AvLab AVLAB-US50 User manual
1. Equalization Dip Switch
2. USB Host: connect to USB host
3. RJ45: Connect to Ethernet cable
4. Ethernet cable Power indicator
5. Ethernet cable Signal indicator
6. USB Device: connect to USB device
Features
• Support four USB peripheral devices
• Support USB 1.0, USB 1.1 and USB 2.0
• Extend the distance up to 264 ft
(80 meters) via Cat6 cable
• Support suspend/resume detection
• Do not require additional drivers
• Support hot plug function
Package contents
• 4-Port USB 2.0 Extender-TX
• 4-Port USB 2.0 Extender-RX
• USB Type-A to Type-B cable
• Power adapter DC 5V/2A
• Quick Start Guide
Layout
TX
RX
7. USB Device: connect to USB device
8. Equalization Dip Switch
9. Power jack: connect to 5V/2A adapter
10.RJ45: Connect to Ethernet cable
11. Ethernet cable Power indicator
12.Ethernet cable Signal indicator
Note:
1. TX & RX have to use the same setting
2. Depend on cable distance and quality
to choose a suitable equalization level
Position Description
PIN#1
PIN#2
OFF[]OFF[]Level 1
Under 160ft
OFF[]ON[]Level 2
Between 160ft to 230ft
ON[]OFF[]Level 3
Between 200ft to 264ft
ON[]ON[]Reserved
Equalization DIP Switch
Use the dip switch to adjust equalization
level for dierent distance
4-Port USB 2.0
Extender
Quick Start Guide
Application
BLANK PAGE
Other AvLab Extender manuals
