5
Pairing your remote control to a Bluetooth product
To operate a Bluetooth product,
you must first make sure that your
remote control is paired to the
product. BeoRemoteOne then
typically synchronises various
settings with the paired products
and thereby eases recognition and
browsing of sources and functions
in the display.
Pairing is not used for IR based
products. Consequently, you should
skip the pairing process during first-
time setup. For information about
Option programming of IR
products, see page 19.
When pairing BeoRemoteOne to a
Bluetoothproduct, the product provides a
product name to be used in the remote
control display. Settings for sources and
dierent functions are then typically set in
the Bluetooth product, instead of in the
remote control.
You can pair your remote control to eigth
Bluetooth products, and a Bluetooth product
can be paired to five Bluetooth remote
controls.
Pair or unpair a remote control
Depending on your setup, dierent settings
are required for interaction to succeed,.
However, common to all setups with a
Bluetooth product is that you need to pair
your remote control with the product to be
able to operate it.
First-time setup of your remote control
Before setting up your remote control, make
sure your product is connected to the mains,
and if it is already in use, you must also open
your Bluetooth product for pairing.*
Put in fresh batteries in your
remote control** and place
yourself in front of the product
After timeout of a welcome
screen in the display, set the
preferred language
If a Bluetooth product is
opened for pairing, pairing
takes place.***
Your remote control is now
ready for use
*See the guide for your Bluetooth product for
information on how to open the product for
pairing.
**See the Quick guide enclosed with your
remote control or product for information on
how to insert batteries.
***If your Bluetooth product is not opened
for pairing, your remote control enters
pairing mode and when your Bluetooth
product is then connected to the mains and
opened for pairing, pairing takes place. If
your product is not a Bluetooth product,
select Skip pairing.
The remote control remains in pairing mode
even though the display switches o.
...
Continued…
Pairing
