AVMATRIX PVS0613 User manual
PORTABLE 6 CHANNEL
MULTI-FORMAT VIDEO SWITCHER
USING THE UNIT SAFELY
Before using this unit, please read below warning and precautions which provide important information
concerning the proper operation of the unit. Besides, to assure that you have gained a good grasp of
every feature of your new unit, read below manual. This manual should be saved and kept on hand for
further convenient reference.
Warning And Cautions
※To avoid falling or damage, please do not place this unit on an unstable cart, stand, or table.
※Operate unit only on the specified supply voltage.
※Disconnect power cord by connector only. Do not pull on cable portion.
※Do not place or drop heavy or sharp-edged objects on power cord. A damaged cord can cause fire or
electrical shock hazards. Regularly check power cord for excessive wear or damage to avoid possible fire
/ electrical hazards.
※Ensure unit is properly grounded at all times to prevent electrical shock hazard.
※Do not operate unit in hazardous or potentially explosive atmospheres. Doing so could result in fire,
explosion, or other dangerous results.
※Do not use this unit in or near water.
※Do not allow liquids, metal pieces, or other foreign materials to enter the unit.
※Handle with care to avoid shocks in transit. Shocks may cause malfunction. When you need to
transport the unit, use the original packing materials or alternate adequate packing.
※Do not remove covers, panels, casing, or access circuitry with power applied to the unit! Turn power off
and disconnect power cord prior to removal. Internal servicing / adjustment of unit should only be
performed by qualified personnel.
※Turn off the unit if an abnormality or malfunction occurs. Disconnect everything before moving the unit.
Note: due to constant effort to improve products and product features, specifications may change without
notice.
1
CONTENTS
1. BRIEF INTRODUCTION.............................................................................................................................. 2
1.1. Overview...................................................................................................................................................... 2
1.2. Main Features............................................................................................................................................. 2
2. INTERFACES.................................................................................................................................................3
2.1. Rear Interfaces........................................................................................................................................... 3
2.2. Tally PIN Definition.....................................................................................................................................3
3. SPECIFICATION........................................................................................................................................... 4
4. FRONT CONTROL PANEL......................................................................................................................... 5
5. OPERATION INSTRUCTION...................................................................................................................... 6
5.1. Multiview Output Layout............................................................................................................................ 6
5.2. PGM PVW Switching................................................................................................................................. 7
5.2.1. PGM, PVW Channel Selection............................................................................................................. 7
5.3. Transition Control....................................................................................................................................... 7
5.3.1. FTB (Fade to Black)................................................................................................................................8
5.4. Audio Mixer Setting.................................................................................................................................... 8
5.4.1. Audio Description.................................................................................................................................... 8
5.5. Transition Effects........................................................................................................................................9
5.5.1. MIX Transition..........................................................................................................................................9
5.5.2. WIPE Transition...................................................................................................................................... 9
5.5.3. FADE Transition...................................................................................................................................... 9
6. MENU SETTING..........................................................................................................................................10
6.1. SDI PGM/ AUX and Multiview Output Format.....................................................................................10
6.2. Audio Setting.............................................................................................................................................10
6.2.1. Mixing Mode.......................................................................................................................................... 10
6.2.2. AFV Mode.............................................................................................................................................. 10
6.3. PIP Mode...................................................................................................................................................11
6.4. Main Menu Setting................................................................................................................................... 11
6.4.1. System Settings.................................................................................................................................... 12
6.5. Network Settings...................................................................................................................................... 12
6.5.1. Network.................................................................................................................................................. 12
6.5.2. NetMask................................................................................................................................................. 13
6.5.3. GateWay................................................................................................................................................ 13
2
1. BRIEF INTRODUCTION
1.1. Overview
PVS0613 is an all-in-one 6-channel video switcher that allows video switching, audio mixing, and different
transition effects. Inputs signal is auto-detected while for PGM output can be scaled, which can be
compatible with more different equipment and more flexible. The unit integrated a 13.3 inch Full HD LCD
monitor which can be used in wide variety of venues for events,seminars,etc.
