Ayra ERO 075 User manual
ERO 075
LED Spot Moving Head
User Manual
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
Introduction
Thank you for purchasing the ERO 075 moving head. This compact and versatile device is packed full of the
latest technology and will add an extra special element to any occasion. This manual provides all the
information you need to know a out the product efore you start using it.
We advise that you read this user manual in its entirety efore unpacking the contents of the ox, so that you
are familiar with all of the functionality that this product has to offer. Please e sure to check that all of the
parts and accessories listed elow under 'Box contents' are included in the package. In the event that the
ERO 075 does not function properly, or if you have any issues while operating it, please remove the plug
from the power socket and contact your retailer for assistance.
Box contents
- ERO 075 LED moving head
- suspension racket + mounting hardware
- safety-eye olt
- power ca le IEC C13 to Schuko, 1,5 mm²
Please inspect the device and the included accessories.
Should you discover that either the device or one or more of the included parts have een damaged or
rendered defective while in transit, please contact your retailer directly.
Please note that the pictures in this user manual serve illustrative purposes only and may differ from the
actual product.
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
Safety Instructions
Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the device or the
included accessories e damaged, please contact your dealer for more information.
- Ensure that the device is in good working condition and is safe to operate. Please follow the advice and
instructions as they are descri ed in this user manual.
Damage caused y misuse and/or modifications made to the device are not covered y the warranty.
This device does not contain any parts that can e repaired or replaced y the user. Should maintenance or
repairs e necessary, they must e handled y a qualified technician.
The light source of this device is not replacea le. If the light source no longer functions, the entire device
needs to e replaced.
Important information regarding safety and health
- Do not remove any la els or stickers from this device.
- Do not leave any ca les lying around.
- The device should not e opened up, and any hardware or software that may e present should not e
modified.
- To achieve optimal performance, inputs on the device should not e fed with a signal higher than
necessary.
- The device should only e used indoors; contact with water, rain and moisture should always e avoided.
Do not place any o jects containing liquid on top of the device.
- Remove the device from any near y flames or heat sources; do not place it near flamma le fluids, gasses
or o jects.
- Disconnect this device from a power source if it will not e used for a longer period of time, if maintenance
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
WARNING!
Keep this device away from moisture, water and rain to avoid the chance of electric shocks.
WARNING!
Only connect this device to a suitable power socket. This device functions on a specific power
voltage. If it is plugged into a power socket with a different voltage, it could result in permanent
damage and even dangerous situations such as fire or electric shocks.
WARNING!
Be careful when operating this device. Touching the wires that are connected to the mains,
inside or outside the device, could result in electric shocks.
is necessary, or if it needs to e cleaned.
- Do not pull on the ca le to remove a connector, as it can cause damage.
- Do not use any ca les other than the ones descri ed in this manual. Do not use defective ca les. Please
contact your dealer if the included or necessary ca les do not function properly with this device.
- Only use this device with a sta le AC power supply.
- Only use this device with power from a grounded power source.
- In the event that the device is exposed to extreme temperature changes (e.g. transported through a cold
outside environment into a warm indoor environment), it should not e turned on until it has reached room
temperature. This is necessary to prevent moisture from forming in the device, which could lead to electric
shocks.
Guidelines and operation of this device
- This device is intended for use y professionals on stage, in theatres, in clu s, and in similar entertainment
locations.
- This device is not suita le for use y children, and should always e operated y an adult.
- This device is designed to create light effects for entertainment purposes. It is not suita le for household
illumination.
- This device may only e used in a suita le environment where no damage to the device can occur. Do not
use the device in moist or dusty environments such as:
- indoor swimming pools where chlorine is used
- eaches where there is sand and salt
- outdoors
- indoors in spaces where intense heat sources are present, or where it reaches temperature levels
that would e considered uncomforta le for a person
- Avoid impact and collisions during use and transport. Do not transport the device while it is in use. Avoid
using excessive force when installing and operating the device.
- The user should ecome familiar with the functions of this device efore using it.
