CRI205 High pressure common rail injector tester user manual V1.0
as Bosch, Denso, SIEMENS, CUMMINSand Delphi to drive high pressure common rail injectors. When
the oiler is working, the drive signal parameters can be set by the user according to their actual
conditions, and can be saved in groups, which is convenient for maintenance personnel to judge and
repair the working status of the high-pressure common rail injector under different working
conditions.
1.2 About safety
To ensure safe operation, please follow the following rules:
1. In the process of operating the tester, the operator should wear safety glasses;
2. Use independent dedicated sockets and perform reliable grounding. The power cord of this
tester is a three-wire plug, which is connected to a standard three-wire socket, please ensure reliable
grounding;
3. If the power supply voltage is unstable, please connect the tester to the power supply regulator
for use;
4. Regularly check whether the AC power cord is damaged, and whether there is dust accumulation
on the power plug or power socket;
5. If the tester is abnormal, or emits an abnormal sound or smell, or the tester becomes too hot to
touch, please stop using it immediately and unplug the AC power cord and all other connecting wires
from the power socket;
6. If the tester fails, please contact the after-sales service personnel to get the necessary help;
1.3 Use and maintenance
1. Do not throw, drop or step on the tester to avoid strong external impact;
2. Do not insert foreign objects into the connector part of the tester;
3. Do not allow water or other liquids to flow into or on the tester;
4. Do not touch the terminals of the AC power cord with wet hands;
