BALDR B0201WST2H2 User manual

with Thermometer and humidity

Weather Station

We thank you for your purchase of BALDR Weather Station with Thermometer and Humidity. It has been

designed and constructed using innovative components and techniques to enable the perfect display of time，temperature and humidity by this device. Please read the instructions carefully to become familiar with the

properties and functions before you use the unit.

USER MANUAL

For the start-up of this device you require: Main unit by 2xAAA batteries

MODEL: B0201WST2H2

Sensor by 2xAAA batteries

OVERVIEW

MAIN UNIT

LCD DISPLAY

1. Weather Forecast

2. Outdoor Temperature

3. Indoor Temperature

4. Current Time

5. Outdoor Sensor Channel

6. Outdoor Humidity

7. Indoor Humidity

8. Calendar and Moon Phase

9. Touch Buttons

OUTDOOR SENSOR

FEATURES

GETTING STARTED

1. Indoor and outdoor temperature (ºC/ºF Selectable)

2. Indoor temperature range: 0℃~50.0℃（14℉~122℉）3. Outdoor temperature range: -20℃~65℃（-4℉~149℉）4. Indoor and outdoor humidity range: 20%~95%

5. Records max/min temperature and humidity (in and out)

6. Weather forecast for 5 modes: Sunny, Sunny To Cloudy, Cloudy, Rainy,

Stormy

7. RF Channel For Outdoor Sensor

8. Alarm and snooze function

9. Time display in 12/24H

10. White backlight lasts for 10 seconds after pressing the “Snooze/Light”

button

11. 100 meters wireless transmitter in open area

12. Moon phase and calendar function

MAIN UNIT INSTALLATION

1. Remove the battery compartment cover.

2. Insert 2x AAA batteries matching the polarity (+and-).

FUNCTION BUTTONS

1. Remove the battery compartment cover.

2. Insert 2xAAA batteries matching the polarity (+and-).

After power on, LCD will full display for 1 second, and in the meanwhile hygr-

ometer will detect indoor temperature & humidity, and then it will start to rec-

eive outdoor signal which lasts for max 3 minutes

SENSOR INSTALLATION

Initialize

Function

Operation

MEM/▼AL/SET CH/▲SNOOZE/LIGHT

Standard

Time

Mode

Press

Check

Max/Min

Record

Switch to

Alarm Time

Mode

Switch channel Backlight on

Hold ------

Enter Into Time Set

Mode

re-registration -----

Alarm

Time

Mode

Press Alarm on/off

Switch to

Standard Time

Mode

Switch channel Backlight on

Hold ------ Enter Into Alarm

Time Set Mode

re-registration -----

Time Set

Mode

Press Decrease 1

step Confirm and go next Increase 1 step Backlight on

Hold Decrease in 8

steps ------ Increase in 8

steps -----

Alarm

Time Set

Mode

Press Decrease 1

step Confirm and go next Increase 1 step Backlight on

Hold

Decrease in 8

steps ------

Increase in 8

steps -----

Alarm

Mode

Press Alarm off Alarm off Alarm off Snooze Function

Hold ------ ------ ------ Alarm off

1. Press and hold “AL/SET” button to enter into time setting; the setting data

will be flashing in 1Hz.

2. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM/

▼” or “CH/▲” button will quickly change the data by 8 steps.

3. The setting order is: Year →Month →Day →Weekday Language →Time

zone →12/24H →Hour →Minute →C/F →Exit.

4. There are 7 languages selectable for weekday display: FR, NE, ES, DR, EN,

GE, IT (French, Dutch, Spanish, Denish, English, German, Italian)

5. If no operation for 20 seconds, it will automatically save and exit setting.

TIME SET

1. On normal time display mode, press “AL/SET” button to switch to alarm

display mode.

2. Press and hold “AL/SET” button to enter into alarm time setting mode.

3. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM

/▼” or “CH/▲” button will quickly change the data by 8 steps.

4. The setting order is: Hour →Minute→Exit.

5. On alarm display mode, press the “MEM/▼” button to turn on/off the alarm.

6. If no operation for 20 seconds, it will automatically save and exit setting.

ALARM SET

1. When alarm is ringing, press “SNOOZE/LIGHT” button to activate snooze

function. And the alarm will ring again in 5 minutes.

2. Press and hold “SNOOZE/LIGHT” button for more than 3 seconds will

stop the alarm; or press any other button to stop the alarm. And the

alarm will restart next day.

3. The ascending “Bibi” alarm sound will last for 2 minutes if no operation.

ALARM AND SNOOZE

1. Press “MEM/▼” to have maximum temperature and humidity, the value

will display 5 seconds.

2. Press “MEM/▼”second time to have the minimum temperature and hu-

midity, the value will display 5 seconds.

3. Press “MEM/▼”third time will return to standard mode.

MAX AND MIN RECORD

OUTDOOR CHANNEL

WEATHER FORECAST

4. Press and hold “MEM/▼” will clear the max and min record and reactivate

the memory.

5. Normally, the Max and Min record will update every 24 hours on 0:00.

The weather forecast icon will show after power on. There are 5 kinds of

weather modes: Sunny, Sunny To Cloudy, Cloudy, Rainy, Stormy.

The weather icon displays are based on the hourly calculation of indoor/

outdoor temperature and humidity data.

