Avalue Technology HID-2334 User manual

DMR No: T54268-00 Part No: E2017H340A3R

Rev: 4th

Avalue Intelligent Display & System

HID-2334

23.8” Ultra-Light Medical Cart Panel PC with

Multi-touch Function

User Manual

4th Ed- 22 July 2020

HID-2334 User Manual

HID-2334 Quick Reference Guide

Instructions for the User

The document combines text and illustrations, providing a comprehensive overview of

the system. The information is presented as a sequential steps of actions, allowing

the user to learn directly how to use the device. The text provides explanations and

instructs the user step-by-step in the practical use of the product, with short, clear

instructions in an easy-to-follow sequence.

Minimum at least 18 years old and basically reading experience.

Read and understand “westernized Arabic numbers” when written in Arial font,

basically can distinguish human organs and understands hygiene.

Languages as specified in the marketing plan (Ext: Chinese, English….).

For general function operation, no special experience needed for user. For

maintenance project, no special experience needed. Basically mechanical tool

operation knowledge needed when install mounting means (One support system

capable of wall-mounting or base.), please contact a service technician or your

retailer.

Purposes and Applications

HID-2334 is intended to be used in healthcare institutions for general purpose as an

assisting device for data access –patient information, medical records, media

services, and so on. The product is designed for general or special use in the hospital

environment.

Operating principle

A Medical Panel PC has four main components: the arithmetic logic unit (ALU), the

control unit, the memory, and the input and output devices (collectively termed I/O).

These parts are interconnected by buses, often made of groups of wires.

The control unit, ALU, and registers are collectively known as a central processing

unit (CPU). Inside each of these parts are thousands to trillions of small electrical

circuits which can be turned off or on by means of an electronic switch. Each circuit

represents a bit (binary digit) of information so that when the circuit is on it represents

a "1", and when off it represents a "0" (in positive logic representation). The circuits

are arranged in logic gates so that one or more of the circuits may control the state of

one or more of the other circuits.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Definitions

Warning! A WARNING statement provides important information about a

potentially hazardous situation which, if not avoided, could result in death

or serious injury.

Caution! A CAUTION statement provides important information about a

potentially hazardous situation which, if not avoided, may result in minor

or moderate injury to the user or patient or in damage to the equipment

or other property.

Attention! Un avertissement fournit des informations importantes sur une situation

potentiellement dangereuse qui, si elle n'est pas évitée, peut entraîner la

mort ou des blessures graves.

Précaution! Une mention ATTENTION fournit des informations importantes sur une

situation potentiellement dangereuse qui, si elle n'est pas évitée, peut

entraîner des blessures mineures ou modérées pour l'utilisateur ou le

patient ou des dommages à l'équipement ou à d'autres biens.

Note! A NOTE provides additional information intended to avoid inconveniences

during operation.

Safety Instructions

1. Strictly follow these Instructions for Use, please read these safety instructions

carefully.

2. Remind to keep this User's Manual for later reference, and any use of the product

requires full understanding and strict observation of all portions of these instructions.

Observe all WARNINGS and CAUTIONS as rendered throughout this manual and on

labels on the equipment.

3. Repair of the device may also only be carried out by MANUFACTURER.

Warning! Because of the danger of electric shock, never remove the cover of a

device while it is in operation or connected to a power outlet.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Attention! En raison du risque de choc électrique, ne retirez jamais le couvercle

d'un appareil lorsqu'il est en fonctionnement ou connecté à une prise de

courant.

4. If one of the following situations arises, get the equipment checked by

MANUFACTURER:

The power cord or plug is damaged.

Liquid has penetrated into equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the user's

manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

5. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning and keep this equipment away from

humidity.

Caution! To avoid short-circuiting and otherwise damaging the device, do not allow

fluids to come in contact with the device. If fluids are accidentally spilled

on the equipment, remove the affected unit from service as soon as

possible and contact the service personnel to verify that patient safety is

not compromised.

