Avolites Quartz User manual

Avolites Quartz

Operator’s Manual

Version 10

TitanUniversal_Man_v10_QU.doc 15 March 2016

Useful Avolites phone numbers:-

Avolites England

Sales and service* (+44) (0) 20 8965 8522

Service out of hours* (+44) (0) 7831 178 888

Fax (+44) (0) 20 8965 0290

Email [email protected]

Website http://www.avolites.com

Before contacting Avolites for service enquiry please ensure that you

have the product serial number and the software version. The serial

number can be found on the back of the desk; the software version is

displayed on the menu prompt when the Quartz is switched to

System mode.

The latest version of this manual and console software can be

downloaded from the Avolites website.

The small print :

No Liability for Consequential Damages

Avolites has a policy of continuous product and documentation improvement. As such

the detail within this manual may not match the operation of the console.

In no event shall Avolites be liable for any direct, indirect, special, incidental, or

consequential damages or loss whatsoever (including, without limitation, damages for

loss of profits, business interruption, or other pecuniary loss) arising out of the use or

inability to use the console even if Avolites Ltd. has been advised of the possibility of

such damages. Because some jurisdictions do not allow the exclusion or limitation of

liability for consequential or incidental damages, the above limitation may not apply to

you.

Avolites Ltd recognise that all trademarks within the manual are the property of their

respective owners.

Reprint and revision history:

Titan Universal Manual v10: March 2016

TitanUniversal_Man_v10_QU.doc 15 March 2016

Written by Tim Mitchell, Sabre Technology Ltd

http://www.sabretechnology.co.uk

with examples by Nic Morris

Reference Manual Contents - Page 5

TitanUniversal_Man_v10_QU.doc 15 March 2016

SECTIONS

1. QUICK START 15

2. SETTING UP AND USING THE CONSOLE 19

3. PATCHING 49

4. CONTROLLING DIMMERS AND FIXTURES 71

5. PALETTES 97

6. SHAPES AND PIXEL MAPPER EFFECTS 111

7. CUES 149

8. CHASES 171

9. CUE LISTS 183

10. CAPTURE VISUALISER 205

11. RUNNING THE SHOW 211

12. REMOTE CONTROL 227

13. USER SETTINGS AND OTHER OPTIONS 233

14. FIXTURE PERSONALITIES 259

15. NETWORKING THE CONSOLE 263

16. USING DIFFERENT AVOLITES CONSOLES 273

17. RELEASE NOTES 275

18. TITAN COMMANDS QUICK REFERENCE 299

19. GLOSSARY OF WORDS 303

This icon shows important information which you should

know about to avoid damage to your console or loss of

important data.

This icon shows information which is useful to know.

This icon shows handy tips which will help you use the

console more efficiently.

