Beef Eater Discovery 1100e User instructions

This manual suits for next models

2

Table of contents

Other Beef Eater Grill manuals

Beef Eater

Beef Eater 77440 Manual

Beef Eater

Beef Eater Signature Trolley User manual

Beef Eater

Beef Eater SL4000s Series User manual

Beef Eater

Beef Eater INTEGRATED Series User manual

Beef Eater

Beef Eater DISCOVERY 1100S User manual

Beef Eater

Beef Eater SIGNATURE 2000ES MOBILE Series User manual

Beef Eater

Beef Eater DISCOVERY 1000 Series User manual

Beef Eater

Beef Eater DISCOVERY 1000ES Series User manual

Beef Eater

Beef Eater signature plus User manual

Beef Eater

Beef Eater Bugg STAND User manual

Beef Eater

Beef Eater 1500 Series User manual

Beef Eater

Beef Eater Signature Series User manual

Beef Eater

Beef Eater 1600 Series User manual

Beef Eater

Beef Eater Discovery Series User manual

Beef Eater

Beef Eater Discovery 1100 Series User manual

Beef Eater

Beef Eater 1500 Series User manual

Beef Eater

Beef Eater SL4000s Series User manual

Beef Eater

Beef Eater 1600 Series User manual

Beef Eater

Beef Eater Discovery 1100 Series User manual

Beef Eater

Beef Eater Discovery Series User manual

Beef Eater

Beef Eater 1100 series User manual

Beef Eater

Beef Eater BSW318SAEU User manual

Beef Eater

Beef Eater SL4000S SERIES User manual

Beef Eater

Beef Eater DISCOVERY 1000E SERIES User manual

Popular Grill manuals by other brands

Orbegozo

Orbegozo GR 2300 instruction manual

bora

bora PT11 Operating and installation instructions

Klarstein

Klarstein 10031664 manual

Garland

Garland MWE3W Installation and operation manual

Char-Broil

Char-Broil 463722714 Product guide

Nexgrill

Nexgrill 720-0830HK Operating instruction

Kenmore

Kenmore 415.16123800 Use and care guide

Camp Chef

Camp Chef PG24CLAU Warning & instruction booklet

Tucker Barbecues

Tucker Barbecues GTR Series Assembly, installation and operating instructions

Monogram

Monogram ZGG540NCP1SS owner's manual

Equipex

Equipex Sodir Savoy Operation manual

Gaggenau

Gaggenau VR 414 610 use and care manual

Miele

Miele KM 408-1 operating instructions

George Foreman

George Foreman GGR50B owner's manual

AOG

AOG T series quick start guide

Gorenje

Gorenje TG2000CB Instruction manua

Weber

Weber Genesis Silver-B Permamount NG 051701 owner's guide

Glen

Glen SA 3037 user guide

1100

1100s, 1100e, 1100

Assembly and Operating Instructions

FOR OUTDOOR USE ONLY

2

Safety Warning

Failure to follow these instructions and observe the warnings provided in this operations

manual could result in fire, explosion or burn hazard, which could cause property damage,

personal injury or death.

Gas vapour is highly explosive and can cause serious bodily injury or damage to property if allowed to

accumulate in a confined space and ignited.

This appliance must not be installed under or on any combustible material. Minimum clearance from

combustible materials to all sides of the appliance is 450mm (18”).

These instructions must be left with the owner.

NOTE

1. Do not use gas other than the type specified on the Data Plate

2. The appliance is designed for use by adults, keep children away from the 1100Series BBQ at all

times.

3. Use only on a flat, level, stable non-combustible surface. Do not use this appliance on any surface

that can burn or melt.

4. When in use, gas cylinder should be kept at designated mountings on 1100Series BBQ, and supply

hoses kept away from any hot surfaces.

5. To prevent accidental fires, before using the appliance ensure that there is no apparent damage to

hose and regulator and all joint connections are in good order and not leaking.

6. Before every use of the appliance, use a soapy water solution on all joints in order to check for

leaks. If bubbles appear, it indicates that there is a leak and the appliance must not be used.

