Bauhn ASBEB-0121 User manual

User Manual

MODEL: ASBEB-0121

2.0 Premium Bluetooth®Soundbar

with Enhanced Bass

AFTER SALES SUPPORT

1300 886 649

[email protected]

MODEL: ASBEB-0121 PRODUCT CODE: 704551 01/2021

AUS

Welcome

Congratulations on your purchase!

This manual tells you all you need to know about using your new BAUHN®product.

Please take special note of any important safety and usage information presented with the symbol.

All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,

as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.

Domestic use only: This product is intended for indoor domestic use only. It is not suitable for commercial, industrial

or outdoor use. Do not use this product for anything other that its intended purpose, and only use it as described in

this manual.

We hope you will enjoy using your purchase for many years to come.

Operation 17

General Operation 17

Input Modes 17

Bluetooth®18

Pairing Bluetooth®Devices 18

Bluetooth®Playback 19

Troubleshooting 20

Specications 22

Compliance and Responsible Disposal 23

Warranty Information 24

Contents

Welcome 2

Unpack and Prepare 4

What's in the Box 4

Important Tips 5

Installation 6

Wall Mounting Instructions 8

Connect to Power 10

Controls and Connections 11

Get to know your Soundbar 11

Buttons on the Soundbar 11

Rear Ports on the Soundbar 12

Remote Control 14

Setup 14

Using the Remote Control 15

Remote Overview 16

Repair and Refurbished

Goods or Parts Notice 25

4 | UNPACK AND PREPARE

Unpack and Prepare

What's in the Box

Before setting up your new Soundbar, check you have everything:

A. 2.0 Channel Soundbar

B. Remote Control

C. AAA Activ Energy Batteries (2)

D. 3.5mm Audio Cable

E. Optical Cable

F. Wall Mount Installation Kit

G. Power Cable

H. User Manual

I. Warranty Certificate

J. Quick Start Guide

K. General Safety Warnings

You will need:

• Phillips-head screwdriver and a drill (for wall mount installation)

• HDMI Cable, if you want to set up and use HDMI CEC. (Otherwise you can use the included optical cable if you

don't use HDMI.)

UNPACK AND PREPARE | 5

Important Tips

• Place the Soundbar on a level surface.

• Place the Soundbar away from any source that may generate heat or vibrations.

• Make sure there is enough space around the Soundbar for airflow.

• The remote control works up to 6 metres away from the Soundbar.

• Unplug the Soundbar before cleaning it.

• Clean using a dry cloth only - do not use water or chemicals.

• Use only the power supply provided.

• Keep liquid, children and pets away from the Soundbar at all times.

6 | UNPACK AND PREPARE

Installation

This soundbar can sit free-standing on a surface, or it can be mounted to a wall.

Free-standing

Place on a secure, flat surface. Make sure the soundbar

is standing on its rubber pads (on the left and right sides

of the soundbar) and no other area of the bottom of

soundbar is touching the surface.

UNPACK AND PREPARE | 7

Wall mounted

Wall mounting instructions are on the following pages.

• Wall-mounted installation must be carried out

by qualified personnel only. Incorrect assembly

can result in severe personal injury and property

damage! If you intend to install this product yourself,

you must check for installations such as electrical

wiring and plumbing, which may be hidden inside or

behind the wall.

• It is the installer’s responsibility to verify and confirm

that the wall will safely support the total load of the

soundbar and wall brackets.

• Additional tools (not included) are required for the

installation.

• Do not overtighten screws.

• Use an electronic stud finder to check the wall type

before drilling and mounting.

8 | UNPACK AND PREPARE

Wall Mounting Instructions

Fix the supplied wall-mounting

brackets (marked with "s") to the

bracket fixing holes on the back

of the soundbar with the supplied

short screws. Affix the brackets as

shown in the illustration (left).

Use a pencil to make drill hole marks on the

wall for the anchors. Make sure the marks are

level before drilling. Use a 6mm bit and power

drill (not supplied) to drill holes on the marks.

350mm

18mm

UNPACK AND PREPARE | 9

Place the soundbar with wall-

mounting brackets (marked with

"S") onto the mounting brackets

(marked with "W"), which are fixed

to the wall. Use the included short

screws to tighten them. Make sure

the soundbar is attached firmly to

the wall.

Insert the included plastic anchors into

the holes and push in until they are flush

with the wall. Secure the supplied metal

brackets (marked with "W") to the wall by

screwing the included tapping screws into

the anchors and tighten until the screw

head is fully inserted and flush with the

metal bracket.

10 | UNPACK AND PREPARE

Connect to Power

Make sure the soundbar is switched off at the power

outlet until you have finished connecting your cables.

Don't forget to plug in the

soundbar to the power outlet.

Leave the power switched off until

installation is finished.

Table of contents

Popular Speakers System manuals by other brands

JVC

JVC CA-MXK5R instructions

LG NB4532B owner's manual

JVC

JVC CA-FSH100 instructions

5Core

5Core Pro Series Operation manual

EAW

EAW MQV1394e Specifications

Lynx

Lynx GXR-LA10A user manual

iLive

iLive ITB066B user guide

RDX

RDX QuickStation 4 product manual

Electro-Voice

Electro-Voice S-122 Specifications

Sven

Sven SPS-619 GOLD Operation manual

Pioneer

Pioneer CS-7070 instruction manual

EAW

EAW UB82e Technical specifications

Sondpex

Sondpex Active Speaker System and Digital Music... User manual and installation instructions

JVC

JVC NX-PN7 instructions

Marshall Amplification

Marshall Amplification AR-DM61-BT user manual

Yamaha

Yamaha NX-A01 - Speaker Sys Product bulletin

SE Audiotechnik

SE Audiotechnik I-LINE manual

Gemini

Gemini WRX-843 Series user manual