Page 6 – Reference Manual Contents

TitanUniversal_Man_v10_QU.doc 15 March 2016

Reference Manual Contents - Page 7

TitanUniversal_Man_v10_QU.doc 15 March 2016

CONTENTS

1. Quick Start 15

1.1 Patching fixtures ................................................................... 15

1.2 Controlling fixtures ................................................................ 15

1.3 Programming cues and chases................................................. 16

1.4 Programming palettes ............................................................ 17

1.5 DMX / network setup ............................................................. 18

2. Setting up and using the console 19

2.1 Guide to the Quartz ............................................................... 19

2.2 Connecting up....................................................................... 22

2.2.1 Cautions ............................................................................................ 22

2.2.2 Connecting mains power ...................................................................... 22

2.2.3 Starting up and shutting down.............................................................. 22

2.2.4 Titan Healthcheck ............................................................................... 22

2.2.5 Connecting DMX lines .......................................................................... 23

2.2.6 Connecting console wings .................................................................... 24

2.3 Using the touch screen and monitor ......................................... 25

2.3.1 Workspace windows ............................................................................ 26

2.3.2 The menu area of the touch screen ....................................................... 30

2.3.3 The toolbar ........................................................................................ 32

2.3.4 The Heads-Up Display (HUD)................................................................ 33

2.3.5 Visualiser ........................................................................................... 34

2.3.6 Key profiles ........................................................................................ 34

2.3.7 Undo/Redo......................................................................................... 34

2.3.8 Key macro buttons.............................................................................. 35

2.3.9 Locking the console............................................................................. 36

2.3.10 Keyboard shortcuts ........................................................................... 36

2.4 Multi-user operation............................................................... 38

2.4.1 Users ................................................................................................ 38

2.4.2 Handle Worlds .................................................................................... 38

2.4.3 Linking to other TitanNet sessions ......................................................... 39

2.5 Titan Simulator ..................................................................... 40

2.5.1 Installing Titan Simulator ..................................................................... 41

2.5.2 Running Titan Simulator ...................................................................... 41

2.5.3 Using Virtual Panel with a console ......................................................... 42

2.6 Loading and saving shows ...................................................... 42

2.6.1 Saving the show ................................................................................. 42

2.6.2 Loading a show................................................................................... 43

2.6.3 Importing parts of other shows............................................................. 44

2.6.4 Autosave ........................................................................................... 46

2.6.5 Backing up existing show files to USB pen drive...................................... 46

2.7 Clearing the console............................................................... 46

2.8 Creating reports .................................................................... 46

3. Patching 49

3.1 Patching new fixtures or dimmers ............................................ 49

3.1.1 Fixture select buttons and handles ........................................................ 49

3.1.2 Patching dimmers ............................................................................... 50

3.1.3 Patching moving light fixtures............................................................... 51

3.1.4 Capture Visualiser Auto Patch ............................................................... 54

3.1.5 Patching fixtures with multiple cells (sub fixtures) ................................... 54

3.1.6 Patching by RDM................................................................................. 55

3.1.7 Finding a lost fixture............................................................................ 55

3.2 Changing the patch................................................................ 56

3.2.1 Patch View ......................................................................................... 56

3.2.2 View detailed fixture information........................................................... 57

3.2.3 Changing DMX addressing using Patch View ........................................... 58

3.2.4 Changing DMX address using Patch menu .............................................. 58

3.2.5 Setting legends................................................................................... 59

3.2.6 Fixture button halo.............................................................................. 60

3.2.7 DMX view window ............................................................................... 61

3.2.8 Fixture Exchange ................................................................................ 62

3.2.9 Exchange Mapping .............................................................................. 63

3.2.10 Update personalities .......................................................................... 65

3.3 Copying, moving and deleting fixtures ...................................... 65

Page 8 – Reference Manual Contents

TitanUniversal_Man_v10_QU.doc 15 March 2016

3.3.1 Copying or moving a patched fixture ..................................................... 65

3.3.2 Using copied fixtures ........................................................................... 66

3.3.3 Deleting a patched fixture .................................................................... 66

3.4 Advanced options .................................................................. 67

3.4.1 Swap pan and tilt................................................................................ 67

