Avantree Repose User manual
Model No.: BTHS-NB20
Avantree Repose
User Manual
REPOSE
User Manual
1
Table of Contents
Product Overview
Button Functions
LED Indicators
Charging the Earbuds
Connecting the Earbuds to Your Device
Specications
FAQ
Contact Us
2
3
3
4
5
7
8
9
Product Overview
ON OFF PAIR
ON / OFF
/
Multifunctional button
L
LED status indicator
LED charging indicator
Charging port
1
2
3
A
B
REPOSE
User Manual
2
EN
LED Indicators
Button Functions
Switch to "ON / OFF" position to turn the
earbuds on / o
No. Button Functions
Press & hold for 3 seconds to enter pairing mode
Tap once to play / pause
Tap once to accept / end call
Press & hold for 2 seconds to reject call
Press & hold“+ / -” for 2 seconds to
skip / replay track
Tap“+ / -” once to increase / decrease volume
ON OFF
PAIR
1
2
3
No. Status
Charging
Low battery
Power on
Power o
Connected
Disconnected
Out of range
Indicator & Voice Prompt
Solid red
Red ash every 5 seconds
Solid blue
Solid red for 1 second then o
LED o, "CONNECTED" voice indicator
Solid blue
Blue ash every 5 seconds
Alternate red & blue ashes, "PAIRING"
voice indicator Pairing
A
B
REPOSE
User Manual
3
EN
Charging the Earbuds
Battery Low
L
1.5H
Low Full
L
The earbuds' LED will ash red every 5 seconds to indicate low battery.
Plug the provided micro USB charging cable into the charging port, then
connect the other end to a 5V/500mA-2A rated USB adapter (your
phone charger or similar should work) or PC USB port.
Solid red lights on the earbuds indicate that charging is in progress;
once the lights turn o, your earbuds will be at full battery.
REPOSE
User Manual
4
EN
Connecting the Earbuds to Your
Device
STEP 1
Turn on the earbuds. For rst time use, the earbuds will enter PAIRING
mode automatically.
If not, put your earbuds into PAIRING mode by pressing & holding the
PAIR button until the LED ashes red & blue alternately.
STEP 2
Turn on your device's Bluetooth and select "Avantree Repose" in the
Bluetooth menu.
L
L
Hold for 3s
ON
5
REPOSE
User Manual
EN
NOTE: You'll need to adjust the volume on both the earbuds &
your phone to reach the lowest volume levels.
STEP 3
Keep the earbuds close to your device and wait for 5-10 seconds or until
they connect. Once they're successfully connected, the earbuds' LED
indicator will turn o.
For subsequent use, your earbuds should automatically reconnect to the
last-paired device within a few seconds of being turned on. If not, you
can manually activate reconnection by tapping the PAIR button once, or
by selecting "Avantree Repose" in your device's Bluetooth menu.
L
Accessory
Accessory
Avantree Repose
Avantree Aria
MY DEVICES
“Connected"
REPOSE
User Manual
6
EN
v5.0Bluetooth version
Audio codec support
Supported proles
Operating range
Playtime
Max volume
Charging time
Impedance
Frequency response
Power port
Power supply
Weight
FastStream, SBC
HSP v1.2, HFP v1.6, AVRCP v1.4, A2DP v1.2
Up to 30ft / 10m
Up to 18hrs
~1.5hrs
6mm
16Ω
20Hz - 20KHz
Micro USB
5V/500mA-2A rated USB charger
29g
96 dB
Specications
Drivers
REPOSE
User Manual
7
EN
FAQ
Below are some of the most common questions people have during
setup.
What’s the best way to take care of & maintain upkeep for my
earbuds?
Regularly cleaning your earbuds before and after use not only protects
them from potential damage, but also helps eliminate sound muing
issues. You can use dry cotton swabs or similar to gently wipe dust,
earwax, and oil from the earbud tips on a regular basis in order to
maintain upkeep.
Can I replace the earbud tips?
Unfortunately, no. The Repose is designed with smaller-than-average
earbud tips that are optimized for sleeping comfort, so the tips are not
replaceable. You can return your Repose within 60 days of purchase for
a full refund as long as nothing has been damaged or broken. Please
free to check out NB18 & NB16 to see if they’d better suit your needs!
Can I connect the earbuds to my TV?
You can technically connect your Repose directly to a smart TV via the
TV's built-in Bluetooth, but doing so will result in signicant audio
delays. In order to utilize the Repose's FastStream codec for no lip-sync
delays, you'll need to pair with a transmitter that also supports
FastStream, such as the Avantree Orbit or Audikast.
You can nd a full FAQ list at avantree.com/support/repose, or contact
us directly for additional assistance.
REPOSE
User Manual
8
EN
Contact Us
Support Tickets avantree.com/submit-a-ticket
FAQ avantree.com/support/repose
USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
Product Registration avantree.com/product-registration
REPOSE
User Manual
9
EN
Table of contents
Other Avantree Headphones manuals
Avantree
Avantree BTHS-TWS115 User manual
Avantree
Avantree Sacool BTHS-AS8 User manual
Avantree
Avantree AH6B User manual
Avantree
Avantree HT381 User manual
Avantree
Avantree ADHF-039 User manual
Avantree
Avantree HT41899 User manual
Avantree
Avantree Ace 130 User manual
Avantree
Avantree BTHS-AS9S User manual
Avantree
Avantree Sacool Pro User manual
Avantree
Avantree Jogger AS6 Instruction manual
Avantree
Avantree BTHS-ANC032 User manual
Avantree
Avantree BTHS-TWS106 User manual
Avantree
Avantree BTHS-TWS115 User manual
Avantree
Avantree BTHS-TWS120-BLK User manual
Avantree
Avantree BTHT-4186 User manual
Avantree
Avantree BTHS-136 User manual
Avantree
Avantree BTHS-NB17 User manual
Avantree
Avantree BTHS-TWS109 User manual
Avantree
Avantree AH5 User manual
Avantree
Avantree TWS116 User manual
