Balboa SpaTouch series User manual

2017 Spa Touch Control Panel with 2000, 2100 controllers

(Spa Owner’s Manual insert)

P.N. 7876D

July 2017

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

spaTouch™ Icon Driven Control Panels

Balboa Water Group BP Series Systems

User Interface and Programming Reference

The spaTouch™ Icon Driven panel is compatible with all BP systems that already support the TP800 and/or the TP900.

If this panel is used with a system that supports only the TP400 and/or TP600, many screens will work correctly,

and the spa screen will try to display all of your equipments, but in some cases it may not display correctly.

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Main Screen

Spa Status

Important information about spa operation can be seen on the Main Screen.

Most features, including Set Temperature adjustment, can be accessed from this screen.

The actual water temperature can be seen, and the Set Temperature can be adjusted (see page 5).

Time-of-Day, Ozone and Filter status is available, along with other messages and alerts.

The selected Temperature Range is indicated in the upper left corner.

The Spa Equipment Control Icon will spin if any pump is running.

A Lock icon is visible if the panel or settings are locked.

Note: After 30 minutes* the display will automatically go into sleep mode, which

turns the display off. This is normal operation. Touch anywhere on the screen to

wake the panel up.

*The actual number of minutes can be customized. See page 20.

ICON Speciﬁcations

1. H = High Temperature Range

2. R = Ready Mode

3. F1 = Filter Cycle 1 Running

4. O3 = Ozone Running

5. C = Cleanup Cycle

6. Wi-Fi Signal Indicator

7. Lock Indicator Icon

8. Invert Screen

9. Light Icon = Turns On/Off

10. Music Icon = Press To Enter Music Screen

11. Message Waiting Indicator

12. Set Temperture Up

13. Spa Equipment Control Icon

14. Temperature Scale (F/C)

15. Current Water Temperature

16. Settings Icon

17. Heat Indicator

18. Set Temperature Down

Note: Refer to page 3 for additional info.

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Main Screen – Continued

ICON Speciﬁcations

1. = High Temperature Range. = Low Temperature Range.

2. = Ready Mode. = Ready And Rest Mode. = Rest Mode.

3. = Filter Cycle 1 is running. = Filter Cycle 2 is running. = Filter Cycles 1 and 2 are both running.

4. = Ozone is Running. If you don’t see the icon that means the Ozone is OFF.

5. = Cleanup Cycle is Running. Note: Not all systems that can run a Cleanup Cycle display this icon.

6. = Wi-Fi icon just indicates that the Wi-Fi link is connected. It does not indicate signal strength. Note: Not all systems that

support Wi-Fi display this icon.

7. Lock Icon:

When displayed, indicates the panel is in a locked mode. To unlock or lock a setting or panel lock, ﬁrst press the corresponding icon on

the Lock Screen, then press and hold the word “Lock” for 5+ seconds until the text and icon change to the opposite state.

There are 2 lock icons that can be shown on the title bar of most screens. A tall skinny one representing a settings lock is applied.

It is shown on screens that are affected by the settings lock. And the standard lock icon Padlock which represents the Panel being

locked. If both settings and panel are locked, only the panel lock will show since the settings lock doesn’t do much in that situation.

When the panel is locked, the Settings Screen will only show items not affected by that lock (System Info and Lock Screens).

8. = Invert (or ﬂip) Screen.

9. = Lights is turned ON. = Light is Inactive. = Light is Disabled.

10. = Music is Active. = Music is Inactive. = Music is Disabled.

11. Message Waiting Indicator:

The Message Waiting Indicator will show one of the following icons:

= Fatal error (Spa can’t function until it’s ﬁxed)

= Normal Error or Warning

= Reminder Message

= Information Message.

Touch the Indicator to go to a Message Screen which shows the message.

Some messages will include the “Call for Service” text as it requires a service technician to ﬁx the problem. If the panel is locked

and a message alert appears, you will be taken to the Lock Screen (where you will need to Unlock the panel) before you can clear the message.

Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the System Information Screen to allow for

troubleshooting over the phone or for a ﬁeld service tech to better understand what is going on. Exiting the System information

Screen will take you back to the Message Screen in that situation.

12. Adjust set temperature higher.

13. = Spa Equipment Control Icon. Brings up a screen where the spa jets, blower or other equipment can be controlled.

While on the Spa Equipment Screen, you can press a Jets button once for low speed, and if conﬁgured press it again for high speed.

= Jet is Inactive. Indicates if a pump is running or not.

14. Indicates if the temperature is in = Fahrenheit or = Celsius.

15. Current water temperature if or is solid; set temperature if or is ﬂashing.

16. Setting Icon. = Settings is Active. = Settings is Inactive (when the panel is locked). Takes you to Settings Screen

17. Different animation sequences, including blinking, may indicate different stages of heating.

18. Adjust set temperature lower.

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Main Screen – Continued

Navigation

Navigating the entire menu structure is done by touching the screen.

The three screen selections indicated below can be selected. Touch one of these to enter

a different screen with additional controls.

Most menu screens time out and revert to the main screen after 30 seconds of no activity.

Messages

At the bottom of the screen, at certain times an indicator may appear showing that a message is waiting. Touch this

indicator to go to the Message Display Screen. On that Screen some of the messages can be dismissed. For more on the

Message Display Screen, see pages 25-30.

Music

Spa Equipment

Settings

A Warning Message is waiting

BP1500 Tech Sheet

Power Requirements (D):

240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)

4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Set Temperature

Set Temperature

Press Up or Down once to display the Set Temperature (indicated by a ﬂashing ºF or ºC, plus a change in color of the tem-

perature). Pess Up or Down again to modify the Set Temperature. The Set Temperature changes immediately.

If you need to switch between High Temperature Range and Low Temperature Range you need to go to the Settings Screen.

Press-and-Hold

If Up or Down is pressed and held, the temperature will continue to change until you stop pressing,

or until the Temperature Range limits are reached.

Set Temperature Up

Set Temperature Down

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

The Spa Screen

All Equipment Access

The Spa Screen shows all available equipment* to control. The display shows icons that are related to the equipment

installed on a particular spa model, so this screen may change depending on the installation.

The icon buttons are used to select and control individual devices.

Some devices, like pumps, may have more than one ON state, so the icon will change to reﬂect the state of the

equipment. Below are some examples of 2-speed Pump indicators.

Jets HighJets LowJets O

If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming Mode,

the Circ Pump cannot be controlled directly.

*One exception: The Main Spa Light is not shown on the Spa Screen; it is only shown (and controlled) on the Main Screen.

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

Common Buttons

Values Increment/Decrement

If an Up or Down button is shown and pressed when on an editing page, and a value has been selected (highlighted),

the value can be incremented by pressing the up arrow or decremented by pressing the down arrow.

Selected Value

Save

Increment

Back

Decrement

Invert

Will appear on upper right on all screens.

Invert

169:

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

Common Buttons – Continued

Exiting Screens

The Back button is on every screen except the Main Screen, the Priming Mode Screen are a Message Display Screen.

When you see only this button, or this button plus an Inactive Save Button, it means Back or Exit. It appears

on editing screens before you have changed any value, as well as on all other screens.

When you see both the Back button and an Active Save button, the Save button will Save, while the Back button will Cancel.

If the screen times out due to no activity it will act like Cancel.

Back

(Functions as Cancel)

Inactive Save

Button

Active Save

Button

Back

9:15am

42281_A 11-19-15

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

Common Buttons – Continued

Page Right/Left