Avalue Technology RiPac-10P1 User manual
RiPac-10P1
10” Mini POS
Quick Reference Guide
Draft – 01 April 2016
RiPac-10P1
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
This guide is designed for experienced users to setup the system within the shortest
time. For detailed information, please always refer to the electronic user's manual.
Copyright ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Brand and product names are trademarks or registered trademarks of their respective
owners.
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described
product(s), conveys no license or title under any patent, copyright, or masks work rights to
these products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We
make no representation or warranty that such application will be suitable for the
specified use without further testing or modification.
2 RiPac-10P1 Quick Reference Guide
RiPac-10P1 Quick Reference Guide 3
Quick Reference Guide
OUR PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
A critical component is any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
Customer Services
Each and every product is built to the most exacting specifications to ensure reliable
performance in the harsh and demanding conditions typical of industrial
environments. Whether your new device is destined for the laboratory or the factory floor,
you can be assured that your product will provide the reliability and ease of operation.
Your satisfaction is our primary concern. Here is a guide to our customer services. To
ensure you get the full benefit of our services, please follow the instructions below
carefully.
4 RiPac-10P1 Quick Reference Guide
RiPac-10P1
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
Quick Reference Guide
RiPac-10P1 Quick Reference Guide 5
Content
1. Getting Started ........................................................................................................ 6
1.1 Safety Precautions .................................................................................................... 6
1.2 Packing List ............................................................................................................... 6
1.3 System Specifications ............................................................................................... 7
1.4 System Overview ...................................................................................................... 9
1.4.1 Top View ............................................................................................................................ 9
1.4.2 Left Side ............................................................................................................................. 9
1.4.3 Right Side ........................................................................................................................... 9
1.4.4 Bottom ...............................................................................................................................10
1.4.5 I/O Interface .......................................................................................................................10
1.5 System Dimensions ................................................................................................ 11
1.5.1 RiPac-10P1 .......................................................................................................................11
2. Hardware Configuration ....................................................................................... 12
2.1 RiPac-10P1 Connector Mapping ............................................................................. 13
2.1.1 Serial Port Connector (COM) .............................................................................................13
2.1.2 RJ11 Connector .................................................................................................................13
2.1.3 RJ45 ..................................................................................................................................14
2.1.4 DC Jack .............................................................................................................................14
3. Peripherals............................................................................................................. 15
3.1 Wi-Fi, Bluetooth....................................................................................................... 16
3.1.1 WLAN Key Features ..........................................................................................................16
3.1.2 Bluetooth Key Features ......................................................................................................16
3.1.3 Specifications ....................................................................................................................16
3.2 NFC ......................................................................................................................... 18
3.2.1 Features ............................................................................................................................18
3.2.2 Application .........................................................................................................................18
3.3 Thermal Printer ....................................................................................................... 18
3.3.1 Thermal Printer Specifications............................................................................................18
3.4 Second Display ....................................................................................................... 19
3.4.1 Second Display ..................................................................................................................19
3.4.2 Second Display Specifications ...........................................................................................19
4. Hardware Maintenance ......................................................................................... 20
4.1 Paper Roll Loading .................................................................................................. 21
4.2 Replacement of Thermal Printer Module ................................................................. 24
RiPac-10P1
6 RiPac-10P1 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x RiPac-10P1
1 x 19.5V Adapter
1 x Power Cord
2 x Thermal Printer Paper Holder
Quick Reference Guide
RiPac-10P1 Quick Reference Guide 7
1.3 System Specifications
System
Processor Intel Atom Z3735F 1.33GHz Processor
Memory 2GB DDR3L SDRAM
Wireless LAN Built-In IEEE 802.11 b/g/n
Bluetooth Built-In Bluetooth 4.0 + Class 1
Operating System Windows 10 (32 bit) / Android 4.4.4 (64 bit)
Panel
LCD Panel 10.1" LCD, 5" LCD (customer side) (Optional)
Resolution 1280 x 800 (10.1"), 1280 x 800 (5")
Touch Screen Projected Capacitive Touch
Storage
Solid State Drive 32GB (Default)/ 64GB (Optional) eMMC
External I/O
Serial Port 2 x RS232 in DB9, Powered with 5/12V
USB Port 4 x USB 2.0
LAN Port 1 x RJ45
Cash Drawer 1 x RJ11
NFC ISO/IEC 14443 A/B, 15693/18092
Thermal Printer
Printing Method Thermal Dot Line Printing
Total Dots Per Line 576 Dots
Resolution (W)8 Dots/mm, (H)8 Dots/mm
Max. Print Speed 200mm/s
Max. Print Width 72mm
Max. Paper Width 80mm
Paper Cutting Full Cut & Partial Cut
Mechanical
Power Type 19.5V/6.15A 120W Adapter
Power Connection Type DC Jack
Dimension (L)299 x (W)316.2 x (H)148.9
Weight 3KG±10%
Color Black & Gray
Fanless Yes
Reliability
Certifications CE/FCC
Operating Temperature 5°C ~ 40°C
Operating Humidity 0~95% Non-Condensing
RiPac-10P1
8 RiPac-10P1 Quick Reference Guide
Storage Temperature -10°C~60°C
Note: Specifications are subject to change without notice.
Quick Reference Guide
RiPac-10P1 Quick Reference Guide 9
1.4 System Overview
1.4.1 Top View
1.4.2 Left Side
1.4.3 Right Side
Printer Door Switch
10.1” LCD
5” LCD
Thermal
Printer
Speaker
RiPac-10P1
10 RiPac-10P1 Quick Reference Guide
1.4.4 Bottom
1.4.5 I/O Interface
Connectors
I/O Function Note
COM Serial port connector (RS232) DB-9 male connector
RJ11 Cash drawer connector
LAN 1x RJ45 connectors
USB 4 x USB2.0 connectors
Kensington
Lock Kensington Security Slot
DC-in DC Power-In connector
Power Button
SW2 Switch
COM COM RJ11 RJ45 USB2.0 Kensington DC-in
Other manuals for RiPac-10P1
1
Table of contents
Other Avalue Technology Touch Terminal manuals
Avalue Technology
Avalue Technology Rity 10R Series User manual
Avalue Technology
Avalue Technology RIPAC-10P3 User manual
Avalue Technology
Avalue Technology RIVAR-1501 User manual
Avalue Technology
Avalue Technology RITY102 User manual
Avalue Technology
Avalue Technology RiPac-10P1 User manual
Avalue Technology
Avalue Technology MTP-1702 User manual
