Line adaptation is necessary when the control unit is located as a "terminal" element of BUS

485 (start or end of the route).

To adapt the RS485_A line, insert the Jumper in connectors J22 and J23

To adapt the RS485_B line, insert the Jumper in connectors J20 and J21

COM UX

-UX

RETE RADIO

RS485_A

OUT3

5V IN

Reset

BOOT

00 - SD

01 - eMMC

10 - NAND

Term. 485

J20

J21

J23

J22

OPERA IONS REQUIRED O MAKE HE LOGICA FM

CON ROL UNI OPERA IONAL

KEYBOARD AND DISPLAY FUNC IONS

Keys allow you to navigate through pages on screen to view information and select operating

modes.

The three main menus are LUM NA RES, MA NTENANCE AND STATUS;

- to move from one menu to another, use the "DOWN" Cand "UP" Dkeys

- to enter the menu and go deeper, use the "OK" Bkey

- to return to a higher menu level, use the "ESC” Akey

Other functions of the keys are listed below:

Use the “DOWN” Cand “UP” Dkeys to change a value (for example, in the Date and Time

Settings menu, with the hour indication “08” flashing, press Dto increase the value to “09”,

press Cto decrease the value to “07”) and press the “OK” Bkey to confirm the entered

value (by reference to the example given at the previous point: if, after changing the hours value

to “07”, you press the B key, the value will be stored on the Control Unit).

Note: f the panel is brand-new or if its memory has been reset (the Control Unit has no lumi-

naires stored), some menus will not be visible.

IME AND DA E SE INGS

At the first start up, the system displays the LUM NA -

RES menu: L MINAIRES

Press the keys shown on the right in sequence to go

to the menu for time setting:

CMAINTENANCE

BMaintenance CTRL

NIT MGT.

Dx2

Ctrl nit Mgt.

CHANGE DATE-TIME

Press Bto enter the menu that shows the date cur-

rently set on the Control Unit and the day indication

will be flashing. Press Duntil the day of interest is

displayed, then press Bto confirm. Now the month

indication will start flashing.

To change it, follow the same procedure as for setting

the day.

Change

date-time

01-01-2005 00:00

Apply the same method to set the year, hour and minu-

tes. Press Bto confirm the value set for minutes;

now the display will show "DONE".

15-06-2006 15:45

DONE

SEARCHING FOR FM LOGICA LUMINAIRES (NODE SEARCHING)

Note: nstall the Control Unit and activate the wizard for luminaire searching before starting to

install the luminaires. By doing so, whenever a luminaire is powered on, the Logica FM Control

Unit will detect it and will display a prompt. At the end of installation, the counter on the Control

Unit display should report the exact number of installed luminaires (if not, check for turned off

or faulty luminaires).

Press Bto run the search

Config. in pro-

gress CONTIN O S

As soon as the Control Unit acquires the first luminaire,

the display will show "NORMAL SEARCH", which will

then be replaced by the following indications:

- 008(008): number of luminaires found (total number

of luminaires stored on the Control Unit)

Config. in

progress 008

(008)

When the total number of luminaires stored on the

Control Unit reaches the number of luminaires installed

in the system, press Aand this screen will appear

showing how many luminaires have been found and, in

parentheses, the total number of luminaires stored on

the Control Unit.

COMPLETED

FO ND 098(098)

Assuming you start from the LUM NA RES menu: press

the keys shown on the right in sequence to go to the

luminaire searching menu (NODE SEARCH NG).

L MINAIRES

CMAINTENANCE

BMaintenance

CTRL NIT MGT

DMaintenance

CONFIG RATION

BConfiguration

FIND NODES CONT.

SCHEDULING FUNC IONAL AND

AU ONOMY ES S

Functional and Autonomy Tests check the emergency luminaires. A Functional Test consists in

turning on a luminaire for about 30 seconds during which time the luminaire light source and

battery efficiency is checked; an Autonomy Test consists in turning on a luminaire over a lon-

ger time at the end of which the battery efficiency is checked. f a test reveals a luminaire is faulty,

this information will be transferred from the luminaire to the Logica FM Control Unit: an error mes-

sage will be displayed on screen and the error will be recorded in the Logbook.