7. LPG cylinder, regulator and hose must comply with national standards.

8. Do not move or attempt to move the appliance while in operation.

9. Do not operate this appliance before leak checking hoses and gas cylinder connection.

I MPORTANT:

• BeefEater Barbecues are approved for OUTDOOR

USE ONLY and must not be used in a building,

garage or any other enclosed area.

• BeefEater Barbecues must not be used inside

recreational vehicles or boats.

• Read instructions thoroughly before operating this

Barbecue.

• Save this manual for future reference.

• Always use the Barbecue on a flat, level surface.

• Some foods produce flammable fats and juices.

Regular cleaning is essential.

• Attend an operating barbecue at all times. Damage

caused by fat & grease fires is not covered by

warranty.

• When not in use keep Barbecue dry and covered.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open hood.

1. If odour continues, immediately call

your gas supplier or your fire

department.

FOR YOUR SAFETY

1. Do not store or use gasoline or other

flammable vapours or liquids in the

vicinity of this or any other appliance.

2. An LPG cylinder not connected for use

shall not be stored in the vicinity of

this or any other appliance.

To the installer:

•For fixed installations, refer also to the requirements of AS5601/AG601, local authority, gas,

electricity, and any other relevant statutory regulations.

•For fix installations, refer to AS 5601/AG 601 for pipe sizing details.

•Consult other trades. Where required, consult a bricklayer or an electrician for parts of the

installation that could have an effect on these areas.

•Allow a 20mm gap from back of barbecue body for ventilation and air access.

•Test appliance for correct operation before leaving, and instruct user on its use.

•If correct operation cannot be achieved, disconnect barbecue from gas supply, and contact your

nearest BeefEater dealer.

•Please only use BeefEater supplied hose(s) to connect this appliance. Natural Gas conversion kits

are available from your nearest BeefEater dealer. Leave these instructions w ith custom er

3

DO NOT

• Lean over barbecue when lighting.

• Leave cooking food unattended.

• Delay lighting burners after turning gas

on.

• Spray or store aerosols in vicinity of

barbecue whilst in operation.

• Store combustible materials, gasoline or

flammable liquids or vapours within

450mm (18”) of barbecue.

• Use caustic based cleaning agents on the

barbecue.

• Operate barbecue with any cover on.

• Use plastic or glass utensils on the

barbecue.

• Operate barbecue in strong winds.

• Attempt to dismantle control valves.

• Attempt to dismantle or adjust regulator.

• Test for gas leaks with a naked flame.

• Store gas cylinder indoors, or in any

enclosed area.

• Lay the gas cylinder down. Always keep

it upright.

• Use barbecue indoors.

• Expose hose to direct sunlight.

• Modify the construction of this appliance

or the size of any burner or valve orifice.

• Move the appliance during use.

• Obstruct any ventilation of barbecue or

the cylinder.

• Allow the flexible gas supply hose or any

electrical cord to come in contact with hot

surface of the appliance.

• Allow children to operate this appliance.

• Use charcoal or any other solid fuel in

this appliance.

• Disconnect any gas fittings while the

appliance is operating.

• Use a rusty or dented gas cylinder or

cylinder with a damaged gas valve.

• Fill the gas cylinder beyond 80%

capacity.

• Touch some accessible parts, other than

the ones meant for handling. They may be

hot.

DO

• Spanner tighten all gas fittings as per

instructions.

• Check all gas hoses and line connections for

damage, cuts or cracks each time the appliance

is about to be used.

• Always leak test with a solution of soapy

water.

• Check main opening, throat and venturi to

each burner and pilot flame tube regularly for

insect nests (eg. wasp, ants or spiders). Nests

are dangerous and must be cleaned out

thoroughly.

• Visually check burner flames to confirm

lighting.

• Use your barbecue only on a level surface.

• Attend barbecue whilst cooking food.

• Preheat the barbecue for up to 10 minutes.

• After cooking turn barbecue to high for up to

10 minutes to burn off excess grease.

