Becom Bluetechnix Argos 3D P32X User manual
Argos 3D -
P32X
Quick Start Guide
Version 4
© BECOM Bluetechnix 2017
BECOM Bluetechnix GmbH
Gutheil Schoder Gasse 17
1230 Vienna
AUSTRIA
www.bluetechnix.com
Argos3D-P32X –Quick Start Guide
Document No.: 900-308 / A
Publication date: February 20, 2017
Subject to change without notice. Errors excepted.
This document is protected by copyright. All rights reserved. No part of this document may be reproduced or
transmitted for any purpose in any form or by any means, electronically or mechanically, without expressly
written permission by Bluetechnix GmbH.
Windows is a registered trademark of Microsoft.
© BECOM Bluetechnix 2017
Table of Contents
1Unboxing .......................................................................................................................................... 5
1.1 In the box .................................................................................................................................. 5
1.2 Opening your Argos3D–P32X ................................................................................................... 5
1.3 Connecting your Argos3D–P32X .............................................................................................. 6
1.4 Connector Overview ................................................................................................................. 6
1.4.1 Connecting the power supply............................................................................................ 7
1.4.2 Connecting the Ethernet Cable ......................................................................................... 7
2Downloading the Evaluation Software ............................................................................................. 8
2.1 Support website ........................................................................................................................ 8
2.2 Start-up screen ......................................................................................................................... 9
2.3 Prepare your Network Interface Card (NIC) ............................................................................ 10
3Start using your Argos3D–P32X with ‘BltTofSuite’........................................................................ 11
4System Requirements & Support................................................................................................... 12
4.1 Support ................................................................................................................................... 12
5Product History ................................................................................ Error! Bookmark not defined.
5.1 Argos3D-P320........................................................................... Error! Bookmark not defined.
5.1.1 Version Information............................................................ Error! Bookmark not defined.
5.1.2 Anomalies .......................................................................... Error! Bookmark not defined.
5.2 Argos3D-P321........................................................................... Error! Bookmark not defined.
5.2.1 Version Information............................................................ Error! Bookmark not defined.
5.2.2 Anomalies .......................................................................... Error! Bookmark not defined.
5.3 Document Revision History .................................................................................................... 13
© BECOM Bluetechnix 2017
© Bluetechnix 2017
All Rights Reserved.
The information herein is given to describe certain components and shall not be considered as a guarantee
of characteristics.
Terms of delivery and rights of technical change reserved.
We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or in any
communication with you. Bluetechnix specifically disclaims any implied warranty of merchantability or fitness
for a particular purpose.
Bluetechnix takes no liability for any damages and errors causing of the usage of this board. The user of this
board is responsible by himself for the functionality of his application. He is allowed to use the board only if he
has the qualification. More information is found in the General Terms and Conditions (AGB).
Information
For further information on technology, delivery terms and conditions and prices please contact Bluetechnix
(http://www.bluetechnix.com).
Warning
Due to technical requirements components may contain dangerous substances.
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 5 | 13
1Unboxing
1.1 In the box
Argos3D–P32X
CAT5/7 Ethernet Cable
Quick Start Guide
Power Supply *
* Note
The power supply’s operating temperature is specified from 0 to +40°C. This represents not
the effective working temperature of the Argos3D–P32X sensor!
1.2 Opening your Argos3D–P32X
To access the connector compartment unscrew the two screws on the Argos3D-P32X front and take
off the connector compartment lid.
Figure 1-1: Argos3D–P32X connector compartment screw positions
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 6 | 13
1.3 Connecting your Argos3D–P32X
1.4 Connector Overview
a. Power Connector
b. Ethernet
c. General purpose input 1 & 2
d. General purpose output 1 & 2
e. Modulation Light Interface
f. Trigger
g. RS232 / RS485
h. DIP-Switch
i. Reset-Button
j. Debug-UART
k. Status LED
Marks Pin #1
b a c f
ed g i
h j
k
Figure 1-2: Argos3D–P32X connectors and interfaces
Note
Please follow the next steps in the right order to get your ‘Argos3D-P32X’ up and running
correctly.
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 7 | 13
1.4.1 Connecting the power supply
To ensure, that your Argos3D–P32X works correctly, connect the ‘Argos3D’to a 12-30V DC power supply
using connector (a) and wait for approximately 20 seconds until the camera boots up.
Pin assignment on the power connector (a): Pin #1: +12V to +30V, Pin#2: GND
Note
The power supply connector is protected against wrong polarity but the ‘Argos3D’ will not
work in case you don’t use the correct polarity! If the Argos3D–P32X doesn’t work please
check the power supply polarity first!
1.4.2 Connecting the Ethernet Cable
Plug in the Ethernet cable (b) and connect your Argos3D–P32X to your PC.
Figure 1-3: Argos3D–P32X with connected power supply and Ethernet cable
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 8 | 13
2Downloading the Evaluation Software
Please log in to our support website at https://support.bluetechnix.com/ and download the Argos-P32X
customer software package. This package also includes the Bluetechnix ToF-Suite.
2.1 Support website
Select ‚free access‘
Figure 2-1: Download Evaluation Package
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 9 | 13
2.2 Start-up screen
Figure 2-2: Start-up screen
Please select your product: Argos 3D –P32X
Please follow the instructions on the WEB-Site
Quick Start Guide - Argos 3D - P32X Last change: 20 February 2017
Version 4
© Bluetechnix 2017 Page 10 | 13
2.3 Prepare your Network Interface Card (NIC)
Once you have connected your Argos3D–P32X to a Network Interface Card (NIC) of your PC give this NIC
the IP-Address 192.168.0.1 with a subnet mask of 255.255.255.0.
No driver must be installed on your PC!
The Argos3D–P32X uses IP-Address 192.168.0.10 with subnet mask 255.255.255.0.
Table of contents
Other Becom Control Unit manuals
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