3.4.2 Invert attributes ................................................................................. 67

3.4.3 Attribute limits.................................................................................... 68

3.4.4 Fixture Offset ..................................................................................... 68

3.4.5 Fixture / Attribute curves ..................................................................... 69

3.4.6 Freeze fixtures or attributes ................................................................. 69

3.4.7 Editing the personality ......................................................................... 70

4. Controlling dimmers and fixtures 71

4.1 Using the select buttons and wheels......................................... 71

4.1.1 Selecting fixtures and dimmers for control ............................................. 71

4.1.2 Setting fixtures to a start position (Locate)............................................. 72

4.1.3 Clearing selection................................................................................ 73

4.1.4 Fixtures with multiple cells/subfixtures .................................................. 74

4.1.5 Changing attributes using the wheels .................................................... 75

4.1.6 Setting attributes on the touch screen ................................................... 77

4.1.7 Setting attributes from the softkeys ...................................................... 80

4.1.8 Adjusting attributes with the @ buttons ................................................. 80

4.1.9 Selecting fixtures and dimmers by number (Channel) .............................. 81

4.1.10 Selecting using a pattern.................................................................... 82

4.1.11 Selecting fixtures which are in a palette or playback .............................. 82

4.1.12 Attribute groups – IPCGBES-FX........................................................... 83

4.1.13 Stepping through selected fixtures one at a time................................... 83

4.1.14 Highlighting the selected fixture with Prev/Next .................................... 84

4.1.15 Flash selected fixtures to full .............................................................. 84

4.1.16 Turn off unselected fixtures ................................................................ 84

4.1.17 Align fixtures .................................................................................... 84

4.1.18 Flip.................................................................................................. 85

4.1.19 Fan mode......................................................................................... 85

4.1.20 Setting fixture/attribute times............................................................. 88

4.2 Viewing and editing fixture values............................................ 89

4.2.1 The Channel Grid window..................................................................... 89

4.2.2 Intensity window ................................................................................ 90

4.3 Fixture groups....................................................................... 92

4.3.1 Using fixture groups ............................................................................ 92

4.3.2 Fixture Order and Fixture Layout in groups............................................. 93

4.4 Advanced options .................................................................. 95

4.4.1 The ML Menu button........................................................................... 95

4.4.2 Lamping fixtures on and off.................................................................. 95

5. Palettes 97

5.1 Creating palettes ................................................................... 98

5.1.1 Which attributes are stored in palettes................................................... 98

5.1.2 Storing a palette ................................................................................. 98

5.1.3 Nested palettes..................................................................................101

5.1.4 Quick record......................................................................................101

5.1.5 Setting legends for palettes.................................................................102

5.1.6 Creating an effects palette (shape or pixel mapper)................................103

5.1.7 Creating a time palette .......................................................................103

5.2 Recalling palettes ................................................................ 104

5.2.1 Recalling a palette value .....................................................................104

5.2.2 Palette pages ....................................................................................104

5.2.3 Only showing relevant palettes ............................................................105

5.2.4 Quick palettes with no fixtures selected ................................................105

5.2.5 Setting palettes to all fixtures in a playback ..........................................105

5.3 Editing palettes ................................................................... 105

5.3.1 Viewing and editing the content of palettes ...........................................105

5.3.2 Changing the content of palettes..........................................................106

5.3.3 Updating palettes used in a playback....................................................106

5.4 Copying, moving and deleting palettes ................................... 107

5.4.1 Copying or moving a palette................................................................107

5.4.2 Deleting palettes................................................................................107

5.5 Timing with palettes............................................................. 108

5.5.1 Palettes with saved times....................................................................108

5.5.2 Manually overriding palette times.........................................................108

Reference Manual Contents - Page 9

TitanUniversal_Man_v10_QU.doc 15 March 2016

5.5.3 Manual fixture overlap when recalling palettes .......................................108

5.5.4 Master Time for palettes .....................................................................109

6. Shapes and Pixel Mapper effects 111

6.1 Shape generator.................................................................. 111

6.1.1 Selecting a shape...............................................................................112

6.1.2 Changing size and speed of a shape .....................................................113

6.1.3 Changing the phase of a shape across multiple fixtures...........................114

6.1.4 Shape direction .................................................................................115

6.1.5 Using shapes in cues ..........................................................................115

6.2 Key frame shapes................................................................ 116

6.2.1 Creating a key frame shape.................................................................116

6.2.2 Changing shape parameters in the Effect Editor .....................................117

6.2.3 Saving a key frame shape to a cue.......................................................120

6.3 Pixel mapper....................................................................... 121

6.3.1 Creating Pixel Mapper effects...............................................................121

6.3.2 Pixel mapper Layer Masters.................................................................124

6.4 Editing shapes and effects .................................................... 125

6.4.1 Editing shapes and effects in cues ........................................................125

6.4.2 Selecting a running shape to edit .........................................................125

6.4.3 Resynchronise shapes ........................................................................125

6.4.4 Changing fixture order in a shape ........................................................126

6.4.5 Removing or adding fixtures................................................................126

6.4.6 Reversing a shape..............................................................................126

6.4.7 Deleting shapes .................................................................................126

6.5 Advanced options ................................................................ 126

6.5.1 Fading shape size and speed ...............................................................126

6.6 Pixel Mapper examples ......................................................... 127

6.6.1 Randomising effects ...........................................................................127

6.6.2 Overlaying effects ..............................................................................130

6.6.3 Creative use of fixture layouts .............................................................133

6.6.4 Other Layout Editor tools ....................................................................137

6.6.5 Playback Order and Priorities...............................................................138

6.6.6 Displacement and Layer Properties.......................................................142

6.6.7 Spawn and Pre-Spool .........................................................................145

7. Cues 149

7.1 Creating a cue..................................................................... 149

7.1.1 How the Quartz works when programming ...........................................149

7.1.2 Creating a cue ...................................................................................150

7.1.3 Quick Build cues ................................................................................150

7.1.4 Using shapes/effects in cues................................................................151

7.1.5 Blind mode........................................................................................151

7.1.6 Recording cue with a mask..................................................................151

7.1.7 Convert cue to chase or cue list ...........................................................151

7.2 Using a cue......................................................................... 152

7.2.1 HTP and LTP......................................................................................152

7.2.2 Playing back a cue .............................................................................152

7.2.3 Changing playback pages....................................................................153

7.2.4 Viewing active playbacks ....................................................................153

7.2.5 Speed and Size Masters ......................................................................154

7.2.6 Releasing running playbacks................................................................155

7.2.7 Releasing a whole page of playbacks ....................................................155

7.2.8 Release mask - releasing individual attributes........................................155

7.2.9 Programming the Release / Power On state...........................................156

7.2.10 Turning off individual fixtures ............................................................156

7.3 Editing cues ........................................................................ 157

7.3.1 Editing a cue by merging ....................................................................157

7.3.2 Updating stored values and palettes used in a cue .................................157

7.3.3 Playback and Cue view .......................................................................158

7.3.4 Using parts of existing cues - the Include function..................................160

7.3.5 Removing attributes from cues using “Off” ............................................160

7.4 Copying, moving, linking and deleting .................................... 161

7.4.1 Copying or moving a cue ....................................................................161

7.4.2 Deleting a cue ...................................................................................162

7.5 Cue timing.......................................................................... 162

7.5.1 Setting fade times and Overlap for a cue ..............................................162

7.5.2 Changing fixture order........................................................................164

7.5.3 Setting attribute fade times for a cue ...................................................165

Page 10 – Reference Manual Contents

TitanUniversal_Man_v10_QU.doc 15 March 2016

7.5.4 Editing times in the programmer..........................................................166

7.6 Playback options ................................................................. 166

7.6.1 Playback options - Playback ................................................................167

7.6.2 Playback options - Handle ...................................................................168

7.6.3 Playback options - Fader.....................................................................168

7.6.4 Playback options - Effects ...................................................................169

7.6.5 Playback options - Release ..................................................................169

8. Chases 171

8.1 Creating a chase ................................................................. 171