- Should the device not e used in the manner descri ed in this user manual, damages or even injuries could
occur. Ayra cannot e held responsi le for any injuries or damages that occur as a result of improper use of
this product.
Storage and transport
- This product was designed for mo ile use. Please only transport the device in the original packaging, or in
a flight case with a suita le foam inlay.
- This device was not designed for permanent (24/7) use. The expected lifespan of the device will not e
affected y occasionally turning the device off. Disconnect the device or turn off the power when it is not
actively in use.
- If the device will not e used for a longer period of time, it should e disconnected and stored in a dust-free
environment.
- Do not expose the device to extreme temperature differences.
Housing
- Inspect the device's housing frequently, and always just efore use. Avoid operating the device if there are
large dents or cracks, or if screws are missing. Do not use the device if the housing is not in good condition.
Contact your dealer or a qualified technician if you are unsure a out the state of the device.
- Check the device and the screws for corrosion. Corrosion must not e present on this device. Contact your
dealer or a qualified technician if you find any corrosion on the screws.
Every power and signal connector should e securely attached. Do not use the device if the connectors are
not secure.
- Avoid dust and dirt uild-up. Clean the device once a month y disconnecting it from the power supply and
wiping it down with a dry or slightly moist cloth. If the device is used frequently, the cleaning intervals should
increase.
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
Symbol explanation
WEEE Ensure that this device is disposed of properly. This product falls under the WEEE
(Waste Electrical and Electronic Equipment) directive. The requirements of this directive apply
to all manufacturers and producers of electronic devices in the EU. Do not throw this product
away with regular ru ish. Please contact your local authority for more information a out how
to recycle and dispose of these products in your region. By recycling this product in the proper
manner, we can work together to ensure that we can continue to enjoy these kinds of
products and still protect the environment as much as possi le from pollution.
CE The CE logo indicates that this product meets the European norms and requirements to
which it must legally conform.
Only suitable for indoor use: this product was only designed for indoor use. The maximum
environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit).
Contact
Ayra professional lighting products
Verrijn Stuartweg 18
4462 GE Goes
The Netherlands
Please do not send any products to this correspondence address.
Should you wish to send in a product for repairs or for a refund, please contact your dealer for an R A
request (Return erchandise Authorisation).
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
Overviw and use of this Device
1. Moving head with light output via lens
2. Ru er feet
3. LED display with menu uttons
4. DMX input via 3-pin XLR
5. DMX output via 3-pin XLR
6. Power input with fuse holder
7. Body-fan
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
4 5 67
1
3
2
Operation and Mounting
To activate the device, plug it into a mains socket. Once it's connected to an active power source, it will turn
on automatically.
During start-up, the device’s display will indicate its start-up status and can’t e used. The moving head may
vi rate as it cali rates the stepper motors. Once the device has fully started up, it will jump to the last-used
mode. Operation modes and other settings shown on the display can now e adjusted or changed y means
of the menu uttons.
The ERO 075 has a colour display for access to the various operating modes, as well as user adjusta le
settings.
Should the device detect a DMX signal, it will automatically switch to DMX mode and will display the last-
used address. For new devices, this will normally e DMX address 001. Of course, you can change the DMX
address via the display using the menu uttons.
Using the display and the menu uttons, you can adjust the functions and settings of the device. Press
'Enter' to confirm an adjustment or select a function, use ‘Up’ and ‘Down’ to change amounts and ‘Menu’ to
go ack to the menu.
CONFIRMING OPERATING MODES
Please note If you want to use the device in automatic or sound-controlled mode, first confirm the action y
adjusting the value. Next, use the ‘Up’ and ‘Down’ arrows to navigate to the ‘X’ at the top of the display and
press ‘Enter’ to return to the main menu. Only then will your selected actions e executed.
Confirming with ‘Enter’ and returning to the main menu via the ‘Menu’ utton will only result in returning to
the main menu, without saving and executing your desired actions.
The menu is divided into segments and contains the following options and functions
ADDR
With this function, you can determine the DMX start address of the device. Set it channel 001, and the
device will read DMX channel 1. Set it to channel 003, then the device will read DMX channel 3, etc.
