AUTO-XS 44266 User manual
USA 800-505-8311 acs@americancustomerservice.com
12/2015Product Code: 44266
2
AFTER SALES SUPPORT • SERVICIO POSVENTA
DISTRIBUTED BY / DISTRIBUIDO POR:
ALDI INC., BATAVIA, IL 60510
www.aldi.us
User Guide
Manual
del usuario
YEAR WARRANTY
AÑOS DE GARANTÍA
CAR ACCESSORIES
600 PEAK BATTERY AMP JUMP STARTER
ARRANCADOR DE BATERÍA CON
AMPERAJE PICO DE 600 AMPERIOS
English...Page 3
Español...Página 13
Contents
Overview .................................................................................. 03
Operating Instructions and User Cautions ............................. 04
First Aid For Battery Acid Contact .......................................... 06
Charging/recharging ................................................................ 06
Unit & Specification.................................................................. 08
Correct Procedure For Jump-Starting A Vehicle .................... 09
Using 12V DC Power Port of Power Pack ................................ 10
Battery Status Monitor.............................................................. 10
12 Volt DC Charging Method.................................................... 10
Charging/Recharging Using the 120 Volt AC
Charger and a Standard Household Extension Cord .............. 11
USB Charging Port.................................................................... 11
LED Work Light ........ ............................................................... 11
Trouble Shooting ........ ............................................................. 12
5
7
Overview3
1
1
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
10
12
11
Input Socket for DC Power Charger
Red LED for Battery Charging & Yellow LED for Maintaining Battery
12 Volt Power Port for 12 Volt Accessories
Battery Status LED Indicators with Button Switch
Easy Carry Handle
On/Off Main Power Pack Switch
USB 2.4A Charging Port
On/ Off Light Switch
LED Work Light
Booster Clamps
120 Volt Built-in Plug
12V DC charge cord with cigarette lighter plug
5
800-505-8311[email protected]
Operation/User Cautions
4
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
Congratulations on your purchase of a AUTO XS Portable Power Pack.
The AUTO XS Portable Power Pack offers convenient, portable power
wherever and whenever you need it.
Jump-start your automobile, truck, motorcycle, boat, RV or tractor, or
take it along as portable power for your
12 volt devices.
The 2.4 Amp USB plug has plenty of power to charge cell phones,
tablets and other devices - and features
an connection sensor that automatically switches off the port when it’s
not needed, saving energy.
Compact and lightweight, the unit includes an LED Flashlight that’s
handy for nighttime roadside repairs, or use with camping and other
outdoor activites.
Operating Instructions and User Cautions
CAUTION: Before using this product, read this manual and follow all
Safety Rules and Operational Instructions.
IMPORTANT - BEFORE USE
Please recharge Power Pack a minimum of every 2 months. Always
recharge after use.
WARNING
WARNING
Thank you for buying the AUTO XS
Portable Power Pack. SAVE THESE
INSTRUCTIONS. This Owner’s
Manual contains important safety
and operating instructions.
Risk of SERIOUS INJURY OR DEATH.
ELECTRICAL SHOCK, EXPLOSION, FIRE, AND EYE
INJURY HAZARDS.
PROTECT YOURSELF AND OTHERS.
Before use, READ AND UNDERSTAND the
manufacture’s instructions and Owner’s Manual and
User Guide.
Failure to read and understand this information could
result in SERIOUS INJURY or DEATH.
DO NOT REMOVE OR COVER THIS INFORMATION.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
Consult your local yellow pages
directory under the category "recycling"
to locate a battery recycle in your area.
RECYCLE
LEAD
RETURN
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
800-505-8311 [email protected]
Operation/User Cautions
5
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
NOTE
CAUTION
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
SAFETY FIRST "Failure to heed these warnings may result in
personal injury, blindness, loss of life and/or damage to
machineries or power pack unit."
"When working with lead acid batteries, always use
eye goggles. Contact with battery acid may cause
blindness and/or severe burns."
• There is a risk of explosive gases being released when batteries are
being charged or discharged.
accident.
y occur.
• Never allow battery clamps to touch each other or another common
metal conductor - This can cause damage to the unit and/or create
dangerous sparks/explosion hazards.
s
battery system.
n the
positive (Red) jumper cable next.
• When charging unit from a 120-volt AC electrical outlet, the outlet
being used should be protected by a ground fault interrupt (GFI)
switch.