Précaution! Pour éviter tout court-circuit et autrement endommager l'appareil, ne

laissez pas de liquides entrer en contact avec l'appareil. Si du liquide est

accidentellement renversé sur l'équipement, retirez l'unité affectée du

service dès que possible et contactez le personnel d'entretien pour

vérifier que la sécurité du patient n'est pas compromise.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it

fall may cause damage. For plug-in equipment, the power outlet socket must be

located near the equipment and must be easily accessible.

Caution! To prevent overheating, do not cover the openings and place the device in

direct sunlight or near radiant heaters.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Précaution! Pour éviter la surchauffe, ne couvrez pas les ouvertures et placez

l'appareil à la lumière directe du soleil ou à proximité de radiateurs

rayonnants.

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet. Position the power cord so that people cannot step on

it. Do not place anything over the power cord. If the equipment is not used for a long

time, disconnect it from the power source to avoid damage by transient over voltage.

Caution! Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20°C (-4°F) or above 60°C (140°F). this

may damage the equipment.

Précaution! Ne laissez pas cet équipement dans un environnement non contrôlé où

la température de stockage est inférieure à -20 °C (-4 °F) ou

supérieure à 60 °C (140 °F). cela pourrait endommager l'équipement.

8. If your computer is losing dramatic time or the BIOS configuration reset to

default, the battery has no power.

Caution! Do not replace battery yourself. Please contact MANUFACTURER. The

computer is provided with a battery-powered real-time clock circuit. There

is a danger of explosion if battery is incorrectly replaced. Replace only

with same or equivalent type recommended by the manufacture. Discard

used batteries according to the manufacturer’s instructions.

Précaution! Ne remplacez pas la batterie vous-même. Veuillez contacter le

FABRICANT. L'ordinateur est équipé d'un circuit d'horloge en temps réel

alimenté par batterie. Il existe un risque d'explosion si la batterie n'est pas

remplacée correctement. Remplacez uniquement par un type identique

ou équivalent recommandé par le fabricant. Jeter les piles usagées conformément

aux instructions du fabricant.

9. Improper installation of VESA mounting can result in serious personal injury! VESA

mount installation should be operated by professional technician, please contact the

service technician or your retail if you need this service.

HID-2334 User Manual

HID-2334 Quick Reference Guide

10. Environmental protection: follow national requirements to dispose of unit.

11. Maintenance: to properly maintain and clean the surfaces, use only the approved

products or clean with a dry applicator.

12. Make sure the user not to contact SIP/SOPs and the patient at the same time.

13. When networking with electrical devices, the operator is responsible for ensuring

that the resulting system meets the requirements set forth by the following standards:

–EN 60601-1 (IEC 60601-1)

Medical electrical equipment

Part 1: General requirements for safety

–EN 60601-1-1 (IEC 60601-1-1)

Medical electrical equipment

Part 1-1: General requirements for safety

Collateral standard: Safety requirements for Medical electrical systems

–EN 60601-1-2 (IEC 60601-1-2)

Medical electrical equipment

Part 1-2: General requirements for safety

Collateral standard: Electromagnetic compatibility; Requirements and tests

14. Accessory equipment connected to the analog and digital interfaces must be in

compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950

for data processing equipment, IEC 60065 for video equipment, IEC 61010-1 for

laboratory equipment, and IEC 60601-1 for medical equipment.) Furthermore, all

configurations shall comply with the system standard IEC 60601-1-1. Everybody who

connects additional equipment to the signal input part or signal output part configures

a medical system, and is therefore, responsible that the system complies with the

requirements of the system standard IEC 60601-1-1. The unit is for exclusive

interconnection with IEC 60601-1 certified equipment in the patient environment and

IEC 60601-1 certified equipment outside of the patient environment. If in doubt,

consult the technical services department or your local representative.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Caution! Use suitable mounting apparatus to avoid risk of injury.

Précaution! Utilisez un appareil de montage approprié pour éviter tout risque de

blessure.