The forecast is for next 12-24 hours.

MOON PHASE

The moon phase will be changed when calendar changes:

1. Hygrometer will auto receive outdoor signal after power on, the receiving

status will last for max 3 minutes, the receiving antenna signal will flash,

if no signal received in 3 minutes, will not exist and stop receiving outdoor

signal

2. Press “CH/▲” button to change the channel

3. The setting order is CH1 --> CH2--> CH3 -->Channel scan (from CH1 to

CH2 to CH3, 10 seconds intervals)

4. Press and hold “CH/▲” button for more than 3 seconds to manually enter

into RF re-registration, press and hold “CH/▲” button for 3 seconds again

will exit RF registration

5. The current outdoor temperature and humidity data will be cleared during

re-registration status

6. Remark: if hygrometer has received outdoor data successfully before, in

next 60 minutes if lost signal, the hygrometer outdoor area will display “--.--”

BALDR provides a 1-year limited warranty on this product against manuf-

acturing defects in materials and workmanship.

Warranty service can only be performed by our authorized service center.

The original dated bill of sale must be presented upon request as proof of

purchase to us, or our authorized service center.

The warranty covers all defects in material and workmanship with the fol-

lowing specified exceptions:(1) damage caused by accident, unreasonable

use or neglect (including the lack or reasonable and necessary maintena-

nce); (2) damage occurring during shipment (claims must be presented to

the carrier); (3) damage to, or deterioration of any accessory or decorative

surface;(4) damage resulting from failure to follow instructions contained in

your owner’s manual.

This warranty covers only actual defects within the product itself, and does

not cover the cost of installation or removal from a fixed installation, normal

set-up or adjustments, claims based on misrepresentation by the seller or

performance variations resulting from installation-related circumstances.

To receive warranty service, the purchaser must contact with BALDR nom-

inated service center for the problem determination and service procedure.

Thank you for choosing BALDR products!

PRECAUTIONS

WARRANTY

Do not clean any part of the product with benzene, thinner or other

solvent chemicals. When necessary, clean it with a soft cloth.

Never immerse the product in water. This can cause electrical shock

and damage the product.

Do not subject the product to extreme force, shock, or fluctuations in

temperature or humidity.

Do not tamper with the internal components.

Do not mix new and old batteries or batteries of different types.

Do not mix alkaline, standard or rechargeable batteries with this product.

Remove the batteries if storing this product for a long period of time.

Do not dispose of this product as unsorted municipal waste. Collection

of such waste separately for special treatment is necessary.

www.baldr.com

service@baldr.com

Other manuals for B0201WST2H2

Table of contents

Other BALDR Weather Station manuals

BALDR

BALDR B0360WST2H2PR-V2 User manual

BALDR

BALDR B0360WST4H4PR User manual

BALDR

BALDR B0359WST4H4PR User manual

BALDR

BALDR B0341WST2H2-V3 User manual

BALDR

BALDR B0389WST2H2-V1 User manual

BALDR

BALDR B0341WST2H2-V3 User manual

BALDR

BALDR B0340ST2H2 User manual

BALDR

BALDR B0359WST2H2PR-V1 User manual

BALDR

BALDR B0359WST4H4PR User manual

BALDR

BALDR B0360WST2H2PR-V2 User manual

BALDR

BALDR B0359WST4H4PR User manual

BALDR

BALDR B0359WST2H2PR User manual

BALDR

BALDR B0359WST2H2PR User manual

BALDR

BALDR B0340WST2H2R-V8 User manual

BALDR

BALDR B0359WST4H4PR User manual

BALDR

BALDR B0340WST2H2R-V7 User manual

BALDR

BALDR B0359WST4H4P User manual

BALDR

BALDR B0340WST2H2R-V7 User manual

BALDR

BALDR B0359WST2H2R User manual

BALDR

BALDR B0359WST2H2PR User manual

BALDR

BALDR B0359WST2H2PR-V1 User manual

BALDR

BALDR B0360WST4H4PR User manual

BALDR

BALDR B0360WST2H2PR-V2 User manual

BALDR

BALDR B0389WST2H2 User manual

Popular Weather Station manuals by other brands

Auriol

Auriol AHFL 433 A1 operating instructions

NexSens

NexSens G2-HYDROMET quick start

Hyundai

Hyundai WS 2202 instruction manual

IROX

IROX HBVR761 UV-X user manual

La Crosse Technology

La Crosse Technology C86371 instruction manual

ADE

ADE WS 1711 operating instructions

Auriol

Auriol z29592 Operation and safety notes

Auriol

Auriol 296289 Operation and safety notes

Hyundai

Hyundai WS 2266 instruction manual

La Crosse Technology

La Crosse Technology WS-2210 Operation manual

La Crosse Technology

La Crosse Technology WS-811561 manual 

Ventus

Ventus W177 owner's manual

National Geographic

National Geographic VA Colour RC instruction manual

Renkforce

Renkforce 1208067 operating instructions

Levenhuk

Levenhuk Discovery Report WA40 quick start guide

Instant Transmission

Instant Transmission MA 10410 instruction manual

Lutron Electronics

Lutron Electronics PHB-318 Operation manual

WAREMA

WAREMA EWFS Weather station eco Operating and installation instructions