9
18) Lower The Barbecue Into The
Cart
You will need to tease the side panels apart slightly to be able
to put the barbecue into place. Make sure the barbecue is
pushed back against the rear
edge of the cart, and the front
of the barbecue is flush with
the front of the cart.
You do not need to screw
anything in at this stage. That
is done in the next two steps.
Assembly Instructions
1
2
3
a
b
17) Fit The Hose To The Barbecue
You need to connect the proper hose to the barbecue inlet before the barbecue is in place in the cart. You
should follow the separate barbecue instructions for directions on methods of connection and leak testing.
If you purchased a side burner:
Pass hose a through the side hole (arrow 1)
and connect to the barbecue. Follow your
separate side burner instructions for remaining
connection details.
If you did not purchase a side burner:
If you are using a portable LPG/propane cylinder
and you wish to place the bottle on the outside
of the cabinet, thread the hose and regulator (b)
through the hole in the side panel (arrow 1), and
connect to the barbecue.
If you are using a portable LPG/propane cylinder
and you wish to place the bottle on the inside
of the cabinet, thread the hose and regulator (b)
past the top enclosure panel from underneath
(arrow 2) and connect to the barbecue.
If you are using piped gas, your gas plumber
may choose to thread a special hose from the
rear of the cart (arrow 3).
