Autonics GP Series User manual
© Copyright Reserved Autonics Co., Ltd. iii
GP-XBM (RS485)
Solution Guide
ii © Copyright Reserved Autonics Co., Ltd.
© Copyright Reserved Autonics Co., Ltd. 3
Preface
Thank you very much for selecting Autonics products.
Please familiarize yourself with the information in this manual and in the product manuals before using
them.
This solution guide contains information about a specific architecture solution and does not replace any
specific product documentation.
This document does not attempt to describe the entire solution architecture and configuration but only
introduce some basics procedures. Customization of this solution can be made by the users in respect of
safety laws and regulations.
4 © Copyright Reserved Autonics Co., Ltd.
Document Guide
This manual provides procedure steps for a particular solution architecture. It does not offer any
guarantee concerning matters beyond the scope of this manual.
This manual may not be edited or reproduced in either part or whole without written permission
of Autonics.
This manual is not provided as part of the product package. Please visit our home-page
(www.autonics.com) to download a copy.
The content of this manual may vary depending on updates of the product software and others
unforeseen developments within Autonics. It is subject to change without prior notice. Upgrade
notices are published through our homepage.
We contrived to describe this manual the easiest and more accurate way. However, if there are
any corrections required or questions, please notify us these remarks on our homepage.
© Copyright Reserved Autonics Co., Ltd. 5
Document Symbols
Symbol
Description
Additional information about a particular feature.
Failure to follow instructions can result in serious injury or death.
Failure to follow instructions can lead to a minor injury or product
damage.
An example of the concerned feature's use.
※1
Annotation mark.
6 © Copyright Reserved Autonics Co., Ltd.
Document Version History
Date
Version
Author
Description
December 17th 2016
v1.0
기술지원팀 - YCG
Document creation
August 8th 2017
v2.0
기술지원팀 - GTE
Document revision and template update
Add several sections
September 15th
2017
v2.0.1
기술지원팀 - GTE
Minor text updates
© Copyright Reserved Autonics Co., Ltd. 7
Table of Contents
Preface.................................................................................................................3
Document Guide .................................................................................................4
Document Symbols.............................................................................................5
Document Version History.................................................................................6
Table of Contents................................................................................................7
1Solution Overview.......................................................................................9
1.1 Solution description 9
1.2 Solution components and version 9
1.3 Solution architecture 10
1.4 Communication cable pin details and dimensions (Autonics model: C3M5P03-
D9M0-W4*0) 10
2GP-S070 Communication Settings..........................................................12
2.1 GP-Editor project settings 13
2.2 GP-S070 Ethernet communication settings for GP-Editor 14
2.3 Send GP-Editor project to GP-S070 device by Ethernet 18
2.4 GP-S070 serial communication settings for XBM PLC 19
3XBM Project Settings................................................................................22
4GUI Example..............................................................................................26
4.1 Solution overview 26
4.1.1 GP-S070 drawing (in GP-Editor from Autonics) 26
4.1.2 PLC program (in XG 5000 from LS) 26
4.2 GP-S070 –XBM connection 26
4.3 GP Editor graphic 27
4.3.1 Numeral display 27
4.3.2 Numeral input 28
4.3.3 Touch key (Up key) 29
4.3.4 Touch key (Down key) 30
4.3.5 Lamp 31
4.3.6 Touch key (Reset key) 32
4.3.7 Graphic result 33
5Appendix....................................................................................................35
5.1 Serial communication settings 35
5.1.1 Change CH1 communication settings in GP-Editor 35
5.1.2 Change CH1/CH2 communication settings in the GP device 37
6Troubleshooting........................................................................................38
6.1 GP-S070: language settings 38
8 © Copyright Reserved Autonics Co., Ltd.
1 Solution Overview
© Copyright Reserved Autonics Co., Ltd. 9
1Solution Overview
1.1 Solution description
Autonics GP-S070-T9D6 device from the GP/LP series is a 7.0 inch LCD color touch panel with
build-in serial connection through RS-422 and RS-232C ports. It is a standalone screen with custom OS
and dedicated graphic editor software to create up to 500 graphic pages.
Thanks to its characteristic, it can be added on top of any existing automation architecture with
different type of serial connection and can monitor different devices parameters or statuses and key
Setting Values or Present Values, facilitating the access to data that was not in the previous architecture.
This solution brings following benefits to your current installation:
Allows to monitor in real time PLC & devices status and feedback values
Allows a convenient control of the different parameters and setting values
Allows a fast and clear notification of the different alarms
This solution is optimized because:
Can be simply added on top of your current installation
Very small dimension so can be installed close to the controlling device for or local control
Internal graphics and control functions for standalone application without need of server or OS
licensing.
1.2 Solution components and version
Hardware / Software
Version
Note
Ms Windows
Win 7
GP-Editor
v4.01 (build 023)
Autonics product. Release 2016.10.13
GP-S070 T9D6
Firmware v1.20
Autonics product. Release 2016.01.26
XG-5000
v4.20
LS product. Release 2017.03.24
XBM-DN32S(Cnet)
LS product
Serial Cable
Autonics ref. C3M5P03-D9M0-W4*0
1 Solution Overview
10 © Copyright Reserved Autonics Co., Ltd.
1.3 Solution architecture
1.4 Communication cable pin details and dimensions
(Autonics model: C3M5P03-D9M0-W4*0)
Other manuals for GP Series
9
This manual suits for next models
1
Table of contents
Other Autonics Touch Panel manuals
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