For a correct operation of the system, the following must be set:

- Date and time of the next Functional Test;

- Date and time of the next Autonomy Test;

- Time interval between repeated Functional Tests;

- Time interval between repeated Autonomy Tests.

Example of how to set the date and time for the next Functional Test:

Now press Bto show the date of the next Functional

Test currently stored on the Control Unit.

To set the time of the test, proceed as shown in section

"Date and Time Settings".

Next Func Test

31-12-2099 00:00

Assuming you start from the LUM NA RES menu: press

the keys shown on the right in sequence to go to the

date&time settings menu for the next Functional Test.

("x 2" means you have to press the key twice)

L MINAIRES

CMAINTENANCE

BMaintenance

MAN AL TEST

C x2 Maintenance

MANAGEMENT TEST

BAll

NEXT F NC TEST

Luminaires connected to each Logica Control Unit by Beghelli can be divided into groups to

perform separate operations on system sections. Each luminaire can belong to a group, multi-

ple groups or no group. The total number of groups available is 16.

ASSIGNING A LUMINAIRE O A GROUP

GROUPS

Press Band the following screen will appear on the

display. The line below the name of the luminaire indi-

cates whether it belongs to one of the sixteen groups or

not: the first digit on the left refers to group 1, the last

digit on the right refers to group 16:

- 0: the luminaire does not belong to the group

- 1: the luminaire belongs to the group

Before the first configuration, the row has sixteen '0',

i.e. the luminaire F12345 does not belong to any group;

the cursor will flash on the last zero to the left that cor-

responds to group 1.

Press:

-Bto move to the next group

-Ato move to the previous group

-Dto include the luminaire in the group

-Cto exclude the luminaire from the group

SA/PS F12345

0000000000000000

Assuming you start from the LUM NA RES menu: press

the keys shown on the right in sequence to go to the

menu to set the group of the first luminaire on the list

("x 4" means you have to press the key four times)

L MINAIRES

CMAINTENANCE

BMaintenance

MAN AL TEST

C x4 Maintenance GRO P

MANAGEMENT

BGroup Management

ALL

CGroup Management

SA/PS F12345

The system is organised in menus that allow you to access varied features of the system: turn

luminaires on and off, perform Functional and Autonomy Tests, review information on mal-

functions etc.

To understand how to navigate among screens using the keys, see section "Keyboard and

Display Functions".

Most operations available can be applied to the entire system or to parts of it, as shown in the

following table:

There are 3 menus: LUM NA RES, MA NTENANCE AND STATUS.

LUMINAIRES MENU

Use this menu to adjust the brightness of the luminaires:

MAIN ENANCE MENU

MANUAL ES

Functional and Autonomy Tests check the emergency luminaires. A Functional Test consists in

turning on a luminaire for about 30 seconds during which time the luminaire tube and battery

efficiency is checked; an Autonomy Test consists in turning on a luminaire over a longer time

at the end of which the battery efficiency is checked.

Normally, Functional and Autonomy Tests are run automatically at regular intervals according

to the schedule set by the user (see Scheduling Functional and Autonomy Tests"), but it is also

possible to perform a Functional Test or an Autonomy Test directly from the keyboard: Manual

Test. Manual Tests stop at the end of the set time or by sending a stop test command.

For: go to (menu):

all luminaires in the system ALL

a single luminaire (e.g. luminaire LOG CA SA

code F01234) SA/PS F01234

all luminaires in Group yy GROUP 03

go to (menu):

for a maximum brightness level ON (MAX)

to turn them off TO TURN THEM OFF

for an intermediate brightness level (e.g.

level 5) D MMER STEP 05

Other manuals for LOGICA

This manual suits for next models

Table of contents

Other Beghelli Control Unit manuals

Beghelli

Beghelli LOGICA SUPERVISOR 12131C User manual

Beghelli

Beghelli LOGICA Technical manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual