Axis 1650 Manual
ENGLISH FRANCAIS DEUTSCH ESPAÑOL
ITALIANO
AXIS 1650
Print Server
Set-up Instructions
ENGLISH FRANCAIS DEUTSCH ESPAÑOL
ITALIANO
AXIS 1650 Set-up Instructions Page3
ENGLISH
AXIS 1650 Set-up Instructions
Unpack box
Verify that you have all the items listed below:
Install Canon Printer Driver
Important: Please install the printer driver according to the manual that came with your Canon device. The
printer driver must be installed before continuing.
LPT1 Printer Connector
Ethernet Connector
External Power Supply
Connector Power Indicator USB Connector
Network
Indicator
•Network cable
•USB cable
•Mounting clip
•Power adapter
•AXIS 1650 CD
•AXIS 1650 Set-Up Instructions
Page 4 AXIS 1650 Set-up Instructions
Connect AXIS 1650
1. Make sure the Canon device is off and unplugged and that the AXIS 1650 external
power supply is disconnected.
2. Locate the serial number, found on the underside label of the AXIS 1650, and write it
down. You will need this number to configure the AXIS 1650.
3. Connect the AXIS 1650 to the Canon device. Please refer to the correct connection procedure below for
your Canon device.
Note: For Canon devices supporting both parallel and USB connections, select one of the
connection procedures below to connect the AXIS 1650.
Connect the AXIS 1650 to the USB port using the USB cable.
Product Name
Serial Number/MAC Address
Print Server Name
For CANON Devices with USB Port
AXIS 1650 Set-up Instructions Page5
ENGLISH
Connect the AXIS 1650 to the printer’s parallel port, the LPT port. Secure in place by pressing in
locking clips.
4. Connect AXIS 1650 to the Ethernet connector using a network cable.
5. Turn the Canon device on and wait for ready mode.
6. Connect AXIS 1650 to the external power supply connector using the power adapter.
The power indicator will light up. When the network indicator starts to flash, the AXIS
1650 is correctly connected to the network.
For CANON Devices with LPT Port
Page 6 AXIS 1650 Set-up Instructions
Mount the Print Server (USB only)
Important: Do not drill into the Canon device; the provided wall screw is an optional wall
mount. It is recommended that you do not leave the AXIS 1650 hanging from the Canon
device, please affix to the Canon device.
The mounting clip comes with 3 parts:
• Transparent plastic holder
• Transparent plastic clip
•Wallscrew
1. Peel off adhesive tape and fasten AXIS 1650 to the plastic holder. It is recommended
that the holder be affixed to the AXIS logo side of the AXIS 1650.
2. Peel off adhesive tape and fasten plastic clip to the Canon device.
It is recommended that the clip be affixed to the back side, upper right corner of the unit.
Wall Screw
Holder
Clip
For CANON MF-type Devices
AXIS 1650 Set-up Instructions Page7
ENGLISH
Assign IP Address
Install AXIS IP JumpStarter
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If auto-run is off, click on
My Computer and click on the AXIS 1650 CD and select
[Open].
3. Click the blue Software link on the upper right.
4. Click the blue AXIS IP JumpStarter link to install.
5. A File Download window will appear, select Run this
program from its current location radio-button and
click [OK].
6. AXIS IP JumpStarter Setup will appear, click
[Next].
7. To install in the default destination folder, click
[Next], otherwise select another destination
folder and continue.
8. A system requirement diagnostic will run to
ensure needs are sufficient, click [Next].
9. AXIS IP JumpStarter will install, once completed be sure to check the action Create a
shortcut to AXIS IP JumpStarter on your desktop. Click [Next], then [Finish].
Page 8 AXIS 1650 Set-up Instructions
Run AXIS IP JumpStarter
1. Open AXIS IP JumpStarter. Select the AXIS
1650 from the serial number list. All AXIS1650
appear with the default IP address 192.168.0.90.
If you are installing several AXIS 1650, check
the serial number to locate a specific AXIS
1650.
2. Select Server | Set IP Address and the Set IP
Address window appears.
3. Click the radio button that corresponds to your choice of IP setting method (static or
dynamic using DHCP). When assigning a static IP address you also have to define the
Subnet Mask and Default Gateway.
4. Click [OK] to save your settings.
5. You may be prompted to enter the server root password (by default set to <blank>), click
[OK] and the AXIS 1650 will appear in the list with the assigned IP address.
6. To verify that you have access to the AXIS 1650’s Web pages, highlight the AXIS 1650
in the list and select Server | Server Home Page.
AXIS 1650 Set-up Instructions Page9
ENGLISH
Install AXIS CAPT Print Monitor
Note: Prior to installing the latest version of AXIS CAPT Print Monitor, please uninstall any
previous versions of AXIS CAPT Print Monitor.
Note: CANON FAX-L400 can utilize Standard TCP/IP port in case of Windows 2000/XP/Server 2003. Refer to
the manual of the server regarding the installation.
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If auto-run is
off, click on My Computer and click on the AXIS
1650 CD and select [Open].
3. Click the Software link on the upper right.
4. Click the AXIS CAPT Print Monitor link to install.
5. A File Download window will appear, select Run this program from its current location and
click [OK].
6. CAPT Print Monitor will download. Once complete, click [Open]. If the dialog box closes,
locate the destination folder that CAPT Printer Monitor is saved to and open.
7. InstallShield Wizard will begin the CAPT Print Monitor Setup program. Click [Next].
8. Review the license agreement. If you agree and accept the terms, click [Yes].
Page 10 AXIS 1650 Set-up Instructions
9. For Windows XP/Server 2003/Vista:
Make sure that the block against the program is
removed in the Windows Firewall settings:
10. To start copying files, click [Next].
11. CAPT Print Monitor will be installed, once
completed click [Finish].
Set up port in Windows
This information applies to:
• Windows Vista
• Windows XP
• Windows Server 2003
• Windows 2000
1. Go to:
Windows Vista - Start | Control Panel | Hardware and
Sound | Printers.
Windows XP/2003 - Start | Settings | Printers and
Faxes.
Windows 2000 - Start | Settings | Printers.
Select the Canon device, right click and select Properties.
Select the Ports tab. Select [Add Port].
2. Select AXIS CAPT Port and click [New Port].
Other manuals for 1650
4
Table of contents
Languages:
Other Axis Print Server manuals
Axis
Axis 5570e User manual
Axis
Axis 5570e User manual
Axis
Axis 5500 User manual
Axis
Axis 27978R1 User manual
Axis
Axis C1440AXIS - Axis 1440 Print Server Installation and operation manual
Axis
Axis 5400+ User manual
Axis
Axis 540 series User manual
Axis
Axis AXIS 5900 User manual
Axis
Axis 5400+ User manual
Axis
Axis 1650 Manual
Axis
Axis C1440AXIS - Axis 1440 Print Server User manual
Axis
Axis OfficeBasic USB Wireless User manual
Axis
Axis 5600+ User manual
Axis
Axis 27979R1 User manual
Axis
Axis 1650 User manual
Axis
Axis 540 series User manual
Axis
Axis 5600+ User manual
Axis
Axis 5570e User manual
Axis
Axis AXIS 560 User manual
Axis
Axis 5550 User manual