1.2. Main Features
Portable All-In-One design with 13.3 inch FHD LCD display
6 channel inputs:4×SDI & 2×HDMI inputs
2×SDI & 1×HDMI PGM outputs, 1×SDI & 1×HDMI multiview output
1×SDI AUX output, can be selected as PGM or PVW
Multi-format support, input format auto-detected and PGM outputs select-able
T-Bar/ AUTO/ CUT transitions
Mix/ Fade/ Wipe transition effects
PIP mode size and position adjustable
Audio mixing
GPIO for Tally, LAN for update
FTB for emergency situation
3
2. INTERFACES
2.1. Rear Interfaces
1
GPIO (for tally)
8
HDMI PGM OUT
2
AUDIO IN
9
HDMI & SDI MULTIVEW OUT
3
3.5mm AUDIO IN/ OUT
10
SDI PGM OUT
4
SDI AUX OUT
11
SDI IN
5
Power Switch
12
HDMI IN
6
LAN (for update)
13
DC 12V
7
AUDIO OUT
2.2. Tally PIN Definition
PIN
Definition
PIN
Definition
PIN
Definition
11
PGM-IN1
12
PGM-IN2
13
PGM-IN3
14
PGM-IN4
15
PGM-IN5
3
PGM-IN6
6
PVW-IN1
7
PVW-IN2
8
PVW-IN3
9
PVW-IN4
10
PVW-IN5
4
PVW-IN6
5
GND
4
3. SPECIFICATION
LCD Display
Size
13.3 inch
Resolution
1920×1080
Inputs
Video Inputs
4×3G/HD/SD-SDI, 2×HDMI
SDI Input Format
1080p 60/59.94/50/30/29.97/25/24/23.98
1080psF 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50/30/29.97/25/24/23.98
625i 50 PAL, 525i 59.94 NTSC
HDMI Input Format
1080p 60/59.94/50/30/29.97/25/24/23.98/23.976
1080i 50/59.94/60
720p 60/59.94/50/30/29.97/25/24/23.98
576i 50, 576p 50
SDI Video Rate
Auto detection, SD/HD/3G-SDI
SDI Compliance
SMPTE 259M/ SMPTE 292M/ SMPTE 424M
Color Space and Precision
SDI: YUV 4:2:2, 10-bit;
HDMI: RGB 444 8/10/12bit; YUV 444 8/10/12bit;
YUV 422 8/10/12bit
Outputs
PGM Outputs
2×3G/HD/SD-SDI; 1×HDMI Type A
PGM Output Format
1080p 60/50/30/25/24; 1080i 50/60
Multiview Output
1×3G-SDI; 1×HDMI Type A
Multiview Output Format
1080p 60
Audio
Audio Input
1×3.5mm Stereo audio; 1×RCA(L/R)
Audio Output
1×3.5mm Stereo audio; 1×RCA(L/R)
Others
GPIO
Tally
LAN
RJ45
Power
DC 12V, 2A
Consumption
≤ 24W
Operation Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
Operation Humidity
20%~70%RH
Dimension
330×243.5×67mm
Weight
4.4kg
Warranty
2 Year Limited
Accessories
Accessories
1×Power Supply (DC12V 3A)
5
4. FRONT CONTROL PANEL
1
MIXER
Support 2-Ch audio mixing
AFV
Audio follow video mode
2
FADE
Fade transition effect
MIX
Mix transition effect
Wipe transition effect
3
PIP
Picture in Picture
FTB
Fade to Black, used for emergency situation
4
RATE
The transition rate
5
PVW:1-6
Selecting the signal source for Preview
PGM:1-6
Selecting the signal source for Program
6
T-BAR
T-bar Manual Transition
7
MENU
Menu Setting
8
AUTO
Performs an automated switch between Program and Preview.
CUT
Performs a simple immediate switch between Program and Preview.
6
5. OPERATION INSTRUCTION
5.1. Multiview Output Layout
PGM and PVW as Preview and Program displayed as following image. The level meter of PGM audio is
shown only in multiview. SDI/HDMI PGM out is without any overlays.
The following 6 windows come from the 6 input signals.
The lower right corner display of the menu and status information.The CH1,CH2 are the channel selection
of the 2 audio sources for audio mixer.There is a real-time Digital clock/Analog clock displayed beside the
menu.
7
5.2. PGM PVW Switching
5.2.1. PGM, PVW Channel Selection
Below 1-6 buttons from PGM and PVW are corresponding with the 6 windows in the below of the
multiview layout. The selected button from PGM turns on to red LED, and the selected button from PVW
turns on to green LED.
The selected PGM source will circled in red border, while the selected PVW source will be circled in green
border.
For example, switching the PGM source to SDI 1 and PVW source to SDI 2. The button selection as
below.
5.3. Transition Control
There are two transition control types for this video switcher: Transition without effects and Transition with
effects.
1) Transition without Effects
CUT performs a simple immediate switch between Preview and Program views. This is no delay
8
seamless switching and the selected transition effect WIPE, MIX or FADE is not used.
2) Transition with Effects
AUTO performs an automated switch between Preview and Program views. The timing of the
transition is set by the chosen speed button. The selected transition WIPE, MIX or FADE will also be
used.
T-Bar manual transition performs similar to AUTO, but it is more flexible that the timing of the transition
depends on the speed of the manual switch.
5.3.1. FTB (Fade to Black)
Press FTB button it will fade the current video Program source to black. The button will flash to
indicate that it’s active. When press the button again it acts in reverse from complete black to the currently
selected Program video source, and button stop flashing. FTB is usually used for emergency condition.
Note: When the PGM window display black and keep black even after transition, please check if the FTB
button flashing. Press the button again when it is flashing to stop black.
5.4. Audio Mixer Setting
5.4.1. Audio Description
This video switcher is coming with 1 channel 3.5mm Stereo audio & 1 channel RCA(L/R) analog audio
input & output and 4 channel SDI embedded audio.
Table of contents
Other AVMATRIX Switch manuals
AVMATRIX
AVMATRIX HVS0401E User manual
AVMATRIX
AVMATRIX PVS0615U User manual
AVMATRIX
AVMATRIX PVS0613U User manual
AVMATRIX
AVMATRIX HVS0403U User manual
AVMATRIX
AVMATRIX HVS0401 User manual
AVMATRIX
AVMATRIX PVS0615 User manual
AVMATRIX
AVMATRIX HVS0402U User manual
AVMATRIX
AVMATRIX VS0601U User manual
AVMATRIX
AVMATRIX VS0601 User manual
AVMATRIX
AVMATRIX PVS04043U User manual
