BedJet 1222NA Operation instructions
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 1
VET Forced Air Animal Warmer
with Remote Control
This device is designed for animal and pet warming use only. It is not
for use in any human household or human medical application.
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
®
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 2
IMPORTANT INSTRUCTIONS
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND PERSONAL INJURY, THIS
PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS
1. Read all instructions before using this device. Use this device only as described in this
manual. Any other use not recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
2. Do not operate device unattended. Turn off or unplug when not in use.
3. Make certain that the power source conforms to the electrical requirements of this device.
4. DO NOT OPERATE MORE THAN ONE BEDJET ON SAME AC-POWER OUTLET WITHOUT
ADJUSTING DUAL MODE SWITCH LOCATED ON REAR OF DEVICE TO “DUAL ZONE ON, LOW
POWER” FOR REDUCED POWER
5. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
6. DO NOT plug device into any other cord connected device, such as a power strip, surge
protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices
may create a fire hazard. Plug unit directly into a wall outlet only.
7. Always plug this device directly into a wall outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet/power strip).
8. Do not operate this device with a damaged cord or plug or after the device malfunctions or
has been dropped or damaged in any manner. Return device to authorized service facility
for examination, electrical or mechanical adjustment or repair.
9. To disconnect device, make sure device is not currently operating in heat or cool mode, turn
Power Switch to OFF, then remove plug from outlet.
WARNING
ANIMAL USE ONLY - DO NOT USE THIS WARMING SYSTEM FOR ANY
HUMAN APPLICATION
DO NOT USE FOR ANY HUMAN MEDICAL, OXYGEN OR WET
ENVIRONMENT
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 3
10. Always unplug device when not in regular use. Unplug power cord before servicing or
moving the device. WARNING: DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE
MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE DEVICE. ALWAYS
UNPLUG THE POWER CORD.
11. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening
as it may cause an electric shock, fire, or damage the device. Do not block or tamper with
the device in any manner while it is in operation.
12. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not place
unit on soft surfaces, like a bed, where openings may become blocked.
13. Always place the device on a stable, flat, level surface when operating, to avoid the chance
of the device overturning. Locate the power cord so the device or other objects are not
resting on it. Do not run cord under carpeting. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be tripped over.
14. This device has hot and arcing or sparking parts inside. Do not use the BedJet in areas where
gasoline, paint, or flammable liquids or flammable gases are used or stored. It must NOT be
used in potentially dangerous locations such as flammable, explosive, chemical -laden or wet
atmospheres.
15. This device is not intended for use in wet or damp locations. This device is NOT INTENDED
for use in bathrooms, laundry areas and similar indoor locations. Never locate the device
where it may fall into a bathtub or other water container. Do not immerse BedJet in water
16. This device is not intended for use as a room air heater.
17. Do not use device outdoors.
18. Keep the cord away from heated surfaces.
19. Do not operate where aerosol (spray) products are being used or in oxygen rich
environments.
20. Check your BedJet cord and plug connections:
a) Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat.
Be sure the plug fits tight in the outlet.
b) Heaters draw more current than small appliances, overheating of the outlet may occur
even if it has not occurred with the use of other appliances.
c) During use check frequently to determine if your plug outlet or faceplate is HOT!
d) If so, discontinue use of the heater and have a qualified electrician check and/or replace
the faulty outlets.
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 4
21. CAUTION — Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
22. Heater must not be located immediately below a socket outlet.
23. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS DEVICE WITH
ANY SOLID STATE SPEED CONTROL DEVICES.
SAVE THESE SAFETY INSTRUCTIONS
MANUFACTURER INFORMATION:
BEDJET LLC
217 Goddard Row
Newport, RI 02840 USA
Phone: +1-401-404-5250
Email: info@bedjet.com
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 5
Pre-Installation Checklist
Before attempting installation of the BedJet, please verify the following parts list from your
boxed BedJet package:
Proper Assembly Required:
All parts included are required to be fully assembled and installed onto the BedJet as part any
operation. Do not operate the BedJet without the included Air Hose. Do not attempt to use
the BedJet with air delivery accessories or air delivery components not approved or supplied by
BEDJET LLC.