15. Use a power cord that matches the voltage of the power outlet, which has been

approved and complies with the safety standard of your country.

Note! Environmental protection Follow national requirements to dispose of unit.

Warning! Do not modify this equipment without authorization of the manufacturer.

Warning! To avoid risk of electric shock, this equipment must only be connected to a

supply main with protective earth.

Caution! This adapter EDAC EM11011M(18) is a forming part of the medical device.

Attention! Ne modifiez pas cet équipement sans l'autorisation du fabricant.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Attention! Pour éviter tout risque de choc électrique, cet équipement ne doit être

connecté qu'à une alimentation avec terre de protection.

Précaution! Cet adaptateur EDAC EM11011M(18) fait partie intégrante du dispositif

médical.

16. The design of Internal Smart battery is considered for backup purpose while

system accidently loosing main power supply in any situation, it will supply max.6mins

of the operating time to keep let user backup the data and shut down the system

properly.

Caution! Do not attempt to disassemble the battery pack. There is danger of

excessive temperatures, fire or explosion if the battery is incorrectly replaced. Please

contact with MANUFACTURER to replace battery packs.

Caution! Do not use the power adapter that isn’t made for the equipment, supplying

the equipment with inappropriate voltage may cause harm to the battery (if any) or

even worse burn the equipment.

Précaution! Do not attempt to disassemble the battery pack. There is danger of

excessive temperatures, fire or explosion if the battery is incorrectly replaced. Please

contact with MANUFACTURER to replace battery packs.

Précaution! Do not use the power adapter that isn’t made for the equipment,

supplying the equipment with inappropriate voltage may cause harm to the battery (if

any) or even worse burn the equipment.

HID-2334 User Manual

HID-2334 Quick Reference Guide

Caution! Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of

Used Batteries According to the Instructions."

Attention! Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez

les piles usagées selon les instructions

HID-2334 User Manual

HID-2334 Quick Reference Guide

Explanation of Graphical Symbols

Warning: dangerous voltage

Caution

Note

ISO 7000-1641: Follow operating instructions or Consult

instructions for use.

Direct current.

Equipotential

Stand-by

US Conformance

Follow the national requirements for disposal of equipment.

This manual suits for next models

Table of contents

Other Avalue Technology Touch Panel manuals

Avalue Technology

Avalue Technology AID-173SHR User manual

Avalue Technology

Avalue Technology BFC-07R1 User manual

Avalue Technology

Avalue Technology CCD-07W01 User manual

Avalue Technology

Avalue Technology VNS-15W01 User manual

Avalue Technology

Avalue Technology LPC-0807 User manual

Avalue Technology

Avalue Technology ECM-BDWH User manual

Avalue Technology

Avalue Technology RPC-0801-910 User manual

Avalue Technology

Avalue Technology PPC-1529 User manual

Avalue Technology

Avalue Technology ARC-1533 User manual

Avalue Technology

Avalue Technology ASM-BYT User manual

Avalue Technology

Avalue Technology SID-21W04 User manual

Avalue Technology

Avalue Technology ARC-1535 User manual

Avalue Technology

Avalue Technology ARC-1532-C1 User manual

Avalue Technology

Avalue Technology OFT-07W33 User manual

Avalue Technology

Avalue Technology OFP-15W33 User manual

Avalue Technology

Avalue Technology RITY153 User manual

Avalue Technology

Avalue Technology SPC-2133 User manual

Avalue Technology

Avalue Technology ARC-1538-B User manual

Avalue Technology

Avalue Technology OFP-21W33 User manual

Avalue Technology

Avalue Technology MTP-1233 How to use

Avalue Technology

Avalue Technology OFP-07W33 User manual

Avalue Technology

Avalue Technology BFC-10W9 User manual

Avalue Technology

Avalue Technology LPC-1503 User manual

Avalue Technology

Avalue Technology ARC-1033 User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

Advantech

Advantech TPC-30 Series user manual