Avenview SC-HDM2-T4KHD User manual
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
© 2016 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: SC-HDM2-T4KHD
HDMI 2.0a Re-Timer / EDID Recorder
With HDCP 2.2 Support
INTRODUCTION................................................................................................................. 3
FEATURES ............................................................................................................................. 3
PACKAGE CONTENTS ........................................................................................................ 4
SPECIFICATIONS ................................................................................................................ 10
PANEL DESCRIPTIONS ........................................................................................................ 5
APPLICATION DIAGRAM .................................................................................................... 6
INSTALLATION .................................................................................................................... 6
SOFTWARE ........................................................................................................................... 7
TABLE OF CONTENTS
www.avenview.com
REGULATORY NOTICES FEDERATION COMMUNICATIONS COMISSION (FCC)....... 2
SAFETY INSTRUCTIONS..................................................................................................... 1
1 IMPORTANT SAFEGUARDS................................................................................................ 1
1.2
1.3
2.
3.
4.
10.
6.
7.
8.
9.
www.avenview.com Page 1
1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•u se of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview SC-HDM2-T4KHD, 4K60 Scaler with HDCP 2.2 function has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SC-
HDM2-T4KHD should be used with care. Read the following safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERATION COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
El ECTRICAl PARTS. THIS MAY RESULTS IN
ELECTRICAL SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WIll
VOID THE WARRANTY AND CONTINUED USE OF
THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE If RACK MOUNTED OR INSTALLED ON
A SURFACE, IT SHOULD BE IN A GROUNDED
ENVIROMENT.
The SC-HDM2-T4KHD scaler with HDMI 2.0a and HDCP 2.2 Support is a device that can solve EDID
(Extended Display Identification Data) information problems within any system design when different devices with varying
resolutions are connected. With its own control software supplied the user can simply store and recall a default EDID
information, also supporting EDID Re-timer / EDID Recorder setting in non-volatile memory and supports HDCP handshaking.
SC-HDM2-T4KHD allows your HDMI source to boot directly from EDID Reader/Writer/Re-timer mode. This feature allows
the user to easily remove the monitor at any time while installing SC-HDM2-T4KHD between HDMI source and monitor.
Also using the control software user can read,store and modify the EDID of any HDMI/DVI display upload the modified EDID
to displays.
Bonus Feature -Has the abilty to handle many differnt chroma sampling such as 4:2:0, 4:2:2 and 4:4:4
HDMI 2.0a compliant
Supports 4K2K@60 4:4:4 8bits
Supports HDR*, which is 4K2K@60 4:2:0 10bits**
HDCP 2.2 compliant
Supports resolution upscaling from 1080p to 4K2K or downscaling from 4K2K to 1080p (No frame rate conversion)
Supports HDMI signal bypass
Simultaneous HDMI output
Able to read and store the EDID of displays (monitors or projectors)
Able to overwrite the EDID into the EDID Reader/Re-timer or the HDMI displays
Built-in default EDID
Able to maintain HDMI/DVI video resolution
Re-synthesizes input HDMI stream and maintains or improves signal integrity.
2. INTRODUCTION
3.FEATURES
www.avenview.com Page 3
*
HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4
8bits is 594MHz.
Extended Display Identification Data (EDID) is a standard data format that contains basic information about a monitor
and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings,
frequency range limits, and character strings for the monitor name and serial number.
The information is stored in the display and is used to communicate with the system through a Display Data Channel
(DDC), which sites between the monitor and the PC graphics adapter. The system uses this information for
configuration purposes, so the monitor and system can work together.
NOTE
PC SOFTWARE MUST BE USED FOR THE FIRST TIME TO ASSIGN HDMI PORTS
TO SCALE OR BYPASS
Supports 4K2K or 1080p or 720p bypass
Supports 4K downscale to 1080p or upscale 1080p to 4K
SC-HDM2-T4KHD
4.PACKAGE CONTENTS
www.avenview.com Page 4
We highly recommend achieving best results with our SC-HDM2-T4KHD you acquire a high quality 24 or 26AWG HDMI
cable with the below specifications to maintain signal integrity and distances.
