Barco ImagePRO-4K Installation and operating manual
ENABLING BRIGHT OUTCOMES
ImagePRO–4K
Safety Guide
Sicherheitshandbuch
Guía de seguridad
Guide de sécurité
Guida alla sicurezza
Veiligheidsgids
Guia de segurança
Руководство по технике безопасности
Säkerhetsguide
安全ガイド
안전 가이드
安全指南
安全指南
Barco Inc, Image Processing
3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
www.barco.com/en/support
www.barco.com
Registered address: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
3
About this chapter
Read this chapter attentively, it contains important information to prevent personal injury while using the
ImagePRO–4K video processor. It also includes several cautions to prevent damage to the ImagePRO–4K
video processor. Ensure that you understand and follow all safety guidelines, safety instructions and warnings
in this chapter before using your ImagePRO–4K video processor.
Covered ImagePRO–4K products
Product Contains Accessories included
R9004795 •1x 14-9750004-90 •European Power Cord CEE7 (not included with units shipped to
China)
•1x B1959864 •US Power Cord NEMA 5/15 (not included with units shipped to
China)
•1x B1959865 •China Power Cord GB 2099 (only included with units shipped to
China)
•1x R9871179 •Rear Rack Mount Support Kit, includes brackets, side support
plates, screws, and washers
•2x 09-0904021-90 •Rear connector protectors
•4x 13-0211010-90 •8-32 x .38 Pan Head Screws for rear connector protectors (x2 per
protector)
•B561132 •USB Thumb Drive (Contains Users Guide, System Software and
Control GUI)
About this guide
Part number Description Level
R5906169 Safety Guide Any person that comes in contact
with the ImagePRO–4K product
A printed copy of the Safety Guide and Quick Start Guide is included in the ImagePRO–4K box at
purchase. Please check online for the other documents.
Always check for the latest version of the manual at the following address. Click on the ImagePRO–
4K product page and go to the “Downloads”tab.
www.barco.com/en/Products-Solutions/Image-processing/Presentation-switchers
R5906169-00 ImagePRO–4K
Safety guidelines 1
R5906169-00 ImagePRO–4K 5
1.1 General considerations
General safety instructions
•Before operating this equipment please read the ImagePRO–4K User Guide thoroughly and retain it for
future reference.
•All warnings in this documentation manual should be adhered to.
•All instructions for operating and use of this equipment must be followed precisely.
•All local installation codes should be adhered to.
Battery caution
CAUTION: Risk of explosion when the battery is replaced by an incorrect type. Dispose of used batteries
according to the waste instructions.
ATTENTION : Risque d'explosion en cas d'usage d'une batterie non prévue pour cet appareil. Jetez les
batteries usagées suivant les règles de recyclage prévues.
WARNING: Ensure you understand and follow all safety guidelines, safety instructions, warnings
and cautions mentioned in the product documentation.
WARNING: The mains power plug connected to the wall outlet must be easily accessible at all
times for all installation modes.
Environment
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious
damage to it.
1.2 Important safety instructions
To prevent risk, personal injury, and ImagePRO–4K video processor damage
Please read this chapter carefully. It contains important information to prevent personal injury while installing
the ImagePRO–4K video processor. Furthermore, it includes several cautions to prevent damage to the
device. Ensure that you understand and follow all safety guidelines, safety instructions and warnings
mentioned in this chapter before installing the ImagePRO–4K video processor. After this chapter, additional
“warnings”and “cautions”are given depending on the installation procedure. Read and follow these
“warnings”and “cautions”as well.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Only trained technicians may install an ImagePRO–4K video processor.
•Installation of the ImagePRO–4K video processor must be done in a dust free area.
•Only use attachments/accessories specified by the manufacturer.
•CAUTION: Troubleshooting must be performed by a trained technician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
•Refer all servicing to qualified service personnel. Servicing is required when the system has been
damaged in any way, such as liquid has been spilled or objects have fallen into the system, or the system
has been exposed to rain or moisture, does not operate normally, or has been dropped.
•FRAGILE: The ImagePRO–4K video processor is fragile. Handle the unit with care at all times.
