Axis JS007WQK User manual
1
MONITOR
- 2.4 GHz Digital 7” Wireless Colour LCD Monitor
- High Resolution
- Wide Angle Views
- Single ~ Quad Operation
- Recording Function up to 128GB
- Multivolt 12/24V Input
- Remote Control
CAMERA
- Heavy Duty Wireless CCD Camera
- 120° Wide Viewing Angle
- Night Vision
- IP69 Waterproof Rating
- 12/24V Operation
- 3dB Patch Antenna for Enhanced Range
2WARRANTY
YEAR
The JS007WQK is loaded with user-
friendly features and is ideal for use in
heavy duty vehicles. It comes with a
7”monitor that can display 1,2,3 or 4
cameras and includes one heavy-duty
camera that has an ingress protection
rating of IP69. It operates wirelessly
and can record up to 128G of action.
JS007WQK
HEAVY DUTY WIRELESS REVERSING KIT
7” LCD DIGITAL QUAD RECORDING MONITOR
with WATERPROOF CCD CAMERA
MULTIVOLT
12 24
CAMERA
IP69
WEATHER
PROOF
IR CAMERA2.4GHz WIRELESS1, 2, 3, 4 VIEW
• 7 Inch LCD Display
• High Resolution
• 120m Wireless Range
INCLUDED
Mounting Brackets:
- Dash Mount
- U-Shape Mount
Accessories:
- Sunshade
- Remote Control
- 3dB Patch Antenna for
Enhanced Range
2
CONTENTS
General...................................................................................................... 2
Technical Specifications.......................................................................... 3
Accessories................................................................................................ 4
Parts Identification.................................................................................... 5
Remote Control Operation......................................................................6
Basic Operation........................................................................................ 7
Menu.......................................................................................................... 9
Recording Time......................................................................................... 15
Trouble Shooting....................................................................................... 15
GENERAL
1. The device may be powered by a 12 or 24 Volt automotive battery or vehicle
electrical system.
2. Make sure all cables are connected properly. Observe polarity. Improper cable
connections may damage the monitor.
3. Do not expose the monitor to excessive heat, cold or moisture.
4. Do not watch the video while driving unless you are monitoring the rear view
camera display.
5. Remove the cable connections from the monitor before cleaning the device.
6. Use a mild household detergent and clean the unit with a slightly damp,
soft cloth. Never use strong solvents such as thinner or benzine.
7. Changes or modifications not expressly approved in this manual may void your
warranty and necessitate expensive repairs.
Note: Occasionally, a few highlights or dark pixels may occur on the LCD screen.
This is a common phenomenon in active matrix display technology and does not
necessarily indicate any defect or fault.
3
TECHNICAL SPECIFICATIONS
MONITOR
LCD Size: 178mm (7”)
Resolution: 800 x 3 (RGB) x 480
Contrast: 500:1
Brightness: 400 cd/m²
Viewing Angle: U: 50 / D: 70, R/L: 70
Dot Pitch: 0.0642(W) x 0.1790(H)
Aspect Ratio: 16:9
Image Orientation: Normal / Mirror / Flip / Mirror Flip
Inputs: 4 channels
Operating Frequency: 2.4 ~ 2.4835 GHz
Receiving Sensitivity: -89 dBm
Pairing to Camera/s Auto when camera activated
Compression Format: MPEG4
Transmit Output Power: 17 dBm
Modulation: 2.4G FSK/GFSK
Time Delay: 120ms
Transmitting Range: 120 Metres (approx)
Recording Media: Micro-SD / TF Card (not supplied)
Max SD Card Capacity: 128G
Cycled Recording: 1 ~ 4 channels
Signal System: PAL / NTSC
Power Supply: DC 10-32V
Power Consumption: 6W Max
2QERDUG/RXGVSHDNHU :
Operating Temperature: -20~+70°C
CAMERA
Image Device: 1/3” PC1089 Sensor
Viewing Angle: 120°
Signal System: PAL
Effective Pixels: 728 x 488
Sensing Area: 4.6228mm x 3.6112mm
Scanning System: 2:1 Interlace
Sync System: Internal
Horizontal Sync Frequency: 15.625 KHz
Vertical Sync Frequency: 50 Hz
S/N Radio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/50 (PAL) ~1/100,000 seconds
Operating Frequency: 2.4 ~ 2.4835 GHz
Receiving Sensitivity: -89 dBm
Line of Sight Range: 120 metres
Compression Format: MPEG4
Frame Rate: 25f/s
Transmit Output Power: 17 dBm
RF Bit Rate: 4Mbps
Minimum Illumination: 0 Lux (12 IR LEDs)
Night Vision Distance: 10m
Audio: Yes
Waterproof Rating: IP69
Power Supply: DC 8-36V
4
ACCESSORIES
U-Support Bracket Center Mount Bracket
Power Cable
IR Remote Control
Sun Shield
Angle Adjustment Screws
5
Power switch Volume increase Press OK button to enter
menu item or save user
settings.