• Let the barbecue cool before replacing any lid

or cover.

• Regularly replace foil material in grease/drip

tray.

• Keep children away from barbecue at all

times.

• Have the gas cylinder filled by an authorised

LPG supplier.

• Refer to this instruction manual if in doubt

concerning assembly, installation, or operation.

• Use protective gloves when handling hot

components.

• Close the gas cylinder valve after each use.

• Clean the grease/drip tray regularly and

clean the appliance at least twice annually.

• Always remove any lid or cover off the

appliance before lighting.

• Carefully follow the instructions relating to

the hose/regulator connection.

• Keep the barbecue area free from

combustible materials, gasoline, flammable

liquids or vapours.



Should the appliance go out for any reason, turn off all control knobs and

the cylinder gas valve. Wait 5 minutes before attempting to relight the

appliance.

If a grease or fat fire should occur, immediately turn off all control knobs

and the gas cylinder valve until the fire is out. Remove all food from the

appliance.

A leak test must be carried out prior to using the appliance for the first time

and whenever the gas cylinder is refilled or whenever the gas hose and

regulator have been disconnected from the gas cylinder or appliance.

4

Gas Cylinder Safety I nformation

Gas cylinders must be stored outdoors, out of reach of children and must not be stored in a

building, garage or any other enclosed area.

This appliance is designed to be used with a gas cylinder not exceeding 9KG (20lbs) capacity.

The Gas cylinder must be constructed and marked in accordance with specifications for LP Gas

Cylinders.

The gas cylinder supply valve must be turned off when the appliance is not in use.

The gas cylinder used must incorporate a safety collar to protect the valve assembly.

The gas cylinder must always be kept and used in the upright position.

I mportant:

When disconnecting and removing the gas cylinder for the purpose of refilling, always observe the

following procedure:

Ensure that all gas control valves on the appliance and the gas cylinder are turned off before

disconnecting the gas line from the cylinder.

Do not smoke or use a naked flame near the appliance or gas cylinder while disconnecting the gas

line between the appliance and gas cylinder.

Remove the gas cylinder from the enclosure before disconnecting the gas line from the appliance.

Tighten all connections before placing the gas cylinder back in its enclosure.

The Gas Leak Testing Procedure should be conducted every time the gas cylinder is refilled and

reconnected to the appliance – before using the appliance.

Regulator Connection

1. Check that all control knobs are in the ‘Off’ position.

2. Make sure the cylinder valve is off by turning the valve knob all the way clockwise.

3. Remove the protective cap from the cylinder if present.

4. Make connection as described in figures 1 and 2.

5. Leak-test the connection with a soapy water solution. (See Gas Leak Testing Procedure).

Hose and regulator replacement must be a genuine part specified for this appliance, and can be

obtained at your nearest BeefEater stockist.

Gas Leak Test Procedure

Use the following procedure to check for gas leaks.

Never use a naked flame to check for gas leaks.

1. In a small container, mix up a solution of water and detergent or soap. Mix the solution well.

2. Make sure that the gas supply valve on the gas cylinder is turned on.

3. Make sure that the gas control valves on the appliance are all turned off.

4. Using a brush or spray bottle apply the solution to the gas line and each join in the gas line. See Fig 3.

5. Bubbling of the solution will indicate that there is a leak present.

6. Re-tighten or re-seal any joints that are leaking.

7. If a leak persists then contact your distributor or the manufacturer for assistance.

5

Know your BBQ:

1. BBQ Body

2. Hood

3. Cooking Grill

4. Cooking Plate

5. Side Burner

6. W arming Rack

7. Rotisserie Bracket*

8. Cabinet Trolley* *

9. Vaporizers

10. Burner

11. Gas Cylinder Compartment (inside)

12. External Baskets***

Woodland Home Products

3-5 Birmingham Av, Chester Hill,

NSW, Australia, 2162

Phone: 1800 356 660

Facsimile: 02 9724 8899

E-mail: mail@beefeaterbbq.com

Website: www.beefeaterbbq.com

* Rotisserie is sold separately

* * Trolley is packed in a separate carton

* * * May not be included with all models

Images in this manual are for illustrative purposes only.

