aXbo S.P.A.C. User manual
The “WEEKDAYS” feature
The “WEEKDAYS” feature enables you to set a different alarm time for every single day and
therefore also means that you can set the alarm to OFF on certain days, e.g. at the weekend.
Menu settings
WEEKDAYS (Example: Person 1)
In the menu item “P1 SET“you can choose between two alarm settings: ”AL1 DAYS“and “AL1 OFF“
-Using “AL1 DAYS“ you can set the alarm time separately for every single weekday.
-“AL1 OFF“ turns the alarm OFF on all days.
Choice of weekday
The current day of the week is indicated by the flashing first letter –you can scroll to any other day. You
can then click to select the desired weekday.
Weekday setting
After choosing the desired weekday there are 2 more options:
”Set Alarm Time“ and ”Set Alarm OFF“
-You can set the wake-up time (e.g. “7.00”) by clicking. After the hours/minutes have been set,
the menu automatically jumps to the next weekday.
-By scrolling to “OFF” you can turn OFF the respective alarm for this weekday.
Instructions
Scroll to P1 SET + click, Scroll to ALARM + click, AL1 DAYS click, scroll to choose the weekday + click,
Click to set the alarm time or scroll to OFF + click, Scroll for setting the alarm hour + click, Scroll for
setting the alarm minutes + click, Set next weekday or use “Back” button to jump to the P1 menu
(ALARM) or via “Home”button for the standby mode (Home).
Shortcut buttons
-Press the Back (for P1) or Home (for P2) button once briefly in standby mode to set the alarm
time. The alarm time for today or tomorrow, depending on how late it is, will be displayed. By
scrolling you can jump between the alarm times on the separate weekdays. By clicking you can
set the hour and/or minutes of the alarm on each weekday without having to scroll through the
whole menu.
After a weekday has been set, the menu automatically springs back into standby mode.
By pressing the shortcut button (either the back or home button, depending on the person) for
2 seconds in standby mode, the alarm will be activated/deactivated for all days.
New symbols on the display
-Flashing alarm time
A flashing alarm time means that this alarm is just for the following day.
-The first letter of all the weekdays (MTWTF SS) appears
This means that no alarm time has been set for the following day. The flashing letter shows
which day it is today. On days when an alarm time has not been set, only a dash appears.
Example: Today is Friday and for Saturday and Sunday no alarm times have been set - Display:
MTWTF-- (“F“ is flashing)
Legend
Click –this means the clicking of the scroll button.
Bugfixing V234/V238
-The alarm can generally (for all days) be deactivated/activated via the “Back” and “Home“
shortcut buttons in the LOW BAT / CHARGE status.
“We hope you enjoy the new feature!“
aXbo R&D Team, Vienna/Brighton 2014
Table of contents
Other aXbo Alarm Clock manuals
