Awei T23 User manual
Wireless Earbuds
User Manual
Thank you for purchasing our products. This manual
addresses the safety guidelines, warranty and operating
instructions. Please review this manual thoroughly
before operating your device.
T23
Package Contents.............................................................
At a Glance.......................................................................
Earbuds LED Indicator Guide...........................................
Charging Case LED Indicator Guide.................................
Wearing the Earbuds........................................................
Using the Earbuds............................................................
Cleaning the Earbuds and Charging Case.......................
Trouble Shooting.............................................................
Specifications..................................................................
SAFETY AND WARRANTY.............................................
1
2
3
3
4
5
11
12
15
16
English Version
Package Contents
- 1 -
③
② ①
④⑤
①Wireless earbuds × 1 pair (L / R)
②Charging case × 1
③ Eartips × 3 pairs (S / M / L; M size eartips
pre-installed)
④ USB-C charging cable × 1
⑤User manual × 1
- 2 -
At a Glance
Charging Case
Earbuds
Charging pins
USB-C charging port
LED indicator
Microphone
Touch button
LED indicator Charging contacts
Earbuds LED Indicator Guide
- 3 -
Power on
Power off
Pairing
Connected
Being charged
Fully charged
The indicator stays red and white
for one second
The indicator stays red for one
second
The indicator flashes red and
white alternately
The indicator flashes white once
every 5 seconds
The indicator stays red
The indicator goes off
System State Indicator Activity
Charging Case LED Indicator Guide
You can take an earbud out of the case and then
put it back to check the charging case battery level.
Note:
The indicator flashes red when the charging case is
being charged and turns white when fully charged.
- 4 -
The indicator flashes
white once
The indicator flashes
white twice
The indicator flashes
red three times
70%-100% battery
25%-70% battery
1%-25% battery
Indicator State Battery Level
Wearing the Earbuds
- 5 -
Insert the earbud into your ear and rotate to fit
comfortably. Ensure the microphone is pointing
towards your mouth. To determine the best fit, you
may need to try all sizes of eartips.
When you use the earbuds for the first time, remove
the insulating films on the charging contacts of the
earbuds.
Using the Earbuds
●Charge the earbuds
1) Align the charging contacts on the right earbud
with the charging pins on the right side of the
case.
●Charge the charging case
1) Plug the small end of the USB-C cable into the
USB-C port of the charging case.
2) Plug the other end into a USB wall charger or
computer (DC 5V) that is powered on.
- 6 -
2) Repeat step 1 and to charge the left earbud.
3) Close the case.
- 7 -
Notes:
●It takes approximately 1 hour to fully recharge the
earbuds.
●Fully charge both the earbuds and the charging
case before the first-time using.
●The earbuds and the charging case charge
simultaneously. The charging case can be used
as a standalone charger.
●Power on / off
Automatic operation
Power on: Open the charging case and take the
earbud(s) out.
Power off: Put the earbud(s) back into the charging
case and close the case.
Manual operation
Power on: Tap and hold the touch button on the left /
right earbud for 2 seconds.
Power off: Tap and hold the touch button on the left /
right earbud for 4 seconds.
- 8 -
Notes:
●The earbuds will directly enter pairing mode the
first time you turn them on.
●Each time you turn on your earbuds, they will
automatically connect to your last successfully
connected device if available within the Bluetooth
range.
Note:
When the earbuds are being charged in the charging
case and the case is out of power, the earbuds will
turn on automatically.
●Pair
1) Make sure the earbuds and your Bluetooth
device are next to each other or within 3 feet
and there are no obstacles between.
2) Turn on the Bluetooth of your Bluetooth device.
3) Turn on the earbuds and the earbuds enter
pairing mode.
4) In the list of found Bluetooth devices in your
Bluetooth device, choose "T23" to pair.
Table of contents
Other Awei Headphones manuals