•Do not remove the top cover during normal operation. Removal of the top cover exposes dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover
installed.
Safety guidelines
R5906169-00 ImagePRO–4K
6
•During maintenance operations, always switch off the unit and unplug the power cords before removing
the cover, unless otherwise stated.
•Always wear a wrist band which is connected to the ground while handling the ESD sensitive parts.
•Wear insulating gloves during the execution of the installation and maintenance actions to avoid short-
circuit.
•Be careful never to drop anything into the ImagePRO–4K video processor assembly during the procedure.
The fall of a tool or a spare part in the unit could have catastrophic consequences when you will restart the
system.
•Be careful to always follow strict procedures during maintenance operations (spare parts replacement).
•This product is intended to operate from a power source that will not apply more than 230 volts rms
between the supply conductors or between both supply conductor and ground. A protective ground
connection by way of grounding conductor in the power cord is essential for safe operation.
•This product is grounded through the grounding conductor of the power cord. To avoid electrical shock,
plug the power cord into a properly wired receptacle before connecting to the product input or output
terminals. A protective-ground connection by way of the grounding conductor in the power cord is essential
for safe operation.
•Use only the power cord and connector specified for your product. Use only a power cord that is in good
condition. Refer cord and connector changes to qualified service personnel.
•To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating
characteristics. Refer fuse replacement to qualified service personnel.
•Replace spare parts only with the same or equivalent type recommended by the manufacturer.
•Save the original shipping carton and packing material. They will come in handy if you ever have to ship
your equipment. For maximum protection, repack your set as it was originally packed at the factory.
•Rated maximum ambient operating temperature, ta= 40°C (104°F).
•To avoid explosion, do not operate this product in an explosive atmosphere.
1.3 Environmental condition check
Environment condition check
The unit must always be mounted in a manner which ensures both air inlets and outlets are free. For
installations in environments where the device is subject to excessive dust, it is highly advisable to take
measures to prevent the dust from reaching the unit. If this is not a feasible , then the unit should be relocated
to a different dust-free location.
It is the customer's responsibility to ensure at all times that the device is protected from the harmful effects of
hostile airborne particles in the environment of the device. The manufacturer reserves the right to refuse repair
if a device has been subject to negligence, abandon or improper use.
Environment conditions
Table below summarizes the physical environment in which the ImagePRO–4K video processor may be safely
operated or stored.
Environment Operating Non-Operating
Ambient Temperature 0°C (32°F) to 40°C (104°F) -10°C (14°F) to 60°C (140°F)
Air cleanliness Clean office environment (equivalent with
cleanroom standard ISO 14644-1 ISO Class
9)
n.a.
Humidity 5% to 85% RH Non-condensed 0% to 95% RH Non-Condensed
Altitude -60 (-197Ft) to 3000m (9843Ft) -60 (-197Ft) to 10000m (32810Ft)
Environment
Do not install the device in a site near heat sources such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust or humidity. Be aware that room heat rises to the ceiling; check that
temperature near the installation site is not excessive.
Safety guidelines
R5906169-00 ImagePRO–4K 7
1.4 Plug types
AC Power cord with NEMA 5/15 plug up to 13 A
The wires of the power cord are colored in accordance with the following code:
Green or yellow + green: Earth (Ground)
Blue or white: Neutral
Brown or black: Line (Live)
Power cord with GB 2099 plug up to 10 A
The wires of the mains lead are colored in accordance with the following code:
Green + yellow: Earth (Ground)
Blue: Neutral
Brown: Line (Live)
AC Power cord (mains lead) with CEE 7 plug up to 10 A
The wires of the mains lead are colored in accordance with the following code:
Green + yellow: Earth (Ground)
Blue: Neutral
Brown: Line (Live)
1.5 International safety standards
Standards overview
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1,
IEC62368-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of
information technology equipment including electrical business equipment. These safety standards impose
important requirements on the use of safety critical components, materials and insulation, in order to protect
the user or operator against risk of electric shock and energy hazard and having access to live parts. Safety
standards also impose limits to the internal and external temperature rises, radiation levels, mechanical
stability and strength, enclosure construction and protection against the risk of fire. Simulated single fault
condition testing ensures the safety of the equipment to the user even when the equipment's normal operation
fails.
