348690C 09/18
T chnical data
Technology: Active infrared, 40 kHz
Operating temperature: -20°C to 40°C
6
EU Declaration of Conformity
7
WEEE
8
Status Display B p r function
(if turned on - see section 4.2)
No Safety curtain spot detected Green No beeping
Safety curtain spot detected Red Constant beeping
BBC Birch r Smart Acc ss
Bircher America I c.
870 Pratt Avenue N
Schaumburg, IL 60193
Phon : 847-952-3730
Toll-Fr : 800-252-1272
Fax: 847-952-2005
Email: amercia@bircher.com
W b: www.bircher.com
Use sensor scan mode to determine available sensor addresses.
Use the 2” width mark on the RC Duo 2 to determine e.g. when the infrared
safety curtain is 2” from the face of a sliding door.
2” (5 cm)
Beeper function
4.2
LED Gr n R d
On Continuously Idle Safety curtain spot detected
Blinking Low batt ry Safety curtain spot detected AND low batt ry
BEEPER ON: Press and hold Bfor 2 seconds
BEEPER O *:Press and hold Bfor 2 seconds
Remote must be turned on to access beeper function
*Beeper function turns off when remote turns off. This setting must be
re-activated each time the remote is turned on.
Sensor scan mode
4.3
LED indicator
4.1
Saf ty curtain spot d t ctor
4.4
Additional functions
4
Max. air humidity: 90%, non-condensing
Batteries: 3 AAA (1.5 V) batteries
Press Ffor 2 s conds to
enter sensor scan mode.
All addresses assigned to
sensors in proximity are illu-
minated on the keypad.
The active address is now
illuminated on the keypad.
Select the corresponding ad-
dress to establish communi-
cation with a specific sensor.
Safety instructions
5
Only use this remote for it’s intended purpose.
Do not point the IR beam towards your eyes or those of others!
Observe all national and international door safety regulations.
Only trained, qualified personnel may install sensors.
This unit may only be opened and repaired by the manufacturer.
Always consider the safety functions of your application as a whole, never just in relation to one individual section of the system.
The installer is responsible for carrying out a risk assessment and installing sensors and door systems correctly.
Page 2
Important Note Contact / Importer
BBC Bircher Smart Access reserves the right to cha ge a y
i formatio i this docume t without otice.
For the latest versio , please visit www.bircher.com
or call 800-252-1272 to request a copy.
Desig ed i Switzerla d / Made i Chi a
See attachme t
Devices with this symbol must be treated separately duri g disposal. This must be do e i accorda ce with the laws of
the respective cou tries for e viro me tally sou d disposal, processi g a d recycli g of electrical a d electro ic equipme t.
