Basha Dreamoc XL2 User manual
media group inc.
tactile
visual
olfactive auditory
taste metrics
holo
Master Canadian Distributor
1
Content
EU-declaration of conformity 2
Security precautions 3
Product guarantee 4
Package contents 5
How to start using the Dreamoc 6
How to place an object in the Dreamoc 8
How to change the film content on the Dreamoc 9
How to adjust the sound and light 10
Cleaning the Dreamoc 12
Connecting the Dreamoc to the internet 12
Troubleshooting 13
2
EU-declaration of conformity
EU-declaration of conformity
Realfiction ApS
Øster Alle 42, 5 th
DK-2100 Copenhagen Ø
Hereby declares that the DREAMOC meets in Council Directive 2004/108/EC of December
15, 2005 on the approximation of Member States relating to electromagnetic compatibility.
Dreamoc is designed to display and promote products along with an electronic produced and
animated colour show.
Content and scope of the colour show is designed in an interchangeable memory card, and
worked with the client's wishes.
Dreamoc consists of a display unit that is mounted on a floor stand. Display unit can also be
mounted on the wall without using a stand, or placed on other stable surfaces.
Furthermore, the product is in accordance with Council Directive 2006/05/EF of December
12, 2006 (low voltage).
DK-2100 Copenhagen, date 27/1-2012
Clas Dyrholm
CEO, Realfiction ApS
It is important to read this manual before using the Dreamoc, and to follow
advices and instructions on safety, operation and general use to get the best
possible experience with your Dreamoc.
The Dreamoc is designed to showcase products and other objects in
combination with free floating 3D video animations.
If the Dreamoc is used for purposes other than described, the CE marking
and guarantee will only be valid after a written approval from Realfiction.
The Dreamoc is design protected in shape and form. Realfiction and Dreamoc
are registered trademarks owned by Realfiction ApS.
3
Security precautions
Installation of the Dreamoc must be done according to this manual, and must
be performed by an adult (Over 21 years).
The Dreamoc must be placed on a horizontal, stable and plane surface. The
floor stand must be fitted with sufficient ballast as described in this manual.
Do not install the Dreamoc in narrow passageways or other places where a lot
of people and equipment has to pass close by, thereby risking collisions that
might cause the Dreamoc to tip over causing human injuries and damage to
property.
The Dreamoc must be connected to a power outlet with current and voltage
as described in the product marking.
Turn off the Dreamoc before changing the Compact Flash card.
During service and cleaning the Dreamoc must be turned off, and the power
plug removed from the outlet. To disconnect the apparatus from the mains,
the plug must be pulled out from the mains socket, therefore the mains plug
shall be readily operable.
Handle the liquid crystal display (LCD) with care. The LCD is a very delicate
display device: Do not press its surface with excessive force, hit it or prick it
with a sharp object.
No sand or dust! Fine sand or dust entering the system could cause
malfunctions or defects.
No water or oil! Water or oil entering the system could cause electric shock,
malfunctions or defects.
The surface of the system will be slightly warm when using, but this does not
indicate a fault.
Be careful of unusual ambient temperature. Using the system in a place
where the temperature is over 40°C (140°F) or lower than 0°C (32°F) may
result in malfunction.
Do not place the Dreamoc in direct sunlight or near magnetism, corrosive gas
or ultrasonic humidifier. This could cause malfunction.
Do not expose the Dreamoc to soot or steam. Thick soot or steam could
damage the electrical components and cause malfunctions.
Keep the memory card out of reach of children to prevent swallowing.
4
Product guarantee
The manufacturers guarantee includes production, materials and function of
the supplied equipment. The guarantee is valid only if the supplied material is
used as described in this manual, and to the purpose to which it has been
designed.
The guarantee includes repair or replacement of malfunctioning components.
The guarantee is no longer valid if any unauthorized repairs or replacement of
parts have been performed on the product.
The LCD screen is a product of high precision technology. Out of the total
pixels 0.01% or less pixels may be out (black dots) or may remain lit as
coloured dots (red, blue, and green). This shows the limitations of the current
technology, and does not indicate a fault.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product, or their local government
office, for details of where and how they can take this
item for environmentally safe recycling. Business users
should contact their supplier and check the terms and
conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
5
When receiving the Dreamoc
Please be careful when unwrapping the Dreamoc. Especially the optic is a
highly precise component.
Package contents
1.Dreamoc XL2 display
2.Steel spacers for protecting the Dreamoc when transporting
3.User manual
4.A set with two keys for the Dreamoc XL2 backdoor
5.Cleaning cloth - use dry only
6.5m power cord with European Schuko plug (C13 PC type cable)
6
How to start using the Dreamoc XL2
①Start by removing the two steel spacers by releasing the screws on
the bottom of the Dreamoc, where the steel spacers is attached. Then
gently remove the spacers.
② Open the backdoor using one of the keys. Remove the back plate
loosening the clasps and remove the back plate entirely.
NOTE: Once opened, the backdoor should be taken completely off to avoid
damage!
7
③ Insert the power cable and connect it to a power outlet. AC 100-240V, 50-
60 Hz, 240W. Check that the I/O switch is set to I (on/off: I = ON, O = OFF).
④Wait about 30 seconds. The Dreamoc is delivered with a pre-installed
movie which will start automatically. The Dreamoc can operate 24/7, but if you
would like to turn off the power, you can either use the on/off switch or simply
cut power to the Dreamoc. The system is not damaged in any way, and as
soon as the unit gets power again, it will start automatically.
8
How to place an object in the Dreamoc
When you would like to place a physical object inside the pyramided shaped
optic, you open the backdoor with the key supplied with the Dreamoc, and
place the object inside. The white bottom plate can be taken out completely.
This makes it possible to create a scenery or landscape inside the Dreamoc,
or to securely fix an object to the plate should this be necessary.
9
How to change the film content on the Dreamoc
Start by turning off the power. Open the back of the display with the key
supplied with the Dreamoc. You can now see a USB memory stick in the USB
connector at the left side. To exchange the USB memory stick, take out the
first USB memory stick and insert the new USB memory stick. Do not use
excessive force when inserting the USB memory stick. Afterwards you close
the Dreamoc and turn on the power. Wait about 30 seconds and the Dreamoc
will start showing the new content.
NOTE: The movies on the USB memory stick must be placed in a folder
named “MagicInfoSlide” - written exactly like this.
We recommend keeping a backup copy of your Dreamoc content, either on a
computer or on a backup USB memory stick.
Table of contents