8.1.1 Programming a chase .........................................................................171

8.1.2 Creating a chase with Quick Build ........................................................172

8.2 Playback ............................................................................ 172

8.2.1 Playing back a chase ..........................................................................172

8.2.2 Connecting a chase for control.............................................................173

8.2.3 Setting speed and crossfade for a chase ...............................................173

8.2.4 Manually controlling the steps of a chase ..............................................174

8.2.5 Changing chase direction ....................................................................174

8.2.6 Jumping to a step ..............................................................................174

8.3 Editing a chase.................................................................... 175

8.3.1 Opening a chase for editing.................................................................175

8.3.2 Editing a chase using Unfold................................................................175

8.4 Copying, moving, linking and deleting .................................... 176

8.4.1 Copying or moving a chase .................................................................176

8.4.2 Deleting a chase ................................................................................176

8.4.3 Deleting a step from a chase ...............................................................176

8.5 Chase timing....................................................................... 176

8.5.1 Global timings for chases ....................................................................176

8.5.2 Individual cue times in chases .............................................................178

8.5.3 Setting attribute fade times for a cue in a chase ....................................179

8.6 Chase options ..................................................................... 179

8.6.1 Chase options - Playback ....................................................................180

8.6.2 Chase options – Handle ......................................................................180

8.6.3 Chase Options – Effects ......................................................................181

8.6.4 Chase Options - Release .....................................................................181

8.6.5 Renumber All Cues.............................................................................181

9. Cue Lists 183

9.1 Creating a cue list................................................................ 183

9.1.1 Programming a cue list .......................................................................183

9.1.2 Changing legends for cues in a cue list .................................................185

9.1.3 Shape tracking in cue lists...................................................................185

9.1.4 Autoloading a playback within a cue list ................................................186

9.1.5 Running a key macro from a cue list.....................................................187

9.1.6 Keyboard shortcuts/syntax for cue lists.................................................187

9.2 Cue List playback ................................................................ 187

9.2.1 Running a cue list ..............................................................................187

9.2.2 Killing a cue list .................................................................................189

9.2.3 Tracking ...........................................................................................189

9.2.4 Move In Dark (MID) functions..............................................................190

9.3 Editing cue lists ................................................................... 191

9.3.1 Playback View window ........................................................................191

9.3.2 Editing values in Cue View window .......................................................191

9.3.3 Moving and copying cues ....................................................................191

9.3.4 Editing a cue list using Unfold..............................................................192

9.3.5 Using Update to change tracked cues ...................................................193

9.3.6 Editing a cue list which is running ........................................................193

9.3.7 Editing a cue list while recording ..........................................................194

9.3.8 Updating values in a range of cues .......................................................194

9.3.9 Disabling a cue ..................................................................................195

9.4 Copying, moving, linking and deleting .................................... 195

9.4.1 Copying or moving a cue list ...............................................................195

9.4.2 Deleting a cue list ..............................................................................195

9.4.3 Deleting a cue from a cue list ..............................................................195

9.5 Cue list timing..................................................................... 195

9.5.1 Time and fade options for Cue Lists......................................................195

9.5.2 Cue linking & Link Offset.....................................................................196

9.5.3 Individual attribute fade times .............................................................197

9.5.4 Fixture overlap ..................................................................................198

This manual suits for next models

Table of contents

Other Avolites Dj Equipment manuals

Avolites

Avolites Pearl 2008 User manual

Popular Dj Equipment manuals by other brands

ALPHA LITE

ALPHA LITE ALPHA 1500 User manual book

Chauvet

Chauvet OVATION E-930VW Quick reference guide

Zumtobel

Zumtobel APHRODITE Home Instructions for use

Snow Masters

Snow Masters Zig Oscillator user manual

EuroLite

EuroLite 50530554 user manual

Beamz

Beamz BUV243 user manual

thomann

thomann Stairville DJ Lase 40-G MK-III user manual

Eagletone

Eagletone 6 Eyes Flower user manual

EuroLite

EuroLite FLD-1508 user manual

Technical Pro

Technical Pro LG8xSEA user manual

JB Systems

JB Systems Lounge Laser DMX Operation manual

Lightmaxx

Lightmaxx Vega Halo 90 user manual

Elation

Elation FUZE WASH Z350 user manual

Maverick

Maverick MK3 WASH Quick reference guide

Infinity

Infinity TF-260C7 Fresnel manual

Chauvet

Chauvet EVE E-50Z Quick reference guide

Eliminator Lighting

Eliminator Lighting E 138 manual

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC user manual