As soon the DMX address is encircled in lue, it can e changed y pressing ‘Enter’ and using the navigation
uttons to enter the correct address. Press ‘Enter’ to confirm or press ‘Menu’ to cancel.
This menu also contains ‘prev’ and ‘next’ functions. These are convenient when you’re working with multiple
devices. When you press ‘prev’ or ‘next’, 14 channels are moved forwards or ackwards so the DMX index
can e automatically adjusted. This way, you’re a le to link device 1 with channel 1, device 2 with channel
15, etc.
The ‘CHAN’ function is normally used to access another DMX channel mode. This product, however,
supports no DMX modes other than the 14-channel DMX mode.
MODE
This menu allows you to fully customise your moving head’s operating mode using the following functions
and values:
- Auto mode: Auto, Sound, Scene
- Scene mode: Auto, 1-10
- M/S choose: Master, Slave, Scene
- X/Y speed: 000-009
- Go o speed: 000-009
- Color speed: 000-009
- Go o rot. speed: 000-009
- Prism speed: 000-009
- Stro e speed: 000-009
- Position: Auto, 01-05
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
DISP
The ‘DISP’ mode lets you change the various display settings:
- Language: Chinese, English
- Screen saver: Mode 1-3
- Screen rotation: Forward, Auto, Reverse
- DMX indication: Mode 1-3
- Screen light: 000-010
SCENE
The ‘Scene’ mode allows you to activate fixed positions and functions of the moving head in order to create a
static light image that can e recalled at any time. This is a practical feature for situations that require static
ut accurate lighting.
There are a total of 10 customisa le scenes, which can e used in play mode to activate a sound-controlled
programme that alternates etween scenes, depending on the time set per scene.
Naturally, it’s also possi le to continuously and statically highlight a specific o ject or point onstage.
The ‘SCENE’ mode allows control over:
- Scene-selection
- Scene-time (in seconds)
- Pan/Pan fine
- Tilt/Tilt fine
- Pan/Tilt speed
- Dimmer (255 = fully open)
- Stro e (255 = fully open)
- Colour
- Go o
- Go o rotation
- Prisma
- Special mode (e.g. sound-controlled mode)
- Focus
- Reset
All changes made to these functions are instantly applied so that each function can e aligned perfectly with
the next one to achieve the desired effect(s).
STAT
The ‘STAT’ mode displays a num er of relevant statistics regarding the moving head such as used firmware,
LED operating times, total operating time, possi le error logs, etc.
This makes planning maintenance intervals and trou leshooting pro lems even easier.
In the overview you’ll find:
- Step motor info (current values)
- Error log
- Fixture status
- Firmware version
- LED operating time
- Total operating time
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
ADVA
The Advanced mode contains more additional functionalities that are usually exclusively used y product
specialists.
- Pan invert (invert horizontal movement)
- Tilt invert (invert vertical movement)
- Pan / Tilt auto-correction (automatic correction in case of sudden movement)
- Pan offset (motor correction of starting point for horizontal movement)
- Tilt offset (motor correction of starting point for vertical movement)
- Data hold (remem er the last received signal in case of signal loss)
- Reset (resets the device after confirmation)
Operating Modes
The following overview clearly explains the different operating modes, supported by the
aforementioned menu functions
Auto
In automatic mode, choose one of the operating modes where the device is not dependent on external
factors (such as a sound-controlled signals or the presence of noise). Choose one of the asic programs and
set the options such as the switching speed or the intensity correction, if desired.
Sound
When in Sound-controlled mode, the device's internal microphone detects the music and reacts to the eat.
The device will move in sync with the music and provide an automated light show.
When there is no music for the device to detect or when only high frequencies are audi le, the device will
wait in its last triggered position. As soon as the microphone detects music again, it will resume the
automated program and follow the eat.
Slave
In Slave mode, you can daisy-chain multiple devices of the same type so they all function a specific way.
