Baratza Encore Installation and user guide

How to: Power Cord Replacement

Encore, Virtuoso, Preciso, Virtuoso+

Time: 25 min

Difculty: Medium

Tools/supplies: Flat head screwdriver. T10 screwdriver. Phillips screwdriver. Pick. Pliers (optional)

Parts: US Power Cord (SKU 6300)

Additional Resources: Circuit Board Replacement. Timer Switch Replacement. On-Off Switch Re-

placement. Case Removal.

*** Unplug the grinder from power supply ***

www.baratza.com sup[email protected]m rev. 6/5/2019

ver. 1.0

Remove the case using the Case Removal guide.

US Power Cord (SKU: 6300)

Flat Torx-10

Phillips

OPTIONAL: label wires with tape

or stickers before proceeding for

ease of reassembly

If your unit has an on-off switch,

an additional wire is required

which you can request directly.

Pick

Pliers

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 2

These screws may be

Phillips or Torx size

10. If you do not have

Torx, use 2mm hex.

Lift the safety interlock

switch up and off of its

posts. Let it hang to the

side of the grinder.

Remove the three screws

securing the gearbox to

the chassis.

Lift the motor/gearbox

assembly out of the

chassis and unplug the

grinder from the board.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 3

For units with on/

off switch, press into

terminal to release

wires. See On-Off

Switch Replacement

guide for clarication

Unplug the cables

leading to the timer or

on/off switch.

Unplug the power cord

connector from the

circuit board.

Remove the two screws

securing the circuit

board to the chassis and

remove the board itself.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 4

Secure the

switch by

hand and be

sure to pull

on the spade

clip to avoid

damage.

Remove the four feet at

the base of the unit to

expose screws.

Remove the four base

screws to separate the

base from the chassis.

One of the interlock

switch wires leads

directly to the power

cord. Unplug this wire

from the interlock switch.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 5

To release the power

cord strain relief, push

and hold a at head

screwdriver against a

side retaining clip to

disengage it.

Push the strain relief

down to lock the

retaining clip in a

disengaged position.

Repeat on the other two

releases until the strain

relief removes entirely.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 6

Pull the wiring harness

down and away from the

chassis.

If the new cord does

not have a strain relief

installed, re-use the relief

from the original cord.

Locate corner of the

strain relief where it

opens.

Using a at head

screwdriver, push in and

down to release the clip

and open the strain relief.

Position the strain relief

on the new cord and

squeeze shut (pliers may

be needed).

OPTIONAL

OPTIONAL OPTIONAL

OPTIONAL

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 7

The power cord has a

molex connector. The

replacement will only

have one wire installed to

the connector. There are

two other wires which

must be installed.

To remove the cables

from the old connector,

insert a narrow tool into

the exposed slot and

pull gently on the related

cable.

All three snaps engaged

Pull the wires of the new

power cord through the

chassis until the strain

relief snaps into place.

VirtuosoEncore

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 8

Connect the long black

wire to the interlock

switch.

Return the circuit board

by securing the two

mounting screws.

Plug the power cord

connector into the circuit

board.

Insert that cable into the

new connector until it

clicks.

For machines with an

on-off switch, repeat this

process for the other

cable.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 9

Connect the remaining

wires to the timer or on/

off switch.

*for wiring reference,

see On-Off Switch

replacement guide*

Install the base, 4 screws

and 4 feet.

Install the gearbox/

motor assembly and

plug the motor cable

into the board.

www.baratza.com sup[email protected]m rev. 6/5/2019

Pg. 10

Ensure that

wires are rmly

connected, and

actuator faces

inward.

Secure the three screws

which mount the

assembly to the chassis.

Return the safety

interlock switch to its

posts.

Reinstall the case and

knob to return the grinder

to operation.

If you encounter any

issues or have questions

about this guide, contact

support@baratza.com

Route safety

interlock wire

under gearbox

Other manuals for Encore

This manual suits for next models

Other Baratza Coffee Grinder manuals

Baratza

Baratza SETTE 30 User manual

Baratza

Baratza Vario W+ User manual

Baratza

Baratza Maestro Installation and user guide

Baratza

Baratza Preciso User manual

Baratza

Baratza Solis Maestro User manual

Baratza

Baratza Encore User manual

Baratza

Baratza Vario W+ User manual

Baratza

Baratza Encore User manual

Baratza

Baratza Vario User manual

Baratza

Baratza VIRTUOSO+ User manual

Baratza

Baratza Maestro Installation and user guide

Baratza

Baratza SETTE 30 User manual

Baratza

Baratza Maestro Installation and user guide

Baratza

Baratza Preciso User manual

Baratza

Baratza Vario+ User manual

Baratza

Baratza Virtuoso User manual

Baratza

Baratza Vario User manual

Baratza

Baratza Encore Installation guide

Baratza

Baratza Forté AP User manual

Baratza

Baratza Encore User manual

Baratza

Baratza Encore User manual

Baratza

Baratza SETTE 270W User manual

Baratza

Baratza Encore User manual

Baratza

Baratza VIRTUOSO+ User manual

Popular Coffee Grinder manuals by other brands

SOLAC

SOLAC All4Coffee MC6253 Instructions for use

Teesa

Teesa TSA4011 owner's manual

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 instruction manual

tomado

tomado TM-1287 instruction manual

Aicok

Aicok CG9220 instruction manual

Zelmer

Zelmer ZCG7925 user manual

Isomac

Isomac ROBY Use and maintenance manual

Eldom

Eldom Dott MK60 Operating instruction

Bunn

Bunn SAFETY-FRESH 1 GPR operating instructions

FAMITEC

FAMITEC BOLD user manual

Santos

Santos SC55 User and maintenance manual

Lumme

Lumme LU-2601 user manual

TREVIDEA

TREVIDEA Girmi MC02 user manual

Eureka

Eureka Zenith E User handbook

Bunn

Bunn HVG OPERATING & SERVICE MANUAL

SEVERIN

SEVERIN KM 3878 Dimensions

Bosch

Bosch SOLUTION 6000 owner's manual

Imetec

Imetec MACINACAFFE operating instructions