Press OK button - shortcut
for start/stop recording.
Press OK button for 3
seconds - shortcut for
PAIRING.
Loudspeaker
Menu
Digital Color
LCD screen
Power indicator
Remote control
sensor
Light level sensor
Mounting bracket installation
Volume decrease
Select channels
Micro-SD /TF Card Slot
PARTS IDENTIFICATION
6
REMOTE CONTROL OPERATION
• MUTE - Press to select MUTE or enable sound
• POWER - (Power Switch) - Press to turn on/off monitor
• OK - Press to confirm the selected item. Press to start/exit the
recording process
• MENU - Press to show menu or exit menu
• VOL - Volume decrease and menu selection left
• VOL - Volume increase and menu selection right
• SEL - Jump key selector. Fast jump to the display mode
specified by SYSTEM. SETUP - JUMP KEY
• PAIR - Fast pairing when camera is activated
• SYS - PAL/NTSC TV system selector
• MIR - MIR-Flip selection
Press to select MUTE
or enable sound
Press OK button to enter
menu item or save user
settings.
Press OK button - shortcut
for start/stop recording.
Volume decrease and
menu selection left
Jump key selector. Fast
jump to the display mode
specified by SYSTEM
Press to turn on/off the
monitor
Press to show menu
or exit menu
Volume increase and
menu selection right
MIR- Flip selection
Fast pairing when
camera is activated
PAL / NTSC TV system
selector
7
Support attaching piece
Knob
BASIC OPERATION
1.1 Installation of Centre Mounting Bracket:
1. Adjust monitor level by sliding the support to the desired height.
2. Adjust the angle of the monitor and tighten the knob on the
centre mounting bracket.
1.2 Installation of U-Support Bracket:
- Single red wire to positive power supply of DC/10-32V
- Single black wire to GND
- Single brown wire to positive wire of back-up light
- Single white wire to positive power wire of keft light
- Single blue wire to positive power wire of right light
- Single green or yellow wire to any other trigger control
* The yellow wire will display 2-4 cameras when triggered
Battery
Angle adjustment
screws
Automobile
Application
Video Inputs
* See next page
for more trigger
information
8
1.3 Trigger Display:
1.3.1. When the green wire is activated, the monitor
automatically switches to CAM1
1.3.2. When the white wire is connected to the positive wire of
the left turn light, the monitor automatically switches to CAM2
(left side camera) when the left turn is activated.
1.3.3. When the blue wire is connected to the positive wire of
the right turn light, the monitor automatically switches to CAM3
(right side camera) when the right turn indicator is activated.
1.3.4. When the brown wire is connected to the positive wire of
the back-up light, the monitor automatically switches to CAM4
(back-up camera) when the back-up light is turned on. The
distance grid will also be displayed.
1.3.5. When the yellow wire is connected to the positive wire,
the monitor automatically switches to quad or split display.
Connection depends on the application request.
Cameras displayed are selected via settings menu.
1.4 Volume Selection Under Quad View:
1.4.1. Check the volume icon on the top right area on single channel. It stands for audio out
for the selected channel.
1.4.2. Press Ż or Ź to select the channel for
audio out.
CAM1
CAM2
CAM3
CAM4
CAM1 CAM2
CAM3 CAM4
9
MENU
• Menu operates in single image mode, not in quad view.
• Press MENU to display the following options and settings:
1. MODE
2. PICTURE
3. MIR-FLIP
4. RECORD
5. AUTOSCAN
6. SYSTEM
7. PLAY
8. PAIRING
1. Press Ż or Źto select MODE. Press OK to enter the submenu and press
Ż or Źto select QUAD/H-SPLIT/SPLIT. Press MENU to return to main menu.
10
2. Press Ż or Źto select PICTURE and press OK to enter the submenu.
• Press Ż or Źto select BRIGHTNESS/CONTRACT/HUE/VOLUME and then
press OK to enter the setting accordingly. When the icons turn red, press
Ż or Źon the menu for selection decreasing or adding. Press OK to exit
the menu. At the submenu, press MENU to return to the main menu.
3. Press Ż or Źto select MIR-FLIP and press OK to select.
• Press Ż or Źto select NORMAL/MIRROR/MIR-FLIP/FLIP. Press MENU to
return to the main menu.
Table of contents
Other Axis Recording Equipment manuals