Air Hose with fabric liner,
stretchable, compressible
and bendable
BedJet VET and pre-installed
HEPA filter
Radio wireless remote control
with A23 alkaline battery
1)
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 6
System Operation
Power Switches:
Main power switch is located on rear of unit, directly below power cord. Switch unit on
and wait 3 seconds. The unit will beep once and orange power light on BedJet display will
light indicating ready for operation status.
Power limiter switch is located on rear of unit on right side. Under normal use this switch
should be set to HIGH POWER: 1500W setting. Setting this switch to LOW POWER: 800W
will software limit the maximum power of the BedJet Veterinary unit to approximately 800
watts. Use the LOW POWER setting only if two BedJet units are plugged into the same
outlet or other high power devices are connected to the same outlet causing concerns
about electrical outlet overloading.
BedJet VET Wireless Remote Control:
All BedJet Veterinary operating modes are activated via the Wireless Remote Control or a
Bluetooth connected smartphone or tablet using the BedJet Veterinary App. There are no
exterior buttons located on the BedJet base unit for manual operation. The BedJet system
beeps once to acknowledge any ON commands and twice to acknowledge any OFF commands
from the remote.
Any button pressed LED indicator
High Heat Mode ON/OFF
Air Flow Increase
Cool Mode ON/OFF
Shutoff-timer Advance
Medium & Custom Heat Mode
ON/OFF
Air Flow Decrease
Beeper Mute ON/OFF
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 7
BEDJET REMOTE CONTROL SYNC TO BEDJET: The wireless remote control needs to be
paired to your BedJet in order to correctly operate. This is normally done at the factor prior
to delivery. If BedJet is powered on (verified by Power LED on BedJet display) and wireless
remote control buttons are pressed (verified by LED indicator on remote) but the BedJet
does not activate, then re-pair the remote control to BedJet with the following procedure:
To pair your remote control to your BedJet, make sure BedJet is powered OFF for 10
seconds. Turn BedJet switch ON while simultaneously pressing and holding the COOL
Button on remote control until BedJet Power ON indicator lights. BedJet will make 3 fast
beeps to indicate successful pairing to remote. Only one remote can be paired to a BedJet
base unit at any given time. The pairing is permanent until a new remote control is paired.
BedJet VET Status Display:
Regular Display Messages:
Power LED ON = System ready
Heat Mode LED ON = Unit within 1.5°C of temperature set point
Heat Mode LED Blinking = Unit still adjusting to reach temperature set point
Problem Display Messages:
Power LED Blinking & 5 Beeps = System fault code, error or over temperature. Unit will
not be operational until powered off. If problem returns consult BedJet technical
support.
Air Flow Green LED Indicator is Rolling & Beeping = HEPA filter has reached 400 hours
accumulated operation, replace and reset HEPA filter hour counter (see page 11)
High Heat Mode ON
Medium & Custom Heat Mode
ON
Power ON
Bluetooth Smartlink
ON
Air Flow Level
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 8
BedJet VET Operating Modes:
Note: Standard operating functions are supported by the Wireless Remote Control. Utilize the
Bluetooth linked BedJet Veterinary App from your smartphone or tablet computer to unlock
advanced features.
The BedJet main power switch (under the power cord) must be turned ON for the remote
control to operate the BedJet. Once the power switch is ON, the BedJet will beep once and
orange Power ON LED will light to indicate successful boot-up of the internal
microcontroller. The BedJet is now in standby mode ready to take commands from the
remote.
Activate the BedJet by pressing the desired temperature mode button on the remote once.
A single beep confirms an ON command.