This way you can coordinate your light show y having multiple separate devices moving the same way
instead of all different directions, which can e chaotic. Basically, you can connect an unlimited num er of
slave devices to a master device, ut a DMX ooster is required in etween. Generally speaking, you can
connect up to four armatures together without the need for a DMX ooster.
Be aware that when you attempt to connect devices of different types and rands, they may ehave
strangely and you may not get the desired effect ecause certain functions are linked to the wrong channels.
This is true of DMX lighting of all rands and types.
Always ensure that the first device in your circuit is set as the Master device and that it is executing the
desired programme. Any other devices can su sequently e set to Slave mode one y one, so they shall
receive the commands from and emulate the Master device’s programme.
DMX
The DMX mode is the most comprehensive way to maintain ultimate control over all the functions this device
has to offer. It ena les you to determine exactly how many functions you want to control via the DMX
controller or DMX software.
Using the 14 DMX-channels, it’s possi le to control the functions of the moving head via an external lighting
desk to create and trigger even more complex programmes that allow multiple (different) armatures to work
together.
This device can e set to various channel modes so the channel layout, which is shown elow, corresponds
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
perfectly with your DMX circle layout, as well as with the functions you will e using.
14CH mode
CH Function Value
1 Pan-position min-max 000-255
2 Pan-position fine min-max 000-255
3 Tilt-position min-max 000-255
4 Tilt-position fine min-max 000-255
5 Pan/tilt speed, fast-slow 000-255
6 Dimmer 0-100% 000-255
7. Shutter/Stro e 000-007 Blackout
008-015 Open
016-131 Stro e, slow-fast
132-139 Open
140-181 Pulse, slow open, fast close
182-189 Open
190-231 Pulse, fast open, slow close
232-239 Open
240-247 Random Stro e
248-255 Open
8 Colour 000-015 Open
016-031 Colour 1
032-047 Colour 2
048-063 Colour 3
064-079 Colour 4
080-095 Colour 5
096-101 Colour 6
102-111 Colour 7
112-127 Colour 8
128-191 Rain ow effect clockwise fast-slow
192-255 Rain ow effect counter-clockwise slow-fast
9 Go o 000-007 Open
008-015 Go o 1
016-023 Go o 2
024-031 Go o 3
032-039 Go o 4
040-047 Go o 5
048-063 Go o 6
064-073 Go o 1 shake
074-082 Go o 2 shake
083-091 Go o 3 shake
092-100 Go o 4 shake
101-109 Go o 5 shake
110- 127 Go o 6 shake
128-129 Go o scroll effect, clockwise, fast-slow
190-193 Stop
194-255 Go o scroll effect, anti-clockwise, slow-fast
10 Go o rotation 000-127 Go o index
128-189 Rotation clockwise, fast-slow
190-193 Stop
194-255 Rotation anti-clockwise, slow-fast
11 Focus 000-255
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0 Aanmaakdatum en initialen auteur: 21-09-2019 RV Revisiedatum en initialen auteur: -
This manual suits for next models
1
Table of contents
Other Ayra Dj Equipment manuals
Ayra
Ayra ITA 350RG User manual
Ayra
Ayra ERO 540 User manual
Ayra
Ayra ERO 704 User manual
Ayra
Ayra Compar Kit FX1 User manual
Ayra
Ayra ALO 019 User manual
Ayra
Ayra DigiCon-1 User manual
Ayra
Ayra ITA 320RB User manual
Ayra
Ayra ERO Hexabeam User manual
Ayra
Ayra oso 240b mkii User manual
Ayra
Ayra TDC Seawave User manual
Ayra
Ayra ERO 101 User manual
Ayra
Ayra ERO Micro Spot User manual
Ayra
Ayra ERO Micro Beam FX User manual
Ayra
Ayra ALO 030 MKII User manual
Ayra
Ayra ERO 150BSW User manual
Ayra
Ayra TDC Disco Base User manual
Ayra
Ayra ERO 506 User manual
Ayra
Ayra ERO 404 User manual
Ayra
Ayra OSO Sunny 512 User manual
Ayra
Ayra OSO SCENE 48 User manual