Due to constant improvement, BeefEater

advises that

changes to the design, material, specifications and product

configuration may occur at any time w ithout notice.

6

Assembly I nstructions

General

This barbecue can be mounted onto a mobile trolley.

The Trolley is packed in a separate carton. Please refer to the Trolley instruction booklet for assembly of

the trolley, and barbecue mounting.

Once the barbecue had been properly installed, please check the following:

1. Hood is fully engaged into the four slots in the barbecue’s body.

2. All burners are in place correctly and secure

by an ‘R’ clip:

3. Vaporizers are installed individually on the steps above burners, but under the Grill (not required

under the Plate). They are inserted into the positioning slots like this:

4. Cooking surfaces (Grill and Plate) are clean, and installed over the burners and vaporizers.

Using Your Barbecue:

Before you light the Barbecue

Perform the following checks:

•Make sure all connections are tight, and leak-tested. Gas regulators fitted with a hand-tightened wheel

must be checked to ensure they are secured.

•Check that all control knobs are in the ‘Off’ position, and that gas supply is turned off.

•Ensure that the Hood on the barbecue, and the Lid on the side-burner are open. If lids are closed there

is a risk of gas accumulating inside, and creating a dangerous situation.

•The hose and regulator supplied with this barbecue must be used at all times whilst operating this

barbecue. Inspect the hose and regulator regularly for cracks or any sign of damage. If there is

excessive abrasion or wear, replace only with a genuine BeefEater regulator.

•The bottom panel of the Barbecue is clean and free of any fat or other food residue.

7

Grease Collecting Pan

The grease Collecting Pan is located on 2 brackets below the BBQ’s bottom panel, on the left-hand-side.

Make sure the pan is always in its place when operating the barbecue, to avoid fat dripping directly into

the trolley. Make sure the grease pan is emptied and cleaned regularly.

Also ensure the grease is cleaned off the bottom of the Barbecue before each use.

Lighting the Barbecue

•Ensure the appliance is placed on a flat, level, non-combustible surface.

•Ensure the regulator is connected to the LPG cylinder (See Regulator Connection page 4.), and the

hose is not subject to any twisting, and is not close to hot surfaces.

•Verify all joints are spanner tight and check for leaks after turning on gas supply. See correct

procedure on page 4.

•Ensure all knobs are in the ‘Off’ position.

•Ensure vaporizers, cooking plate and grill are in place.

•Open Gas Cylinder valve.

Note:

The barbecue is fitted with a safety feature that prevents the burners from being accidentally turned on.

You m ust push the knob inw ards to disengage the lock, and only then start turning it.

Light each burner by following this procedure:

-Read all instructions before lighting.

-Open Hood before lighting.

-Push in and turn Right-Hand-Side knob counter-clockwise to ‘High’.

-If ignition does not occur, return to ‘Off’ and repeat after 5 minutes.

Check for a clear blue flame with just a tip of yellow.

Once the right-hand-side burner is alight, light each successive burner from right to left.

Excess yellow tipping means the combustion is not right, if that is observed, turn the Barbecue

burners off, and refer to troubleshooting at the end of this manual.

Do not use more than 2 burners on ‘High’ with the hood closed.

I f the burner does not light

Keep the control knob pushed, and return the knob in the clockwise direction to the ‘Off’ position. Wait 5

minutes, and repeat the lighting procedure steps 1 – 4 above again.

If after a few attempts you still can not light the burners, contact your retailer before proceeding.

Manual Lighting

Press and turn the right hand control knob anti-clockwise to the ‘High’ position, then, using a long match,

light the right hand burner immediately through the cooking grill and vaporizer.

Check for proper burner operation

Following operating instructions light each burner and check for a clear blue flame with just a tip of yellow.

Excess yellow tipping can be adjusted using the screw on the side of the burner. If you are unable to

achieve correct operation, consult your dealer.

