Avidsen YLVA 3 User manual
YLVA 3
EN Colour videophone 7”
2 wires
ref. 112266
100m
x2
7”
x6
www.avidsen.com
V1
COLOUR VIDEO INTERCOM 7"
CONTENTS
A - SAFETY INSTRUCTIONS 05
1 - INTRODUCTION 05
2 - MAINTENANCE AND CLEANING 05
3 - RECYCLING 05
B - PRODUCT DESCRIPTION 06
1 - KIT CONTENTS 06
2 - MONITOR 06
3 - INTERCOM PANEL 07
4 - WALL BRACKET 07
5 - MAINS ADAPTOR 07
C - INSTALLATION 08
1 - INSTALLATION OF THE EXTERIOR PANEL 08
2 - INSTALLING THE MONITOR 09
3 - CONNECTIONS 10
3.1 - CONNECTION BETWEEN THE MONITOR AND THE INTERCOM PANEL 11
3.2 - CONNECTIONS 12
3.2.1 - CONNECTIONS 2 MONITORS + 1 INTERCOM PANEL + 1 CAMERA 12
3.2.2 - CONNECTION TO AN ELECTRIC STRIKE PLATE WITH ADDITIONAL
POWER SUPPLY
12
3EN
D - USING THE PRODUCT 13
1 - IDENTIFY AND SPEAK TO THE VISITOR 13
2 - ACTIVATE THE INTERCOM PANEL FROM THE MONITOR 13
3 - OPENING AN ELECTRIC LOCK AND AN AUTOMATIC
CONTROL SYSTEM (OPTIONAL) 13
4 - INTERCOM FEATURE 13
5 - DISPLAY OF ADDITIONAL CAMERA 14
6 - MONITOR SETTINGS 14
E - TECHNICAL AND LEGAL INFORMATION 15
1 - TECHNICAL CHARACTERISTICS 15
2 - WARRANTY 16
3 - HELP AND ADVICE 16
4 - PRODUCT RETURNS/AFTER SALES SERVICE 16
5 - DECLARATION OF CONFORMITY 16
5EN
COLOUR VIDEO INTERCOM 7"
A - SAFETY INSTRUCTIONS
1 - INTRODUCTION
This video intercom system pairs two modules: a
receiver-monitor and an easy-to-install
and use intercom panel.
Key features:
• Colour video reception: when a visitor touches
the intercom panel call button, the panel
immediately transmits the image to the screen
and a chime indicates the visitor's presence.
• Short-circuit protection
• Reverse polarity protection
• Automatic exposure correction: the video
camera automatically adjusts its exposure to
match the ambient light conditions.
• Enables control over two entrances (lock and
automatic control system).
• Integrated infrared vision enables the video
camera to identify visitors without needing
additional light.
• Opening the door and a control system: by
pressing buttons on the monitor, you can
control an electric lock and a dry contact for an
automatic control system (not included).
IMPORTANT: You must read these instructions
carefully prior to installation. In the event of
problems, our Hotline technicians are at
your service for any information.
WARNING: any connection error may
cause damage to the device and void the
warranty.
2 - MAINTENANCE AND CLEANING
Before installing the intercom, it is important to
check the following points:
• Do not install in cases of extreme humidity,
temperatures, corrosion risk or dust.
• Do not expose to direct sunlight, rain, or high
humidity.
• Do not plug the device into a multi-socket plug
adaptor or extension cord.
• Do not install near other electronic devices such
as computers, televisions or video recorders.
• Do not install near acidic chemicals, ammonia
or sources of toxic gases.
• Do not clean with abrasive or corrosive
products. Use a damp cloth with soapy water.
• Unplug the device if it is not being used for an
extended period of time.
• Do not plug the device into national
telecommunications installations.
• The cable between the monitor and intercom
panel must not be extended. Avoid junctions
(insulating screw joints, soldered joints, etc.)
3 - RECYCLING
This logo denotes that devices which are
no longer in use must not be disposed of
as household waste.
