Avalla D-3 User manual
Vacuum Cleaner
D-3 D-5 D-9 D-50 D-70
Read this manual carefully before use and keep it for future
reference. Failure to do so may result in injury, property
damage and may void the warranty.
avalla.com
02 En
Contents
02 Contents
04 Quick start guide: D-3
• Parts guide
05 • Assembly and operation
06 Emptying and Cleaning: D-3
07 Charging: D-3
08 Quick start guide: D-5
• Parts guide
09 • Assembly and operation
• Control panel
10 Emptying and Cleaning: D-5
11 Charging: D-5
12 Quick start guide: D-9
• Parts guide
13 • Assembly and operation
• Control panel
14 Emptying and Cleaning: D-9
15 Charging: D-9
16 Quick start guide: D-50
• Parts guide
17 • Assembly and operation
• Control panel
18 Emptying and Cleaning: D-50
19 Charging: D-50
20 Quick start guide: D-70
• Parts guide
21 • Assembly and operation
• Control panel
22 Emptying and Cleaning: D-70
23 Charging: D-70
24 Cleaning
• M-Glide head D-3
25 • M-Glide head D-5
26 • M-Glide head D-9
27 • M-Glide ZeroX head D-50/D-70
28 Health and safety
• General safety instructions
• Disposal
30 Troubleshooting
30 Specifications
Version 1.0
03En
iBuy your spare filters and accessories at: www.avalla.com
04 En
Quick start guide: D-3
Parts guide
01. Power trigger
02. Dust bin
03. Battery
04. Battery indicator
05. T.Link connection
06. Extension tube
07. M-Glide floor brush
Caution: Make sure the unit is switched off before swapping parts.
Make sure attachments are securely locked in place before use.
Focus tool
Charging dock
Brush tool
01
02
03
04
05
06
05
07
05En
Assembly and operation
• Attach your chosen accessory
• Press and hold the ‘Power trigger’ to turn the D-3 on.
• Press the ‘Power trigger’ to switch to high speed.
• Press the ‘Power trigger’ again to turn the D-3 off.
Any of the accessories can be attached to the extension tube or
directly to the body giving you a portable and versatile vacuum
cleaner, suitable for any situation.
06 En
Emptying and Cleaning: D-3
Emptying the dust bin
• Press the ‘Lock’ to release the ‘Dust bin lid’.
• Empty the ‘Dust bin’.
Cleaning the bin/filters
• Twist the bottom of the ‘Dust bin’ anti-clockwise to release.
• Twist the ‘Stainless steel pre-filter’ anti-clockwise to unlock it.
• Remove the ‘Stainless steel pre-filter’ and ‘HEPA filter’.
• Wipe the ‘Stainless steel pre-filter’ with a damp cloth.
• The ‘HEPA filter’ can be brushed off, it should be replaced when
heavily soiled.
• Wipe the ‘Dust bin’ with a damp cloth.
• Air dry all parts before re-assembly.
• Attach the bottom of the ‘Dust bin’ and twist clockwise to lock.
• Reinsert the ‘HEPA filter’ into the ‘Stainless steel pre-filter’.
• Reinsert the ‘ Stainless steel pre-filter’ into the ‘Dust bin’, line up
the tabs and twist clockwise to lock it.
• Close the ‘Dust bin lid’.
08. Dust bin
09. Lock
10. Dust bin lid
12
11
10
09
08
11. HEPA filter
12. Stainless steel pre-filter
07En
Charging: D-3
The D-3 can be charged in two ways; via the wall mounted
‘Charging dock’ or by plugging the unit in directly.
Charging dock
• Find a suitable place to mount the ‘Charging dock’.
• Mount the ‘Charging dock’ using appropriate screws and wall
plugs.
• Plug the power adaptor into the side of the ‘Charging dock’.
• To charge the D-3 clip it into the ‘Charging dock’.
• The ‘Battery indicator’ will flash to show the charge level.
• To remove the vacuum cleaner from the dock, press the ‘Charger
release’ and the vacuum cleaner will unlock.
Direct charge
• Plug the power adaptor into the ‘Charging port’.
• The ‘Battery indicator’ will flash to show the charge level.
Battery
• To remove the battery, press the ‘Battery release’.
• Slide the battery up to remove it from the main body.
• To re-install the battery, slide the battery down the guides and
press into place until it clicks.
13. Charger release
14. Power in
15. Mounting holes (x4)
16. Charging port (base of unit)
17. Battery release
(one on each side of battery)
13
14
15
16
17
i
08 En
Quick start guide: D-5
Parts guide
Focus tool Brush tool
Caution: Make sure the unit is switched off before swapping parts.
Make sure attachments are securely locked in place before use.
03
01. Power input
02. Battery (underside of unit)
03. Control panel
04. Dust bin
05. T.Link connection
06. Extension tube
07. M-Glide floor brush
01
02
04
05
06
05
07
09En
Assembly and operation
Control panel
Any of the accessories can be attached to the ‘Extension tube’
or directly to the body giving you a portable and versatile
vacuum cleaner, suitable for any situation.
• Press ‘Power’ to turn the unit on.
• The unit will turn on in Auto mode and adjust speed
automatically.
• Press ‘Speed’ to select Low, Medium or High speed.
• Press ‘Power’ again to turn the unit off.
08. Dust bin release
09. Battery indicator
10. Mode indicator
11. Speed
12. Power
12
11
10
09
08
i
10 En
Emptying and Cleaning: D-5
16
17
15
14
13
Emptying the dust bin
• For easy emptying, pull the ‘Dust bin release’ and lift the ‘Dust
bin’ up and away from the main body.
• Press the ‘Lid lock’ to release the bin lid.
Cleaning the bin/filters
• Twist the ‘Stainless steel pre-filter’ to the unlocked position and
lift it from the ‘Dust bin’.
• Remove the ‘HEPA filter’ using the tab.
• Wipe the ‘Stainless steel pre-filter’ and ‘Dust bin’ with a damp
cloth.
• Allow all parts to air dry fully before reassemble.
• Re-insert ‘HEPA filter’ into top of the ‘Stainless steel pre filter’,
ensure tab is facing up in correct orientation.
• Slide the ‘Stainless steel pre-filter’ back into the ‘Dust bin’, take
care to ensure tabs line up and filter is seated fully. Twist to lock
into place.
• Re-attach ‘Dust bin’ to main body, slide the ‘Dust-bin’ onto the
body and press down until it clicks into place.
13. Dust bin release
14. Lid Lock
15. HEPA filter
16. Stainless steel pre-filter
17. Dust bin
This manual suits for next models
4
Table of contents