Safety guidelines
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95 70, USA
Registered address: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
R5906169-00 | 12/07/2018
3
Über dieses Kapitel
Lesen Sie dieses Kapitel aufmerksam, es enthält wichtige Informationen zur Verhinderung von
Personenschäden bei der Nutzung des ImagePRO–4K Videoprozessors. Darüber hinaus enthält dieses
Kapitel diverse Warnhinweise zur Vermeidung von Beschädigungen des ImagePRO–4K Videoprozessors.
Stellen Sie sicher, dass Sie alle Sicherheitsrichtlinien, Sicherheitsanweisungen und Warnungen in diesem
Kapitel verstehen und befolgen können, bevor Sie den ImagePRO–4K Videoprozessor verwenden.
Abgedeckte ImagePRO–4K-Produkte
Produkt Inhalt Mitgeliefertes Zubehör
R9004795 •1x 14-9750004-90 •Europäisches Netzkabel CEE7 (nicht im Lieferumfang von
Geräten, die nach China geliefert werden)
•1x B1959864 •US-Netzkabel NEMA 5/15 (nicht im Lieferumfang von Geräten, die
nach China geliefert werden)
•1x B1959865 •Chinesisches Netzkabel GB 2099 (nur im Lieferumfang von
Geräten, die nach China geliefert werden)
•1x R9871179 •Kit für hintere Rack-Montage –enthält Halterungen,
Seitenmontageplatten, Schrauben und Unterlegscheiben
•2x 09-0904021-90 •Schutzvorrichtungen für hintere Anschlüsse
•4x 13-0211010-90 •8-32 x 0,38-Flachkopfschrauben für Schutzvorrichtungen der
hinteren Anschlüsse (x2 pro Schutzvorrichtung)
•B561132 •USB-Stick (mit Benutzerhandbuch, Systemsoftware und
Benutzeroberfläche)
Informationen zu diesem Handbuch
Teilenummer Beschreibung Level
R5906169 Sicherheitshandbuch Alle Personen, die mit dem
ImagePRO–4K-Produkt in Kontakt
kommen
Eine Druckausgabe von Sicherheitshandbuch und Schnellstarthandbuch ist im Lieferumfang des
ImagePRO–4K enthalten. Bitte prüfen Sie online die Verfügbarkeit der anderen Dokumente.
R5906169DE-00 ImagePRO–4K
Sicherheitsrichtlini-
en 1
R5906169DE-00 ImagePRO–4K
4
Informieren Sie sich stets unter der folgenden Adresse, wie die aktuelle Version des Handbuchs
lautet. Klicken Sie auf die ImagePRO–4K-Produktseite und öffnen Sie die Registerkarte
„Downloads“.
www.barco.com/en/Products-Solutions/Image-processing/Presentation-switchers
Sicherheitsrichtlinien
Other manuals for ImagePRO-4K
1
Table of contents
Languages:
Other Barco Switch manuals
Barco
Barco ACS-2048 User manual
Barco
Barco DCS-200 User manual
Barco
Barco PresentationPRO-II User manual
Barco
Barco DCS-100 User manual
Barco
Barco DCS-200 User manual
Barco
Barco DCS-200 User manual
Barco
Barco SDI-DMX Mixer Pro User manual
Barco
Barco ACS-2048 User manual
Barco
Barco MatrixPRO 8x8 DVI User manual
Barco
Barco FSN-150 User manual
Barco
Barco FSN-1004 User manual
Barco
Barco DCS-100 User manual
Barco
Barco MVSP10 User manual
Barco
Barco ScreenPRO-II User manual
Barco
Barco ScreenPRO-II User manual
Barco
Barco SMV-116 User manual
Barco
Barco VSE 60 User manual
Barco
Barco R9806700 User manual
Barco
Barco FSN Series User manual
Barco
Barco PDS User manual