Features
•Full UHD 4K/ 60 to 18Gbps High Speed at up to 48 Bit
Deep Color
•UHD 4K/60 to 10.2 Gbps High Speed Deep Color up to 50ft
(Active Series), 25ft Passive
•Full HD Up to 1080p/60 up to 75ft
•True Professional grade heavy-duty 24 or 26 gauge oxygen-
free construction
•ProGrip connector utilizes up to 16 lbs of retention force to
help keep connector in place
•SureLength length indicators on the connector heads make
•it easy to organize for installations
•Available in 7 colors for easy cable identification
•Up to 32 audio channels and 21:9 aspect ratio
•Simultaneous delivery of dual video and audio streams
to multiple users
•Pro Grade Triple Shielding with 2x 100% coverage and 85%
Premium Tinned Copper Braid construction
•Ethernet Capable
•3D Ready
•Supports Deep Color and x.v. Color (Up to 48 Bit)
•5.1/7.1 Lossless Dolby TrueHD and DTS-HD Surround Sound
•Audio Return Channel & Lip-sync
•ATC Certified
•99.9% High Purity Copper Center Conductor
•Molded 24k Gold Plated HDMI male connectors on each end
•X-tra Flex CL3 rated jacket for easy installation
•RoHS Certified
•Lifetime Warranty
Before you start the installation of the scaler, please check the package contents.
1X 1
2X1
USER’S MANUAL X 1
INTERNATIONAL POWER ADAPTER 5V 1.2A
3
4
PC CONTROL SOFTWARE CD X 1
MOUNTING BRACKET X 2
Front Panel
Rear Panel
HDMI 1:Connect to a HDMI display 1HDMI 2 :Connect to a HDMI display 2
6.PANEL DESCRIPTION
www.avenview.com Page 5
1.
Red LED: Power on/off indicator
2.
3.SOURCE: Link to a HDMI source in order to be the
bridge between HDMI source and display
4.
Mini-USB: Connect to a host device for software
operation
5.
Green LED: Green light means the signal detect.
6.
+5V DC: Connect to a 5V power supply unit
MODE: Decide which mode SC-HDM2-T4KHD is
currently working at. MODE:
0 = User define mode
1 - EDID Ultra-HD(4K2K@60) - 24bit 2D video & 7.1ch audio
2 - EDID Ultra-HD(4K2K@60) - 24bit 2D video & 2ch audio
3 - EDID Ultra-HD(4K2K@30) - 24bit 2D video & 7.1ch audio
4 - EDID Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio
5 - EDID Full-HD(1080p@60) - 24bit 2D video & 2ch audio
6 - EDID HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D
video & 2ch audio (bypass only)
7 = [Manual Mode] – Learning EDID from HDMI DISPLAY 2
to HDMI input manually
7.8.
12
3
56
7
4
8
1. Learn the EDID from a HDMI display to the HDMI input manually
1. Connect the display device to the EDID Recorder via HDMI DISPLAY 2.
2. Plug in the 5V DC power supply unit.
3. Set SC-HDM2-T4KHD to the mode 7.
4. The unit can remain at mode 7 until the next EDID learn from another monitor.
2. Recall the EDID from a HDMI display or user defined EDID data via software
1. Set SC-HDM2-T4KHD to mode 0.
2. Connect the display device to the EDID Recorder via HDMI on the Display.
3. Plug in the 5V DC power supply unit.
4. Connect the SC-HDM2-T4KHD to PC via USB cable
5. Click on “Read EDID from Monitor 1”or “Read EDID from Monitor 2” button or load the user defined EDID data.
6. Click on “Write EDID into Device”, the EDID from display will be written to SC-HDM2-T4KHDdevice on mode 0.
7. Hold the mode at 0 until next update the EDID process.
7.APPLICATION DIAGRAM
8.INSTALLATION
www.avenview.com Page 6
Getting Started:
Computer’s System Requirements:
The software supports Windows XP consistently. Both Windows7 and Windows 8 are supported after manually
configuring the compatibility properties.
Windows7 and Windows 8: Please configure the compatibility properties manually.
Step1. Right-click the link for the software that you want to configure, and then click Contents. Step2.
On the Compatibility tab, click Run this program in compatibility mode.
Start Software:
EDID
a) Step 1: Select EDID Source
9.SOFTWARE
www.avenview.com Page 7
Table of contents
