bdiusa.com
customerservice@bdiusa.com
ARENATM 9970
CABINET MOUNT
Your Arena Flat Panel Mount is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Arena Flat Panel Mount is designed for indoor use and only on BDI
cabinets. Clean steel parts with a moist cloth.
Step 1
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
For all other concerns, please contact your BDI Retailer.
Step 2
Measure the height of your BDI AV cabinet (not including
the base) to determine if the mount riser N is needed.
If your cabinet height is:
• 16-18.5” (less than 47cm) then proceed to Step 3A
(Avion, Nora, Marina, and Mirage)
• 18.5-21” (more than 47cm) then proceed to Step 3B
(Corridor, Elements)
Designed by BDI Design Studio.
These distinctive product configurations are protected by US and international patents,
trade dress, and/or copyright laws. Arena and BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2018, BDI Made in Taiwan. 06.20.2019 v9
A - 5mm Allen Wrench x 1
I - Vertical Mounting
Bracket x 2
F - Horizontal Mounting
Bracket x 1
E - 5/16 x 1-3/4in Screws x 4
G - 5/16 x 3/8in Screws x 4
D - Swiveling Bracket
Assembly x 2
K - Leveling Disc x 2
H - Washer x 4
C - Spine x 1
B - 5/16 x 5/8in Screws x 10
J - TV Mounting Kit x 1
M - Cabinet Mount
Brackets x 2
N - Mount Riser x 1
O - 5/16 x 2-3/8” Screws x 3
L - Nut x 2
Measure
Here
