BASSFACE SD200.1 User manual

!Warning!

Bass Face products can produce sound pressure levels that can

permanently damage your hearing. Please exercise extreme caution

when setting volume levels. Also be mindful of other listeners, they might

not enjoy listening at the same levels as you. We will not be held in any

way responsible for injuries caused by the misuse of our products.

Please take care when attempting any alterations or installations with the

electrical system of the car. ALWAYS disconnect the positive terminal at

the battery.

BassBass Face operates a policy of continuous improvement and reserves the right to update

and alter the content and design of both product and instructions as it sees fit. Although

the information contained in the instruction manuals is given in good faith based on

extensive testing and experience the final responsibility for the installation and operation

of your system must rest with the installer and the operator. If you are installing your

equipment yourself please be realistic about your abilities and seek professional advice

if you are unsure about any aspect of the task that you are undertaking.

If you face a particular problem with your installation or product we will be happy to

answer your questions. Please email info@bassfaceaudio.co.uk - please note that our

response time is 2 to 3 days, and that we are closed over the weekend. For more urgent

help please contact your country distributor. In the UK this is Thompsons Ltd

(www.thompsonsltd.co.uk)

Please note that Bass Face is unable to process warranty support directly. For warranty

support you MUST contact your distributor.

Introduction:Introduction:

Firstly, thank you for your purchase. Every element of this product has been optimised to

give you the best possible performance for your money. We think that Bass Face

represents the highest quality to price ratio available on the market today.

Please take the time to read these instructions carefully. You will need to follow them to

have a successful install and get the most from the product.

Do remember that incorrect installation or abuse is NOT covered under warranty – it is

YOUR responsibility to make sure that your installation and partnered product is suitable

and compatible.

The SD200.1 is a fully featured car source unit with a fixed ront panel and RCA outputs

for system building. By following these guidelines we hope that you get the most from

your unit.

Physically the unit conforms to the standard DIN size, although since there is no CD deck

you will notice that the depth is less than many units, which can make installation easier.

The

The surround trim of the unit is removable which allows integration into vehicles where

the dashboard surround itself becomes that trim. You can install the unit using side

screws or with the provided cage.

The unit is pre fitted with a proper wiring harness and ISO female which can be plugged

into many ISO compatible cars without further work.

IT IS ABSOLUTELY CRITICAL THAT YOU TEST THE VEHICLE ISO PLUG BEFORE

YOU COMMIT TO PLUGGING IN YOUR NEW BASSFACE UNIT. MANY VEHICLES

HAVE STRANGE AERIAL OR IGNITION SET UP’S WHICH CAN DAMAGE THE NEW

RADIO OR THE CAR IF THE CONFIGURATION IS NOT ALTERED BEFORE THE

UNIT IS POWERED UP.

Because there is a proper wiring harness, it is easy to cut the cables between the radio

and the ISO plug and make changes without modifying the vehicle.

Please

Please refer to the wiring diagram on the top of the radio for detailed colour instructions

for the wires.

If you have to remove the ISO plug because you are installing the unit into a caravan or

other vehicle that requires a bare ended cable setup then please pay extreme attention

to the wiring. Use proper soldered or ratchet crimped connections and ensure that

insulation is made in a correct and professional way. Note that the earth needs to be

made really well to get the most out of the integrated amplifier. Note also that the unit

needs to see power on the memory wire (yellow) AND power on the ignition switch wire

(red) for it to power up. You can run up to 4 speakers at 4 ohms each off this unit. DO

NOT attempt to run the unit with a nominal impedance of less than this value, otherwise

non-warrantable damage can result. (ie leaving existing rear speakers connected when

you add additional speakers in a parcel shelf etc)

Once the unit is installed and working you can refer to the following guidelines:

1 Power Button

2 Play/Pause Button

3 Mute Button

4 Clock Button

5 Mode / Preset Button (switches listening source / on radio sets a preset – press and

hold for 1 second)

6 Intro Button (plays the first 10 seconds of each track)

7 Band Button (Access to each of the levels of FM presets)

8 Infra Red Eye

9 USB Slot

10 SD/MMC Slot

11 3.5mm Aux Input

12 Skip Track Back

13 Reset Button (hold for 5 seconds)

14 Skip Track Forward

15 Volume Knob

Remote control Operations

1.Power/off

2. Radio memory number

3. Scan

4. Band switching/Auto-search/

5. Volume increase

6. Previous song6. Previous song

7. Volume decrease

8. Next 10 songs

9. Sound effect setting

10.Switch mode

11. Mute

12. Random

13. Repeat13. Repeat

14. Clock

15. Next song

16. Next 10 songs

Basic Operation

Power/Mute Button:

PressPress once for power on. Once power is on, press again to put on/off mute. Hold button

down to power off.

Volume Control / Sound Control:

Turn to control volume. Push in to cycle through sound options (BASS - TREBLE - FAD -

BAL) Once display shows BASS/TREBLE etc. Turn to increase/decrease level.

MOD/APS Button:

This button is to change mode to Radio/SD MMC/USB

WhenWhen is radio mode, hold down for 5 seconds to scan the radio stations that have been

saved.

Radio/Track Forward and Back Buttons:

In Radio mode:

Press these buttons to search the radio, it will stop automatically when it gets to a station.

Hold this button down to search manually, once left for 5 seconds, the unit will go back to

automatic search function.

In MP3 Mode: In MP3 Mode:

Press once to change track up/down hold down skip 10 tracks at a time.

EQ Button:

Press to cycle through the preset EQ modes (POP ROCK CLASSIC FLAT)

Clock Button:

Push to display current time. To set the time - when the time is displayed, hold the button

down until the time starts ﬂashing, then you can use the track forward and backward

buttons to set the hours and minutes. To save, do not press any button for 5 seconds.

Reset Button: Reset Button:

This button can be used to reset the unit should it choose to misbehave in some way.

Wiring Diagram

Table of contents

Other BASSFACE Car Stereo System manuals

BASSFACE

BASSFACE DB1.4 User manual

BASSFACE

BASSFACE SPL4.1 User manual

BASSFACE

BASSFACE TEAM DSP6/10 User manual

Popular Car Stereo System manuals by other brands

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 installation guide

Clarion

Clarion PU-9836A Service manual

Sony

Sony MEX-BT5750U operating instructions

Mitsubishi Electric

Mitsubishi Electric AR0M manual

Sony

Sony RM-X7BT reference guide

Insignia

Insignia NS-HD5113 user guide

Clarion

Clarion BTD3341 user manual

USA SPECS

USA SPECS PA11-VW6 owner's manual

Sony

Sony MEX-N4380BT operating instructions

Kenwood

Kenwood KCD-BT6544U/UY Service manual

JVC

JVC KD-DB912BT instruction manual

Philips

Philips CSQ405/98 user manual

Alpine

Alpine TDM-7544 Specifications

Autotek

Autotek TransAm TA 1400 user manual

Clarion

Clarion PN-3124N-A Service manual

Denso TEN

Denso TEN FT0108A user manual

Pyle

Pyle PLD57MU owner's manual

Harman

Harman Chrysler Radio Navigation System RB4 user manual