They are likely to contain hazardous
substances that are dangerous to both
health and the environment. Return
the equipment to your local distributor or use the
recycling collection service provided by your local
council.
Pour en savoir plus :
www.quefairedemesdechets.fr
6
EN
COLOUR VIDEO INTERCOM 7"
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT
2 - MONITOR
1 4.3" LCD screen
2 Microphone
3 Menu access button (hold 5 secs)
4 Door opening/camera button (if
connected) or top arrow
5 Electric strike plate button or bottom
arrow
6 Handset button to answer calls,
call another monitor (ref. 112279) or
left arrow
7 Surveillance mode to view the intercom panel
or right arrow
1x 1
5x 5 6x 1 7x 1
2x 1 3x 1 4x 5
1 Monitor
2 Intercom panel
3 Monitor wall bracket
4 Dowels (2 for the monitor, 3 for the intercom
panel)
5 Screws (2 for the monitor, 3 for the intercom
panel)
6 Screws for the intercom panel
7 Mains adapter
7
6
2
5
8
10
4
3
1
9
7EN
COLOUR VIDEO INTERCOM 7"
B - PRODUCT DESCRIPTION
8 Loudspeaker
9 Power supply terminals
10 Communication terminals for and to the
other parts of the installation
*Subject to availability.
3 - INTERCOM PANEL
2
1
6
4
5
1 Microphone
2 IR LED
3 Lens
4 Call button
5 Loudspeaker
6 Connection terminals
4 - WALL BRACKET
The monitor is designed to be fixed to the wall. A wall bracket and the necessary fasteners are included.
5 - MAINS ADAPTER
A 230 Vac 50 Hz/17 Vdc 1.5 A mains adapter for powering the monitor is included in the kit. Do not use other
power supplies as they could cause irreparable damage to the device and invalidate the warranty.
Do not cut or shorten the wire of the mains adapter or the warranty will be void.
3
8
EN
C - INSTALLATION
COLOUR VIDEO INTERCOM 7"
The recommended installation height for the intercom panel is about 160 cm from the ground and 150 cm
from the floor for the indoor unit.
50cm
160cm 150cm
70°
NOTE: For obvious safety reasons, the connections must only be made after shutting off the power supply.
1 - INTERCOM PANEL INSTALLATION
The intercom panel must not be directly exposed to bad weather. It should preferably be installed under a
porch or covered area.
Attach the intercom panel hood to your support using the screws and wall plugs suited to the support (the
screws and plugs supplied are suitable for solid walls).
95mm
35mm
ø6 mm
After making the connections on the intercom panel (see the connections paragraph), put the intercom panel
into the hood.
9EN
Then screw the intercom panel to the hood with the screw provided.
Put on the name label.
2 - INSTALLING THE MONITOR
Attach the wall mount to the wall using the screws and wall plugs suited to the support (the screws and plugs
supplied are suitable for solid walls).
After connecting the monitor (refer to the "connections" paragraph), fit the monitor onto its support.
C - INSTALLATION
COLOUR VIDEO INTERCOM 7"
10
EN
C - INSTALLATION
COLOUR VIDEO INTERCOM 7"
60mm
ø6 mm
3 - CONNECTIONS
• Do not increase the number of insulating screw joints or connectors on the connecting wire between the
intercom panel and the monitor
• Keep the connecting wire between the intercom panel and the monitor more than 50 cm away from any
electromagnetic interference (230 V cable, WiFi device, microwave ovens, etc.)
• You can connect and use the electric strike plate (not provided) with your intercom panel, with or
without mechanical memory.
Between the monitor and the intercom panel (100m maximum)
To ensure good audio and video quality, it is advised to not use more than 100m of cable between the
intercom and the intercom panel. Connect the wires as follows (incorrect wiring can damage the intercom
panel).
Other manuals for YLVA 3
1
This manual suits for next models
1
Table of contents
Other Avidsen Telephone manuals