Deactivate BedJet into standby by pressing the same temperature mode button again. A
double beep confirms a mode OFF command.
While active in any given heating/cooling mode, pressing a different mode button will
switch heating/cooling modes without shutoff of the BedJet. The BedJet will beep once to
indicate the mode change.
Adjust the Air Flow using the “+” or “-“ buttons on the remote to increases or decreases the
heating/cooling power to the warming blankets. The BedJet will beep once for each
increase/decrease. Press and hold the buttons for rapid increase or decrease.
Press the Shutoff Timer Advance button to increase the time left on the auto-
shutoff function above the default time settings (see table below).
Press the Mute button on remote control to silence all beeps. Press again to
reactivate beep acknowledgement of remote commands.
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 9
Operating Mode Summary
Mode
BedJet
Display LED
Air Output
Regulated
Temperature
Auto-Shutoff
Time Default
Shutoff
Timer Increase
Remote Button
Max.
Auto-Shutoff
Time Setting
High Heat
109 °F
43 °C
30 Minutes
+15 minutes
4 Hours
Medium Heat
Default via
wireless
remote
104 °F
40 °C
30 Minutes
+15 minutes
4 Hours
Custom Heat*
via bluetooth
smart remote
BedJet App*
86 to 104 °F
30°C to 40 °C
30 Minutes
Hours
+15 minutes
4 Hours
Cool
Room
temperature
1 hour
+30 minutes
12 hours
HEATING MODES: IMPORTANT NOTES
Regulated Air Output Temperature is +/- 1.5°C at end of hose. Basic heat mode functions are
available via the wireless remote control. Advanced heat mode functions can be accessed via
the BedJet Bluetooth smart remote App including.
Bluetooth Smart Remote App: USE THE APP & UNLOCK ADVANCED
FUNCTIONS NOT AVAILABLE WITH
STANDARD WIRELESS REMOTE
The BedJet comes standard with integrated
Bluetooth 4.0 for connection to Android and
iPhone smart devices (smart phones and tablet
computers). The BedJet Smart Remote App
provides more intelligent remote control
capabilities than the standard wireless remote.
IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0 P a g e | 10
These include:
Measured temperature display One-touch memory functions
Customizable heat temp feature – no more limitations to just high, medium or low
heat, select any temperature between
Visual display of remaining auto-shutoff time and easy shut-off time settings
Service hours remaining before HEPA filter recommended replacement
Lifetime operating hours on machine
Android Instructions:
Download the BedJet VET app from the Google Play Store, search under “VET Warmer”. Do not
download the regular BedJet app, this is for a different product and will not work with the
BedJet Vet Model 122NA. Once the BedJet is powered on, run the BedJet App and press the
blue window on the bottom left of main screen that says “Pair”. On following screen press
Search, the local BedJet device should show up on the list. Press the device ID and the pairing
should begin. The Bluetooth symbol on the BedJet Status Display will light once the Bluetooth
link is active with your smart device.
iOS (iPhone, iPad, iPod Touch): IMPORTANT INSTRUCTIONS IN BOLD
Download the BedJet VET app from the iTunes Store, search under “VET Warmer”. Do not
download the regular BedJet app, this is for a different product and will not work with the
BedJet Vet Model 122NA. Once the BedJet is powered on, run the BedJet App and press th e
blue window on the bottom left of main screen that says “Pair”. On following screen press
Search, the local BedJet device should show up on the list. Press the device ID and the pairing
should begin. The Bluetooth symbol on the BedJet Status Display will light once the Bluetooth
link is active with your smart device. FOR APPLE PRODUCTS, PAIRING TO THE BEDJET MUST
BE DONE THROUGH THE APP, THE BLUETOOTH CONNECTION WILL NOT PAIR IF YOU TRY TO
CONNECT THROUGH THE BLUETOOTH SYSTEM GENERAL CONTROL PANEL.
This manual suits for next models
1
Table of contents