• To avoid electrical shock, do not allow the electrical cords and outlets
to get wet.
• Perform jump start procedures only in a safe, dry, well ventilated area.
• When using this unit close to the vehicle's battery and engine, place
cords, clothing and body parts away from moving vehicle
components.
• Keep unit out of reach of children when in storage or while in use.
• Before disposing of battery, protect terminals with heavy duty
800-505-8311[email protected]
Charging/Recharging
6
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
FIRST AID FOR BATTERY ACID CONTACT:
• SKIN: Rinse area of acid contact with water, then wash thoroughly with
soap and water. Seek immediate medical attention if redness, pain or
irritation occurs.
ately for
a minimum of 15 minutes then immediately seek medical attention.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: This product or its power cord contains lead, a chemical
known to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
CHARGING/RECHARGING
Lead-acid batteries require routine maintenance to ensure a full charge
and long battery life.
All batteries lose energy from self-discharge over time; more rapidly at
higher temperatures.
Therefore, batteries need periodic charging to replace energy lost
through self-discharge.
When the unit is not in frequent use, manufacturer recommends the
battery be recharged at least every 30 days.
The unit’s on-board circuitry is a revolutionary smart system that deter-
mines the battery voltage based on organic feedback, and quickly and
full charge, without overcharging. The power pack can be left connected
WARNING: Never attempt to use the AC and DC charging methods at
the same time. Note: This unit is delivered in a partially charged state –
should be min. of 36 hours.
Recharging battery after each use will prolong battery life; and prepare
the unit for frequent heavy discharges
CAUTION
SAFETY FIRST Failure to follow these statements
may result in damage to vehicles, appliances, and the
power pack unit.
800-505-8311 [email protected]
Charging/Recharging
7
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
• Recharge the power pack immediately after each use.
• Turn switch to OFF position when unit is being charged or when not in use.
• Always switch to OFF position before connection to a power source/load.
• This system is designed to be used only on vehicles with 12-volt DC
battery systems. Do not connect to a 6-volt or 24-volt battery system.
• Check for damaged parts. A part that is damaged should be properly
repaired or replaced by an authorized service center before further use
unless otherwise indicated elsewhere in this instruction manual. Have
defective switches replaced by authorized service center. Do not use
power pack if switch does not turn unit on and off.
• This power pack employs parts (switches, relays, etc.) that produce
arcs or sparks. Therefore, if used in a garage or enclosed area, the unit
• Do not use this unit to operate appliances that need more than 12
amps to operate from the 12 volt DC accessory outlet.
• Do not insert foreign objects into either the USB outlet or the 12 volt
DC accessory outlet.
• Vehicles that have on-board computerized systems may be damaged if
vehicle battery is jump started. Before jump starting, check vehicle's
• Excessive engine cranking can damage a vehicle's starter motor. If the
engine fails to start after the recommended number of attempts,
discontinue jump start procedure and look for other problems that may
need to be corrected.
• Although this unit contains a non-spillable battery, it is recommended
that unit be kept upright during storage and usage. To avoid possible
damage that may occur to the power pack - avoid direct sunlight,
direct heat, and moisture.
• Before each use, check unit for wear and tear. Replace worn or defec
tive parts by calling our customer service # 800-505-8311.
• Do not attempt to jump start a frozen battery.
• This unit will not operate appliances and equipment that produce heat,
such as hair dryers, microwave ovens, and toasters.
IMPORTANT - BEFORE USE
hours.
Please recharge Power Pack a minimum of every 2 months. Always
recharge after use.
800-505-8311[email protected]
Unit Specifications
8
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
5
1
2
3
4
5
6
7
8
9
10
10
12
11
5
UNIT FEATURES
1. Input Socket for DC Power Charger
2. Red LED for Battery Charging & Yellow
LED for Maintaining Battery
3. 12 Volt Power Port for 12 Volt Accessories
4. Battery Status LED Indicators with Button Switch
5. Easy Carry Handle
6. On/Off Main Power Pack Switch
7. USB 2.4A Charging Port
8. On/ Off Light Switch
9. LED Work Light
10. Booster Clamps
11. 120 Volt Built-in Plug
12. 12V DC charge cord with cigarette lighter plug
44266 SPECIFICATIONS
Battery Type: 12 volts DC, Maintenance-free, Sealed lead-acid
AGM,
Battery Ampere: 12 volts,600 Peak Battery Amps@77F
Power Peak Ampere: 12 volts DC, 200 Amps, maintain above 7.2 volts
for 5 seconds @ 77F
Area Light: 1 long-life white LED
USB Port: 5V DC, 2400m A
DC Accessory Outlet: 12V DC, 12A
800-505-8311 [email protected]
Jump Starting Procedure
9
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp Jump Starter
1. Turn vehicle ignition and all accessories such as
lights, radio, air conditioner, “OFF”.