Preparing the Plate and Grill:

Your barbecue has heavy duty enamelled Cast Iron plate and grill. Enamel is a hard, non-rusting surface

which will ensure the long life of your cooking surface.

The plate and grill are ready to use, but it is recommended to wash them with warm soapy water and a

soft cloth, and rinse before use.

To ensure the longevity of the enamel surface on the Cast Iron plate and grill it is strongly advised to

avoid impact with other metal parts and sharp utensils.

To turn off a burner

Simply turn the knob (without pushing) clockwise to the ‘Off’ position.

8

After Use

It is a good idea to leave the barbecue on for about 10 minutes after you have finished cooking. This helps

to burn away any excess food residues and oil, and makes cleaning easier.

1. Be sure to turn off all control knobs and the gas supply.

2. Allow the barbecue to cool.

3. Clean the drip tray and cooking surfaces. Clean any food spills from the side burner, if one is

installed.

4. Lower the hood and side burner lid.

The gas cylinder supply valve must be turned off when the appliance is not in use.

Direct Cooking Method

Commonly used for traditional barbecuing. Place food over the lit grill section. Some flaring may occur, so

care must be taken while cooking. Check inside the roasting hood regularly. The direct cooking method is

recommended for steaks, chops, sausages, and hamburgers.

I ndirect Cooking

Indirect cooking involves little or no heat directly underneath the food. Instead, the food is placed on the

grill, the burners below the food are turned off or Low, and burners on either side are used. The hood is

closed to trap heat and moisture. With this method, heat circulates around the food, cooking by

convection. By trapping the vapour inside your “outdoor oven”, the cooking vapour will fall back on the

food on all sides, not just from underneath. The food cooks more evenly, and stays moist in the process.

Indirect cooking is similar to using a conventional oven and is recommended for rotisserie cooking, roasts,

poultry, casseroles, vegetables and whole fish.

When cooking a roast, it is a good idea to use a roast holder and baking dish. Always use a baking dish

with a depth greater than 35mm. Shallower trays may fill quickly and overflow, which may cause a fat

fire.

Controlling the Burners

The control knob can now be turned to the desired heat setting, Low, High or anywhere in between. The

control knob does not need to be pushed in while selecting the heat setting.

Storing Your Barbecue

When storing barbecue for extended periods, be certain all controls and cylinder valves are turned off. If

storing the barbecue indoors remove gas cylinder and store the cylinder in a ventilated area outdoors. Gas

cylinders must be stored outdoors, out of reach of children and must not be stored in a building, garage or

any other enclosed area.

The barbecue should be covered when not in use. Eg with a polyester or vinyl barbecue cover.

Technical I nformation

Note:

Do not

modify this

appliance.

Any deviation from

factory settings could

result in a safety

hazard.

Barbecue manifold

inlet thread: 3/8 SAE

male flare fitting.

Gas Pressure:

LPG – 2.75 Kpa;

NG – 1.0 Kpa

Gas Nozzle size:

LPG – Ø1.15mm;

NG – Ø1.90mm;

Gas Input: 17Mj/Bnr

9

Locating Your Barbecue:

Most importantly, this is an outdoor appliance. Ensure your barbecue is positioned safely away from

anything that can catch fire.

Outdoor Use Only: Under no circumstances is this barbecue to be used indoors. This includes garages

or any other enclosed area.

Clearance from Combustibles: Ensure your barbecue remains at a distance of at least 45 cm (18”) from

any combustible material such as wood, gyprock, paper and plants. Do not store combustible materials,

gasoline or flammable liquids or vapours within 45 cm (18”) of the barbecue.

Adequate Ventilation: Ensure there is adequate ventilation for both the barbecue and cylinder. This is

required not only for proper combustion, but also to prevent gas build up.

20mm ventilation and air-intake gap is to be left at rear of the barbecue in fixed installations.

Firm Level Surface: Use your barbecue only on a firm level surface. This barbecue is not designed for

recreational vehicles, and shall not be installed on a boat or any marine craft.

