Auvi WIP20S Manual

WIP20

Regulatory Compliance Notices

Troubleshooting

System Requirements

Auvi Technologies “Auvi” shall not be liable for any errors contained herein or

for any damages arising out of or related to this document or the information

contained herein, even if Auvi has been advised of the possibility of such

damages. This document is intended for informational and instructional

purposes only. Auvi reserves the right to make changes in the specifications

and other information contained in this document without prior notification.

Auvi disclaims any obligation to update the information contained herein.

Auvi Technologies, Auvi design and Vision Beyond Sound are trademarks or

registered trademarks of Auvi Technologies LLC in the United States and/or

other countries. Windows is a trademark or registered trademark of Microsoft

Corporation in the United States and/or other countries. Skype is a trademark

or registered trademark of Skype Technologies S.A. in the United States

and/or other countries. TeleVoce and TeleVoce logo are trademarks or

registered trademarks of TeleVoce, Inc. in the United States and/or other

countries.

All other product names may be trademarks of the companies with which they

are associated.

Auvi Technologies

5988 Mid Rivers Mall Drive

St. Charles, MO 63304

World Wide Web address:

http://www.auviworld.com

http://www.auvivoip.com

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected;

• Consult the dealer or an experience radio/TV technician for help.

The FCC requires the users to be notified that any changes or modifications

made to this device that are not expressly approved by the party responsible

for compliance may void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

Under the environment with radio frequency interference, the sample may

generate a tone and resume to normal operation when the interference stops.

The unit may generate a tone when there is radio interference appeared on the

power lines. The unit will revert to normal operation when the interference stops.

Warning: To reduce risk of electric shock, do not directly or indirectly (through

a phone) connect the device to a PSTN wall outlet.

Skype™ is running but I do not hear a dial-tone - Adjust the speaker sound level

and make sure the Auvi Interface application is running.

When listening to music through the audio out jack, I hear music when I

answer an incoming call - Turn off or pause the music program you are using.

The person on the other end of the conversation cannot hear me - Open up

the mic sound level and make sure that the mic is not on mute. If you have multiple

mic-in jacks make sure that the correct one is connected to the WIP20.

For additional troubleshooting issues and Frequently Asked Questions on the

WIP20, visit the Support page at www.auvivoip.com.

For Skype™ software inquiries, visit www.skype.com.

•

Windows® XP only

•

Pentium MMX® 400MHz or higher

•

CD disk drive

•

128MB minimum RAM

•

5MB free space minimum on hard drive

•

Available microphone and speaker audio jacks

•

Analog traditional or cordless telephone with DTMF tone dialing feature

•

Broadband or dial-up Internet connection

WIP20S

Connect telephone cord Power in

Audio in

Mic in

Audio out

Designed

for

Skype™

For customer inquiries:

[email protected]

636-447-4005

Printed in China

MIC / SPKR

cables

Phone

cord

Computer InternetWIP20Standard phone

If you have just finished installing the installation CD and clicked

Download Skype, you will be redirected to the Skype download

page. If not, open an Internet browser and enter: www.skype.com.

1. Click the Download Skype button on the web page.

2. Then click the Download Skype for Windows latest version

and save it onto your computer.

3. After downloading, double-click the SkypeSetup.exe file.

4. Follow the on-screen directions.

5. Once you have installed Skype, the “Create a new Skype

account” window will appear. In the “New Users – Create a

Skype Account” tab, enter the required information.

6. Follow the instructions until an account has been set up.

1. Log-in to Skype account.

2. Launch Auvi Interface program.

The following window will appear. Click the circle next to “Allow this

program to use Skype”, then click OK.

For all operation of the Skype service, whether through the WIP20 or

the Skype application itself, the computer must be on with an Internet

connection. Log-in to your Skype account and launch the Auvi

Interface program.

Add contact to Auvi Interface Contact List

1. Click Contacts.

2. Click New. Fill in the required information and assign

speed-dial number.

3. Click Save.

To make a call through telephone handset:

1. Pick up the telephone receiver and listen for a dial-tone.

2. Dial the two-digit speed-dial number of the contact you wish

to call, followed by the # sign.

To receive a call through telephone handset:

1. When the phone connected to the WIP20 rings, answer it

like any other phone and talk.

NOTE: For a complete list of current features using the WIP20 with

the Skype service, go to www.auvivoip.com.

Installing WIP20 to computer

Unpack box contents

Install CD

Launch program

Download and install Skype™

Quick start guide

WIP20

3.5mm-to-3.5mm

line-in cords (2)

AC adapter

Installation CD

1. Plug the pink line-in cord in the Mic In jack and the green

line-in cord to the Audio In jack of the WIP20 adapter.

2. Plug the other ends of the pink and green line-in cords to the

corresponding color jacks on the computer (MIC and SPKR).

NOTE: If external speakers are plugged into the SPKR

jack (green cord), remove the jack of the speakers and

plug it directly into the Audio out jack on the WIP20.

3. Plug the AC adapter into the WIP20 and the other end into

an electrical outlet. A green light indicator will blink when

the box is powered on.

4. On the front of the WIP20 connect a traditional or cordless

phone into the RJ-11 jack.

NOTE: Do not connect a telephone line that is plugged into a wall

outlet directly into the front of the WIP20. If this happens, the WIP20

could possibly be damaged and this will void the limited warranty of

the product.

1. Insert Installation CD into CD-ROM drive of the computer.

2. Follow the on-screen instructions.

3. Click Finish after program has installed.

NOTE:NOTE: If you have installed the installation CD for the first time, the

program will ask to log-in to Skype or to download Skype and create

an account. If you already have a Skype account, go to step 5.

Basic functions

Another program is trying to access skype. This can be a potential security risk.

What would you like to do?

Name: SkypeInterface.exe

Publisher: TeleVoce Inc.

Allow this program to use Skype

Allow this program to use Skype, but ask again in the future

Do not allow this program to use Skype

What does this mean?

Another program wants to use Skype

Other manuals for WIP20S

Other Auvi Telephone Accessories manuals

Auvi

Auvi WIP20S Instruction Manual

Popular Telephone Accessories manuals by other brands

IAI

IAI CON-T operating manual

BT DIVERSE 5400 user guide

Tadiran Telecom

Tadiran Telecom EMERALD ICE installation manual

Musicam

Musicam FieldFone II user guide

Polycom

Polycom KIRK KIRK 4040 Features guide

TIPTEL

TIPTEL DECT Set 50 user manual

Panasonic

Panasonic KX-UDS124 installation guide

BT BT7600 Quick setup and user guide

Panasonic

Panasonic KX-TVP100E Guide

View

View VP-PC installation guide

Baldwin Boxall

Baldwin Boxall BT8 operating instructions

SMC Networks

SMC Networks SMCDPCR-AP specification

SkyLink

SkyLink SD-001 user manual

Nera

Nera ISDN user guide

MCheeta

MCheeta CT-CID803 Plus user manual

YASKAWA

YASKAWA YRC1000 instructions

Intellitouch

Intellitouch MOH-500E Specifications

Viking

Viking SQRG-12 Technical practice