2. Make sure all switches on the Power Pack are
turned off (“OFF” position for the Power Pack
Booster Cable Switch - see “A” at left).
3. Securely connect the red (+) clamp to your vehicle
battery’s positive (+) battery terminal (see: “B” at
left).
4. Connect the black (-) clamp to your battery's
negative (-) battery terminal or to a non-moving
metal part of the vehicle (see: “C” at left).
5. Turn Power Pack Booster Cable Switch to “ON”
position
(see: “D” at left).
6. Turn vehicle ignition “ON” and crank the engine
in 3-5 seconds bursts until engine starts.
If vehicle does not start after trying 3 times, check
the battery status and electrical system.
7. After vehicle starts, turn the Power Pack Booster
Cable Switch to “OFF” position. Disconnect the
clamp.
8. If the connections to
the battery’s POSITIVE
and NEGATIVE terminals
are incorrect, the
Reverse Polarity
Indicator will light (red)
and the unit will sound
a beep. Disconnect
clamps and reconnect to
battery with correct polarity.
Make sure unit switch is in the
“OFF” position before connecting
power clamps
Securely connect the red (+) clamp
to your vehicle battery’s positive (+)
battery terminal. Connect the black (-)
clamp to your battery's negative (-)
battery terminal OR to a non-moving
metal part of the vehicle
Turn Switch on Power Pack to
ON position; start vehicle
B
C
A
D
CORRECT PROCEDURE FOR JUMP-STARTING A VEHICLE
If vehicle does not immediately start, turn Power
Pack Booster Cable Switch “OFF” and wait 3
minutes before trying again (failure to wait may
damage Power Pack, vehicle’s starter or electrical
system).
800-505-8311[email protected]
Power Port/Battery Status/12V Charging
10
AFTER SALES SUPPORT
USA
USA
600 Peak Battery Amp
Jump Starter
Green Light: Fully Charged
Amber Light: Battery Usable
Red Light: Recharge Necessary
– Do Not Use without recharge
Using 12V DC Power Port of Power Pack
Convenient and simple to use anywhere, the
AUTO XS Power Pack has a 12 Volt plug for all
your 12 Volt accessories.
1. Remove the protective cover.
2. Plug in your 12-volt accessory.
Note: The AUTO XS Power Pack has a 12 amp
automatic overload protection circuit breaker.
Battery Status Monitor
With the AUTO XS Power Pack, you can tell at a
glance how much charge your Power Pack has ready.
1. Before checking the battery status and to receive
an accurate reading, unplug the AC or DC charging
adapter from the unit and wait for few minutes for
correct status reading.
2. Press and hold the Battery Test Button.
3. The Battery Level Indicator LEDs will illuminate to
indicate the amount of charge remaining in the
Power Pack.
12 Volt DC Charging Method
Charging the unit from an external 12 volt DC power
source requires the use of the approved 12 Volt DC
cord. This cord has a male DC connector at each
end (see: “A” at left).
1. Insert the cigarette lighter plug of 12 Volt DC
charge cord into the vehicle’s 12 volt DC accessory
outlet (see: “B” at left).
2. Insert the other end of the plug into the DC input
socket on the front panel of the unit (see: “C” at left).
3. Charge the unit until the green FULL indicator
lights when the Battery Test Button is pressed (with
the DC adapter unplugged from the unit). DO NOT
CHARGE MORE THAN 6 HOURS MAXIMUM
USING THIS METHOD.
4. When charging is complete, remove the charging
cord and store in a safe place.
Note: Some vehicles require that the ignition be
switched to the accessory outlet position in order to
power the accessory outlet.
DO NOT LEAVE THE UNIT UNATTENDED WHEN
CHARGING USING THIS METHOD.
C
B
A
Table of contents
Languages:
Other AUTO-XS Remote Starter manuals