Protection From Weather: Keep the barbecue protected from adverse weather, including rain and high

winds.

Polyvinyl covers are available that have been specially designed for this range of barbecues.

Allow clear access to the entire gas supply hose and regulator.

Maintenance Access: When your barbecue is installed, you should be able to access the gas supply line

including the gas piping or hose, gas regulator, gas cylinder and any shut off valves.

Partial Enclosures: Many backyards have areas that are partially closed off, such as balconies and

pergolas. In some cases, it is hard to decide whether these partially enclosed areas should be classified as

indoor areas. This manual provides clear definition of such areas in page 10 for your reference.

Connect the Regulator to the gas Cylinder

Verify ‘Gas Type’ label & data plate attached to side of barbecue is correct for the gas you are about

to connect to.

The hose and regulator is connected to the BBQ and leak tested at factory. Do not disassemble

unnecessarily.

1. Make sure burner valves are in the ‘Off’ position.

2. Screw regulator side to the cylinder, and hand-tighten. See more details on page 4.

Note:

•If moving the BBQ from one place to another, never drag the cylinder behind. Disconnect the

cylinder first, move, and re-connect once reached the new location.

•For storage and cylinder exchange, disconnect hose at the cylinder only, do not disconnect hose

from the appliance.

•If you have purchased a trolley with a Side-Burner, please refer to Trolley instruction book for

correct connection of the Side-Burner to the gas supply.

Maintenance

1. Use only soft cloth or sponge to clean the surfaces of barbecue and then carefully dry.

2. Avoid leaving acidic or alkaline substances on the plate. It may cause discolouration and corrosion.

3. Keep the igniters probe clean. Wipe away any apparent water or dirt.

4. Clean the unit after each use to maintain the appearance and prolong the appliance’s life. Do not

use corrosive materials or harsh detergents to clean the BBQ.

Service and Maintenance Schedules Each Use 6 Monthly 2 Yearly

Check gas supply hose(s) for cracks and leaks

Check gas regulator for leaks

Check that all gas fittings are tight

Inspect and clean ignition module and probe

Inspect and clean barbecue Burners

Inspect and clean gas injectors

Check gas control valve on cylinder

Inspect gas control valves

Inspect and proof all internal structure barbecue and trolley

10

I nstallation Options

Partial Enclosures

This appliance shall only be operated in an above ground, open air situation with natural ventilation,

without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and

natural convection. Any enclosure in which the appliance is used shall comply with one of the following:

Before proceeding, you need to establish the gas type which your barbecue will run on, and the style of

installation you need.

Natural Gas or LPG/ Propane.

Before beginning installation or assembly, check that the gas type which the barbecue is designed for is

correct for the gas available to you. In most countries the choices are natural gas or LPG/propane. You will

find the gas type label on the side of your barbecue. If your barbecue uses the incorrect gas type, or if

you are unsure, consult your dealer before going any further. Using the wrong type of gas for a barbecue

is extremely dangerous.

Natural Gas Conversion: Most newly purchased barbecues are made for LPG/propane. A natural gas

conversion kit is available to allow your barbecue to run on Natural Gas. This kit includes all hoses

required for installation.

Service Assistance:

To assist you when contacting your after-sales service agent and to arrange for service, please have the

barbecue details ready when you call. You do not need to register your warranty. However, you must

retain your receipt or proof of purchase. When claiming warranty for this appliance you must provide a

copy of your proof of purchase receipt. No claims for warranty will be accepted without proof of purchase.

For all parts and service, contact your nearest BeefEater dealer.

Within a partial enclosure that includes an

overhead cover and no more than two

walls.

Any enclosure with walls on all sides, but

at least one permanent opening at ground

level, and no overhead cover.

Within a partial enclosure that includes an

overhead cover and more than two walls,

the following shall apply:

At least 25% of the total wall area

is completely open; and

At least 30% of the remaining wall

area is open and unrestricted.

In the case of balconies, at least 20% of

the total of the side, back and front wall

areas shall be and remain open and

unrestricted.